Integrated Circuit

PM-MOSFET-SIC-SBD~-SP3F

IC AUTHENTICATION CHIP

Security ICs / Authentication ICs ECC/ECDH 10Kb, 3-CONTACT, SWI, Bulk

Security ICs / Authentication ICs ECC/ECDH, I2C, small 3K reel UDFN

The RN4020-V/RM is a Microchip Bluetooth 4.1 module with built-in antenna, supporting 1 Mbps data rate over the 2.4 GHz band in a 24-lead rectangular module package. It provides a complete Bluetooth Low Energy solution with integrated stack and UART interface for rapid wireless development. Available worldwide with 12-week lead time for IoT sensor and wearable device applications.

8-bit Microcontrollers - MCU CAN-FD, 128KB Flash, 13KB RAM, 12b ADC3, UTMR, DAC, Comp, PWM, CCP, CWG, HLT, WWDT, SCAN/CRC, ZCD, PPS,Comms IDLE/DOZE/PMD, JTAG

Supervisory Circuits 5Pin uP Reset Mon 2.93V Reset Thresh

Switching Controllers 16 VQFN 3x3x0.9mm T/R

The USB7206T/KDX is a USB 3.1 Gen 2 6-port hub controller from Microchip supporting data rates up to 1250 Mbps in a 100-pin VQFN package. It integrates I2C, SPI, I2S, and SMBUS interfaces with a 25 MHz internal clock for USB expansion in embedded platforms. In stock worldwide with fast shipping.

Microchip PIC32MZ2025DAK176-V/2J is a 32-bit cache-based MCU with integrated graphics controller, running at up to 64 MHz in a 176-pin LQFP package with 24-bit address bus and ADC. Designed for graphical HMI and industrial embedded applications.

TQFP-48 / A�/ 32-bit Arm Cortex-M0+ with 5V Support 256KB

8-bit Microcontrollers - MCU Op Amp, 64KB Flash, 4K RAM, 512 EEPROM, 12b ADCC, 8b DAC, DMA, 16-bit PWM, PPS, UART, SPI/I2C

DIP-16

MICROCHIP - PIC16LF1823-I/SL - 8 Bit MCU, Flash, PIC16 Family PIC16F18XX Series Microcontrollers, PIC16, 32 MHz, 3.5 KB, 14 Pins

The SST26VF040AT-104I/SN is a 4 Mbit NOR Flash memory from Microchip supporting SPI, SDI, and SQI interfaces at up to 104 MHz on a 2.3 V to 3.6 V supply in an 8-pin SOIC package. It provides 100,000 write-erase cycle endurance and 100-year data retention for embedded code storage.

16 Mbit (x8) Multi-Purpose Flash Plus

NOR Flash 2.7 to 3.6V 16Mbit Multi-Purpose Flash

5-Volt 32-Bit ARM Cortex M0+ MCU with CAN-FD

PD39210 is a Microchip IEEE 802.3bt Power over Ethernet PSE controller supporting up to 90 W Type 4 PD power delivery with integrated detection and classification. It manages 2 ports with Class 0–8 support and is housed in a Quad Flat No-Lead package. Available from stock with worldwide shipping.

Microchip PIC24FJ128GL305-E/PT is a 16-bit XLP microcontroller with 128KB ECC Flash and 8KB RAM, operating at up to 48 MHz (16 MIPS). It integrates an LCD controller, 12-channel 10-bit ADC, and boundary scan in a 48-pin TQFP package. Optimized for extended-temperature industrial and consumer HMI applications.

Microchip SST39VF1682-90-4C-EKE is a 16 Mbit NOR Flash memory organized as 2M x 8 bits with 90 ns access time, 48-pin TSOP package, and 2.7 V to 3.6 V operating voltage. It features sector erase and full-chip erase for embedded systems. Available worldwide with fast shipping.

AVR64DA32-I/PT is an 8-bit AVR microcontroller from Microchip running at up to 24 MHz with 64 KB Flash, on-chip ADC and DAC channels, and a rich peripheral set. It operates across 1.8 V to 5.5 V in a 32-pin TQFP package, targeting IoT sensors, home appliances, and industrial control designs requiring analog integration.

The Microchip AVR64DA48-I/PT is an 8-bit AVR microcontroller with 64 KB flash and a 48-pin TQFP package, running at up to 24 MHz with integrated ADC, DAC, and multiple communication peripherals. Available in stock worldwide with fast shipping.

Use the download button to access the BM83SM1-00AB schematic symbol, PCB footprint, and 3D model.

The AVR64DA32-I/RXB is an 8-bit AVR microcontroller running at up to 24 MHz with 64 KB Flash, integrated ADC, DAC channels, and 32-pin VQFN packaging for embedded control. It belongs to Microchip's AVR DA family featuring analog peripherals and a modern core for low-power IoT and industrial applications. Available in a compact 5×5 mm VQFN-32 package for surface-mount assembly.

AVR128DB64-I/PT is an 8-bit AVR microcontroller from Microchip in a 64-pin TQFP package, featuring 128 KB flash, 24 MHz clock, 12-bit ADC, DAC, Op-Amp, UART, SPI, TWI, MVIO, and ZCD for mixed-signal embedded control. It operates up to 85°C and provides expanded I/O for complex peripheral interfacing. Available worldwide with a 7-week factory lead time.

Use the download button to access the TC6320TG-G schematic symbol, PCB footprint, and 3D model.

IC MOTOR DRVR 4.75V-5.25V 24QFN

The Microchip PD39208 is a Power over Ethernet (PoE) PSE manager IC providing centralized power delivery management for multi-port IEEE 802.3af/at/bt PoE systems with up to 8 ports. It integrates port detection, classification, and power budget management in a compact QFN package. Used in enterprise switches, industrial PoE hubs, and IP camera infrastructure requiring intelligent per-port power control.

8-bit Microcontrollers - MCU 7KB Flash, 512B RAM, 10b ADC, 2x PWM, 2x CCP, HLT, WDT, PPS, EUSART, SPI/I2C, XLP SLEEP Mode

The DSPIC33CK32MC103-I/M5 is a 16-bit digital signal controller from Microchip featuring 32 KB of Flash memory, a 64 MHz single-core DSC engine with hardware fixed-point DSP, and motor control peripherals in a compact 36-pin UQFN package. It targets brushless DC and permanent magnet motor drive, power conversion, and embedded control applications requiring high-speed signal processing.

The PIC32MK0512MCJ048-I/7MX is a 32-bit PIC32MK microcontroller with 512 KB Flash memory, running up to 64 MHz, featuring motor control peripherals and CAN-FD connectivity in a compact 48-pin uQFN package operating from 3.0 V to 3.6 V.

Microchip PIC32MK1024GPK064-I/PT is a 32-bit MIPS-based microcontroller with 1MB Flash and 256KB RAM running up to 64 MHz. Integrates dual USB interfaces, 12-bit ADC, DAC, and boundary scan in a 64-pin TQFP package. Suited for general-purpose embedded applications requiring USB connectivity and high computational throughput.

The PIC32MK1024MCM100-I/PT is a 32-bit MIPS-based microcontroller with 1 MB Flash memory, 64 MHz clock, dual USB, CAN-FD, motor control features, and 100-pin TQFP package for industrial applications.

PIC16F15214T-I/SN is an 8-bit PIC16 microcontroller from Microchip in an SOIC-8 package, operating at up to 32 MHz with a minimum supply voltage of 1.8 V. It integrates an ADC and is designed for compact, low-power embedded applications. Available with worldwide shipping and a 6-week factory lead time.

AT30TS74-UFM11-T is a Microchip integrated circuit for PCB-level interconnects, replacement sourcing, or production BOMs. Key specs include 4 pins, -40°C to 125°C operating range, BGA. From inquiry pricing, in stock sourcing, and worldwide shipping support.

Microchip PIC32MK0256GPG048-I/Y8X is a 32-bit MIPS-core microcontroller with 256 KB Flash and up to 64 MHz operation in a 48-pin TQFP, featuring ADC and 3.0–3.6 V supply, suited for general-purpose embedded control without CAN-FD.

The ATSAMD51J19A-AUT is a 32-bit ARM Cortex-M4F microcontroller from Microchip with 512KB Flash and 192KB SRAM running at up to 120 MHz in a 64-pin TQFP package. It features FPU, DSP instructions, USB Full Speed, and multiple serial interfaces for IoT, wearable, and industrial control applications.

Digital Signal Processors & Controllers - DSP, DSC 16 Bit DSC, 32KB Flash, 8KB RAM, 100MHz, 28Pin, 3 OpAmp, 1 Comp, PTG

PIC16LF1847-I/SO is an 8-bit PIC16 microcontroller from Microchip operating at up to 32 MHz with 8 KB Flash and a minimum supply voltage of 1.8 V at 16 MHz. It includes an integrated ADC and fits in an 18-pin SOIC package for compact, low-power embedded designs. Suitable for battery-powered sensors, consumer appliances, and industrial control nodes.

Use the download button to access the BM83SM1-00TA schematic symbol, PCB footprint, and 3D model.

U2270B-MFPY, 16-Pin SOIC

Microchip PIC32MK0512MCJ064-I/R4X is a 32-bit PIC32MK MCU with 512 KB flash, 64 MHz clock, CAN-FD, motor-control peripherals, and boundary scan support in a 64-pin QFN package operating from a 3 V to 3.6 V supply. Available from stock with worldwide shipping.

The MCP16311-MNY is a 30V input, 1A synchronous step-down DC-DC converter from Microchip with integrated high- and low-side switches for high efficiency across a wide load range. It features adjustable output voltage and operates in PFM at light loads. Ideal for industrial 24V systems, battery-powered IoT devices, and embedded processor supply rails.

Microchip Technology MIC5528-3.3YMT-TR, LDO Voltage Regulator Controller, 500mA, 3.3 V, ±3% 6-Pin, TDFN

GREEN, PLASTIC, LCC-44

LDO Voltage Regulators 150mA uCap LDO Regulator

Microchip USB7051T-I/KDX is a 4-port USB 3.1 Gen1 hub controller with a native USB Power Delivery Type-C upstream port and mixed Type-C PD plus Type-A downstream ports in a 100-pin QFN package rated for industrial temperatures. It supports data rates up to 5 Gbps per port and 625 MBps aggregate transfer. Available in stock worldwide with fast shipping.

UPD301B-I/KYX is a stand-alone USB Type-C Power Delivery source-only port controller from Microchip with 2-channel capability, supporting USB PD 3.0 negotiation in a compact QFN-40 package. From $3.00 in stock with worldwide shipping.

Microchip MCP33151-10T-E/MS is a 14-bit, 1 Msps single-channel single-ended SAR ADC in a compact MSOP-10 package, offering 0.75 µs conversion time and a 5.1 V analog input range for high-speed data acquisition designs.