Integrated Circuit

LT3991IMSE-5#PBF is a 55V, 1.2A step-down switching regulator with 2MHz switching frequency and ultra-low 2.8µA quiescent current, ideal for battery-powered and industrial applications requiring high efficiency.

LTC6090IFE-5#PBF is a single, precision, rail-to-rail output operational amplifier from Analog Devices rated for ±70V/140V supply, 126 dB minimum CMRR, and 1.25 mV max offset voltage in a 16-pin TSSOP-EP package. From $8.20, in stock, worldwide shipping.

The AD2S44-TM18B is a dual-channel synchro/resolver-to-digital converter IC from Analog Devices, offering up to 18-bit resolution with built-in test capability and a 26 V reference input, ideal for precision motion control and positioning systems.

Analog Devices LTC2864IDD-1#PBF is a full-duplex RS-422/RS-485 transceiver operating at up to 20 Mbps with ±60 V fault protection and differential Schmitt trigger inputs. Housed in a 10-pin DFN package for low-profile industrial and communications designs. Available from $4 in stock with worldwide shipping.

The LTC6655BHMS8-1.25#TRPBF is a precision 1.25 V voltage reference featuring ultra-low noise and tight output accuracy of 1.2496–1.2503 V. It integrates a single three-terminal reference in an SO-8 package. Available from stock with worldwide shipping.

LDO Voltage Regulators 300mA Low Noise LDO

Single Channel, 32-Position, I2C, ±8% Resistor Tolerance, Nonvolatile Digital Potentiometer

LDO Voltage Regulators Adj Low Dropout Pos VR 3A

Analog Devices LTC3588EDD-1#PBF is a piezoelectric energy harvesting PMIC with an integrated full-wave bridge rectifier and synchronous buck converter in a compact 10-pin DFN package. It accepts 2.7 V to 18 V from piezo transducers and provides selectable 1.8 V, 2.5 V, 3.3 V, or 3.6 V regulated output. Ideal for batteryless wireless sensor nodes harvesting mechanical vibration energy in IoT and industrial monitoring.

LT6203CMS8#PBF Analog Devices, Op Amp, RRIO, 90MHz 10 kHz, 3 V, 5 V, 8-Pin MSOP

LDO Voltage Regulators 1.1A Adjustable, Single resistor LDO

The LT1991AIMS#PBF is a precision gain-selectable operational amplifier with 100 dB CMRR and a maximum bias current of 7.5 nA, packaged in an SOIC-8 form factor. It supports programmable gain configurations and is ideal for precision data acquisition, instrumentation amplifier, and signal conditioning applications.

100V Isolated Flyback Controller 16-Lead Plastic MSOP

Analog Devices LTC4315IDE#PBF is a 2-wire I2C/SMBus bus buffer with high noise margin, FAULT detection, and SBDR disable function. It supports I2C Fast Mode up to 400 kHz and operates in a compact 12-lead DFN package for industrial signal integrity.

Analog Devices LTC2067IMS8#TRPBF is a dual zero-drift operational amplifier with 10 µA supply current per channel and 35 pA maximum input bias current at 25°C. Featuring 123 dB typical CMRR and a voltage-feedback architecture in an 8-pin SOIC tape-and-reel package, it suits precision industrial and medical measurement designs demanding long-term DC accuracy.

Analog Devices LTC3875IUJ#PBF is a dual 2-phase synchronous buck controller with DCR sensing and temperature compensation operating from 4.5V to 38V input. It delivers adjustable output from 0.6V to 5V using current-mode PWM in a compact QFN package. Available from distributors worldwide.

Analog Comparators Comparator-CMl 13GHz

Switching Controllers Active Bias Controller 16 Lead 3x3 mm SMT Package: 9 mm²

The LT3489EMS8E#PBF is a 2.5A, 2MHz current-mode step-up DC/DC switching regulator from Analog Devices. It accepts input voltages from 2.6V to 16V and uses pulse width modulation for efficient power conversion. Packaged in an MS8E (MSOP-8) footprint, it suits compact power supply designs requiring high efficiency.

Analog Devices LT8643SIV-2#PBF is a high-efficiency synchronous step-down DC-DC converter with 42 V input and 7 A output capability using current-mode PWM control. Features external voltage compensation for flexible loop tuning across 3.4 V to 42 V input range. Available from stock worldwide with fast shipping.

Analog Devices LTM8023EV#PBF, DC-DC Power Supply Module 2A 36 V Input, 200 → 2400 kHz 50-Pin, LGA

LDO Voltage Regulators Fixed 5Vout 3A Low Dropout Regulators with Micropower Quiescent Current and Shutdown

LT8330EDDB#TRMPBF is a 1 A, 2 MHz low quiescent current boost and inverting DC-DC converter from Analog Devices, operating from 3 V to 40 V input. It supports SEPIC topology and uses current-mode PWM control in a compact DDB package for space-constrained power supply designs.

Analog Devices LTC7000EMSE#PBF is a fast 150V protected high-side NMOS static switch gate driver in a 16-pin MSOP package. It features Schmitt trigger inputs, open-drain output, and internal bootstrap charging for reliable high-voltage gate control. Suited for hot-swap controllers, solid-state relays, and high-voltage load switching applications.

The LT1490AHMS8#TRPBF is a dual Over-The-Top rail-to-rail input and output operational amplifier from Analog Devices, featuring 72 dB common-mode rejection ratio and a maximum input offset voltage of 3200 µV. Housed in an 8-pin MSOP package, it accepts common-mode inputs beyond the positive supply rail, making it ideal for high-side sensing and microprocessor supervisory circuits. Available in tape-and-reel, lead-free PBF format for automated assembly.

8-bit Microcontrollers - MCU 64KB Flash, 4K RAM, 512 EEPROM, 12b ADCC, 8b DAC, DMA, 16-bit PWM, PPS, UART, SPI/I2C

MIC5305YMLTR is a 6 pins integrated circuit by Microchip. Key specs: 6 pins, Small Outline No-lead package, IC REG LINEAR POS ADJ 150MA 6MLF. From quote-based sourcing, in stock checks support worldwide shipping.

PIC24FJ128GL306T-I/MR is a 16-bit PIC24 microcontroller from Microchip running at up to 48 MHz, featuring 128 KB ECC Flash, 8 KB RAM, integrated LCD controller, 17-channel 10-bit ADC, and XLP ultra-low-power mode in a 64-pin QFN package. From $3.85, in stock, worldwide shipping.

PIC24FJ128GL306-E/MR is a 16-bit PIC24 microcontroller from Microchip operating at up to 48 MHz with 128 KB ECC Flash, 8 KB RAM, integrated LCD controller, and 17-channel 10-bit ADC in a 64-pin QFN package. It supports XLP (eXtreme Low Power) technology for battery-powered applications with extended temperature range. Available from global distributors with worldwide shipping.

PIC24FJ64GL302-E/SS is a 16-bit PIC24 microcontroller running at up to 48MHz with 64KB ECC Flash, 8KB RAM, integrated LCD driver, and a 9-channel 10-bit ADC, housed in a 28-pin SSOP package for industrial and consumer applications.

MCP3562RT-E/ST is a 24-bit delta-sigma ADC with integrated voltage reference from Microchip, offering 4 analog input channels, 0.0032% maximum linearity error, and a TSSOP-20 package. It enables high-resolution data acquisition for industrial and scientific measurement systems. Available in stock with worldwide shipping.

IC MCU 8BIT 256KB FLASH 100TQFP

Microchip PIC32MK0256MCJ048-I/Y8X is a 32-bit MIPS MCU with 256KB Flash, CAN-FD, and dedicated motor control peripherals running up to 64 MHz. Operates from a 3V to 3.6V supply with 12-bit ADC, PWM, and boundary scan in a compact 48-pin TQFP package. Ideal for cost-sensitive motor drive and CAN-FD automotive or industrial nodes.

Microchip SST26VF040AT-104I/MF is a 4 Mbit SPI and Quad I/O NOR flash memory rated at 104 MHz clock frequency with 100,000 write/erase cycle endurance and 100-year data retention. Housed in a compact 8-pad WSON (WDFN) package, it suits code storage and XIP execution in low-power embedded systems.

The UPD350DT/Q8X is a highly integrated USB Type-C Power Delivery 3.0 port controller with SPI interface, running at up to 48 MHz and drawing only 15 mA supply current in a compact 28-pin QFN package. It supports I2C, SPI, and USB bus interfaces for flexible host integration in consumer and industrial designs. Available from Microchip authorized distributors with worldwide shipping.

Microchip 47L64-I/SN is a 64 Kbit (8 K × 8-bit) combination EEPROM and SRAM memory device with 550 ns maximum access time in an 8-pin SOIC package. Available with worldwide shipping.

8-bit Microcontrollers - MCU CAN-FD, 128KB Flash, 13KB RAM, 12b ADC3, UTMR, DAC, Comp, PWM, CCP, CWG, HLT, WWDT, SCAN/CRC, ZCD, PPS,Comms IDLE/DOZE/PMD, JTAG

The MCP25025-I/SL is a Microchip 8-bit CAN bus I/O expander in a 14-pin SOIC package. It communicates via SPI and provides 8 general-purpose I/O pins with interrupt capability, extending microcontroller I/O over a CAN network for industrial and automotive control applications.

The MCP16501TA-E/RMB is a 4-channel integrated power management IC (PMIC) with adjustable thresholds in a 24-pin VQFN package, designed to simplify multi-rail power supply design for microcontrollers and embedded systems.

8-bit Microcontrollers - MCU 16KB Flash, 1K RAM, 512 EEPROM, 12b ADCC, 8b DAC, DMA, 16-bit PWM, PPS, UART, SPI/I2C

8-bit Microcontrollers - MCU 16KB Flash, 1K RAM, 512 EEPROM, 12b ADCC, 8b DAC, DMA, 16-bit PWM, PPS, UART, SPI/I2C

8-bit Microcontrollers - MCU 16KB Flash, 1K RAM, 512 EEPROM, 12b ADCC, 8b DAC, DMA, 16-bit PWM, PPS, UART, SPI/I2C

8-bit Microcontrollers - MCU 32KB Flash, 2K RAM, 512 EEPROM, 12b ADCC, 8b DAC, DMA, 16-bit PWM, PPS, UART, SPI/I2C

The PIC24FJ512GU410-I/PT is a 16-bit PIC24 microcontroller from Microchip with 512KB ECC Flash, 32KB RAM, and USB and LCD interfaces in a 100-pin TQFP package. It operates at up to 48MHz delivering 16 MIPS performance with a 24-channel 10-bit ADC. Introduced in 2020 with an 18-year lifetime for long-term industrial designs.

PIC18F16Q41-I/REB is an 8-bit PIC18 microcontroller with 64 KB Flash and a 64 MHz maximum clock. It integrates ADC, DAC channels, and multiple communication peripherals in a compact 20-VQFN package. Well-suited for embedded control, sensor interfacing, and IoT edge nodes requiring low-power 8-bit processing.

AVR64DA28-E/SS is a Microchip 8-bit AVR microcontroller with 64KB Flash memory and up to 24 MHz clock speed in a 28-pin SSOP package. It integrates ADC, DAC channels, and advanced analog peripherals for real-time control. Suitable for industrial sensors, consumer appliances, and embedded control applications requiring a capable, cost-effective 8-bit MCU.

8-bit Microcontrollers - MCU 64KB Flash, 4K RAM, 512 EEPROM, 12b ADCC, 8b DAC, DMA, 16-bit PWM, PPS, UART, SPI/I2C

8-bit Microcontrollers - MCU Op Amp, 64KB Flash, 4K RAM, 512 EEPROM, 12b ADCC, 8b DAC, DMA, 16-bit PWM, PPS, UART, SPI/I2C

The PIC24FJ512GU410-E/PT is a 16-bit microcontroller with 512 KB Flash, up to 48 MHz clock, USB full-speed OTG, and a 24-channel 10-bit ADC in a 100-pin TQFP package. It targets USB-connected consumer and industrial embedded systems requiring rich connectivity and analog capability.

The PIC32MK0256GPG064-I/PT is a 32-bit PIC32MK microcontroller from Microchip featuring 256KB Flash, 64KB RAM, running at up to 64 MHz in a 64-pin TQFP package. It operates on 3.0 V to 3.6 V supply with integrated ADC, boundary scan, and rich peripherals for general-purpose embedded control applications.