Integrated Circuit

Programmable Bluetooth® Low Energy wireless SoC

Automotive 8-bit MCU, with up to 8-Kbyte Flash memory, data EEPROM, 10-bit ADC, timers, LIN, SPI, I²C, 3 to 5.5 V

Proximity Sensors Time-of-Flight 8x8 multizone ranging sensor with wide field of view

Mainstream Arm Cortex-M0+ MCU with 64 Kbytes of Flash memory, 8 Kbytes RAM, 64 MHz CPU, 2x USART, timers, ADC, comm. I/F, 1.7-3.6V

Ultra-low-power 32-bit MCU Arm®-based Cortex®-M0+, up to 192KB Flash, 20KB SRAM, 6KB EEPROM, USB, ADC, DACs

Tiny, low power, 16 V single operational amplifier for cost-optimized systems

Core: ARM-32-bit-Cortex-M4 CPU with FPU (72 MHz max), single-cycle multiplication and HW division, and DSP instruction  Memories – Up to 64 KB of Flash memory – 12 KB of SRAM with HW parity check – Routine booster: 4 KB of SRAM on instruction and data bus with HW parity check (CCM)

Use the download button to access the NUCLEO-WL55JC2 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.

LQFP-100

M24C08-RDW6TG is an 8 Kbit (1 KB) serial I2C EEPROM from STMicroelectronics operating from 1.8 V to 5.5 V with a 400 kHz fast-mode interface in an 8-pin TSSOP package. It endures up to 1 million write/erase cycles with 40-year data retention. Available from stock with worldwide shipping.

The L4993MD is an automotive-grade low-dropout voltage regulator with integrated watchdog from STMicroelectronics. It accepts inputs from 6 V to 31 V with a nominal 200 mV dropout and a maximum 40 V absolute rating, meeting automotive transient requirements. Packaged in 20-pin SO, it targets ECU power supply and microcontroller reset supervision.

Automotive Low Drop Voltage Regulator With Watchdog

• Industry standard MICROWIRE™ bus • Single supply voltage: – 2.5 V to 5.5 V for M93Cx6-W – 1.8 V to 5.5 V for M93Cx6-R • Dual organization: by word (x16) or byte (x8) • Programming instructions that work on: byte, word or entire memory • Self-timed programming cycle with auto-erase: 5 ms • READY/BUSY signal during programming • 2 MHz clock rate • Sequential read operation • Enhanced ESD/latch-up behavior • More than 4 million write cycles • More than 200-year data retention Package • ECOPACK2

Use the download button to access the STM32WLE4JCI6 schematic symbol, PCB footprint, and 3D model.

60 V, 300 mA synchronous step-down switching regulator with 10 μA quiescent current

Arm® Cortex®-M7 32-bit 550 MHz MCU, 1 MB flash, 564 KB RAM, Ethernet, USB, 3x FD-CAN, Graphics, 2x 16-bit ADCs, crypto/hash

14-stage binary counter/oscillator

Use the download button to access the STM32WL55JCI6 schematic symbol, PCB footprint, and 3D model.

Multiprotocol LPWAN dual core 32-bit Arm® Cortex®-M4/M0+ LoRa®, (G)FSK, (G)MSK, BPSK, up to 256KB flash, 64KB SRAM

STMicroelectronics VN920SP-E, High Side Power Switch 10-Pin, PowerSO

The UC3842TN is a current-mode PWM controller IC for flyback, forward, and boost switch-mode power supplies from STMicroelectronics. It operates from 12 V to 30 V supply, supports up to 500 kHz switching frequency, and delivers 1 A peak gate drive current. Packaged in an 8-pin PDIP for through-hole SMPS designs.

Dual mode low power 150 mW stereo headphone amplifier with capacitor-less and single-ended outputs

Automotive 8-bit MCU, with up to 128 Kbyte Flash, data EEPROM, 10-bit ADC, timers, LIN, CAN, USART, SPI, I2C, 3 to 5.5 V

Ultra-low-power with FPU Arm Cortex-M4 MCU 120 MHz with 1024 kbytes of Flash memory, USB OTG, DFSDM, CHROM-ART, AES, PKA

Ultra-low-power Arm® Cortex®-M4 32-bit MCU+FPU, 100DMIPS, up to 128KB flash, 40KB SRAM, analog, ext. SMPS

ARM® Cortex®-M0+ STM32G0 Microcontroller IC 32-Bit Single-Core 64MHz 64KB (64K x 8) FLASH 32-LQFP (7x7)

Mainstream Arm Cortex-M4+ MCU 170 MHz with 32 Kbytes of Flash memory, Math Accelerator, Medium Analog level integration

Use the download button to access the STM32L4Q5CGT6P schematic symbol, PCB footprint, and 3D model.

Sensor Interface Dual channel transceiver IC for SIO and IO-Link sensor applications

RF IC Fractional- N Divider 0Hz ~ 7GHz Frequency Sweeper 32-QFN (5x5)

LDO Voltage Regulators Ultra Low Noise, High PSRR #Negative LDO

LTC1261LCMS8-4.5#PBF is a switched-capacitor voltage inverter IC from Analog Devices, generating a fixed -4.5V output from a 5V input rail. It operates with an input voltage range of 4.75V to 5.25V and comes in a compact MSOP-8 package, ideal for space-constrained designs.

The LT1999MPMS8-10#TRPBF is a high-voltage bidirectional current sense amplifier from Analog Devices with a fixed gain of 10, 120 dB CMRR, and a wide common-mode input range, packaged in an 8-pin MSOP for precision power monitoring in automotive and industrial applications.

Analog Devices LTC6655BHMS8-5#TRPBF is an ultra-low noise, 5 V precision voltage reference in an 8-pin MSOP package, with output accuracy of 4.9987 V to 5.0012 V. It delivers sub-2 µVpp noise from 0.1 Hz to 10 Hz and excellent long-term stability for high-precision ADC and DAC applications. Ideal for precision instrumentation, data acquisition systems, and calibration equipment demanding tight reference accuracy.

The LTC1992-10IMS8#TRPBF is a fully differential amplifier from Analog Devices with rail-to-rail output, ±5.5 V supply range, 60 dB CMRR, and automotive-grade qualification in an 8-pin MSOP package, suited for precision signal conditioning in harsh environments.

LT3463EDD#TRPBF is a dual micropower DC/DC converter from Analog Devices featuring integrated Schottky diodes for boost and inverting configurations. It accepts input voltages from 2.4 V to 15 V and uses constant off-time voltage-mode control. Available in a compact 10-pin DFN package for space-constrained designs.

Differential Amplifiers Low Noise SAR ADC Driver?Single-Ended to Differential Converter

LTC2162IUK#PBF is a 16-bit, 65 MSPS low-power ADC from Analog Devices operating from a 1.8 V supply with parallel output interface and a maximum linearity error of only 0.0092%. It accepts a differential analog input from -2 V to 2 V in a 48-pin QFN package for high-speed signal digitization. Available from stock with worldwide shipping.

Switching Voltage Regulators 58VIN, 6A CVCC Buck Module Reg

LT6350CDD#PBF is a low-noise differential amplifier and SAR ADC driver from Analog Devices in a small outline no-lead package, converting single-ended inputs to differential outputs with minimal noise for high-resolution 12-bit to 18-bit ADC interface applications.

The LT1814CS#PBF is a quad 100 MHz voltage-feedback operational amplifier from Analog Devices offering 3.6 mA supply current per amplifier. Featuring 85 dB common-mode rejection ratio and 5 µA maximum bias current, it suits precision high-speed signal processing.

DAC 4-CH Resistor-String 12-bit 16-Pin TSSOP T/R

LT3958IUHE#PBF is a high input voltage current-mode switching regulator IC from Analog Devices supporting boost, flyback, SEPIC, and inverting topologies. It operates from 5 V to 80 V input with a programmable switching frequency of 100 kHz to 1 MHz. Ideal for industrial power supplies, automotive systems, and wide-input-range DC-DC conversion applications.

RF Amplifier lo Noise amp SMT, 14 - 27 GHz

LTC2851IMS8#TRPBF is a 3.3 V full-duplex RS-485/RS-422 transceiver by Analog Devices supporting data rates up to 20 Mbps with differential Schmitt-trigger receiver inputs for high noise immunity. Housed in an 8-pin MSOP package, it is rated for industrial -40°C to +85°C operation and drives bus networks with up to 32 unit loads. Available from stock with worldwide shipping.

Digital to Analog Converters - DAC 16-bit 12GSPS RF DAC w/3GSPS Channel

Linear Battery Charger Li-Ion/Li-Pol 800mA 4.2V 5-Pin TSOT-23 T/R

ANALOG DEVICES - HMC618ALP3ETR - RF AMP, 19DB, 1.2-2.2GHZ, 5V, QFN-16

Digital to Analog Converters - DAC 2x 16-B R2R DACs in 8-Lead MS

Battery Management ULP Boost CHG SIDO & FCHG LLD 300mA