Integrated Circuit

Analog Devices LT1781ISW#PBF is a low-power RS-232 line transceiver IC in a 16-pin SOIC package. It integrates 2 drivers and 2 receivers with 15 kV ESD protection on RS-232 I/O pins, operating from a single 5 V supply. Designed for space-constrained serial communication interfaces in industrial, embedded, and portable computing equipment.

MAX5980AGTJ+ is a 4-channel power-device controller IC from Analog Devices (Maxim) with 60 V input rating and 400 kHz switching frequency in a compact TQFN-32 package. Designed for multi-channel DC-DC converter control in network and telecom power systems. Supports synchronous rectification and robust power management in high-density designs. Available from stock with worldwide shipping.

MAXIM INTEGRATED PRODUCTS - MAX14713EWL+ - Power Path Selector, 1.6V to 5.5V, WLP-15

Analog Devices LTC1966MPMS8 is a delta-sigma RMS-to-DC converter with 1.05 V maximum input, 170 µA supply current, and 800 kHz bandwidth in an 8-pin MSOP package. It delivers accurate true-RMS measurement of AC signals without precision resistors or trims. Ideal for power meters, multimeters, AC sensor interfaces, and telecommunications equipment requiring high-accuracy RMS conversion of broadband signals.

Analog Devices LT3015IDD-5#PBF is a 1.5 A low-noise negative linear regulator with a fixed -5 V output and precision current limit. It accepts input voltages from -5.5 V to -30 V, features a 0.31 V typical dropout voltage, and is housed in a compact 8-pin DFN package.

Improved Precision Micropower Shunt Voltage Reference with Multiple Reverse Breakdown Voltages

Switching Voltage Regulators [Tin-Lead SnPb BGA] 36VIN, 8.5A Buck-Boost uModule Regulator

The Analog Devices LTC3642EMS8E-5#TRPBF is an automotive-grade synchronous step-down (buck) DC-DC converter with a wide 4.5V to 45V input range and fixed 5V output at up to 50mA, featuring burst-mode current control for ultra-low quiescent current. Housed in an 8-pin MSOP with exposed pad, it delivers high efficiency across a broad input voltage range. Suitable for automotive always-on power rails, industrial 24V/48V bus-powered microcontroller supplies, and harsh-environment sensor nodes.

Conv DC-DC 4.5V to 45V Synchronous Step Down Single-Out 5V 0.05A Automotive 8-Pin MSOP EP T/R

Supervisory Circuits Single uPower Reset Circuit

LTC3642IMS8E-3.3#PBF is an automotive-grade synchronous buck DC-DC converter accepting 4.5 V to 45 V input and delivering a fixed 3.3 V output at up to 50 mA. It uses current-mode burst-mode control for high efficiency at light loads in an 8-pin MSOP package. In stock with worldwide shipping.

Switching Voltage Regulators [Tin-Lead SnPb BGA] 36Vin, 5A 2-Quadrant CVCC Step-Down uModule Regulator

LDO Regulator Pos 3.8V to 30V 0.7A 8-Pin SOIC N Tube

Analog Devices LTC3124EFE#PBF is a 15 V, 5 A two-phase synchronous step-up DC/DC converter with output disconnect, accepting input voltages from 0.5 V to 5.5 V and delivering regulated output from 2.5 V to 15 V. Current-mode PWM control and dual-phase architecture minimize input and output ripple for demanding portable power applications. Available worldwide in TSSOP-16 package for battery-powered and IoT power management designs.

1A High Voltage, Efficiency Switching Voltage Regulator

LTC6102HMS8-1 is a high-side current sense amplifier from Analog Devices rated for 60 V automotive applications in an 8-pin MSOP package, with 50 µV maximum input offset voltage and 20 nA maximum bias current. It provides precision current monitoring on high-voltage rails. From $4.90, in stock with worldwide shipping.

Voltage References Ultra Low Noise, 1.25V Precision Voltage Reference

Power Switch ICs - POE / LAN IEEE802.3 af High Efficiency Powered Device with dc/dc converter

Analog Devices LT3061EMS8E-3.3#PBF is a 45 V input, 100 mA micropower low-dropout linear regulator with a fixed 3.3 V output and integrated output discharge. It features a typical dropout voltage of just 250 mV and ultra-low quiescent current for noise-sensitive applications. Available from authorized distributors worldwide with in-stock inventory and competitive pricing.

Supervisory Circuits uP Precision Triple Supply Monitor

Analog Devices LTC2368CMS-16#PBF is a 16-bit single-channel SAR ADC achieving 1 Msps throughput rate with a maximum conversion time of 0.527 µs and analog input up to 5.1 V in a 16-pin MSOP package. Its 0.0011% linearity error delivers precision measurement for demanding signal chains. Available in tube packaging from authorized distributors worldwide.

Supervisory Circuits uP Precision Triple Supply Monitor

The LTC4444IMS8E-5#TRPBF is an automotive-grade dual-output high- and low-side MOSFET gate driver from Analog Devices, delivering up to 1.75 A peak drive current per channel with Schmitt-trigger inputs, housed in an 8-pin MSOP package.

Analog Devices LT3845AIFE#TRPBF is a high-voltage synchronous current-mode step-down controller operating from 4 V to 60 V input with adjustable switching frequency and burst mode. It drives external N-channel MOSFETs for efficient DC-DC conversion in demanding power supply designs.

Switching Voltage Regulators High-Efficiency Buck-Boost Regulator

Switching Voltage Regulators 60V, 4A Synchronous Step-Down Regulator with Rail-to-Rail Programmable Output

The LTC4444EMS8E#PBF is an automotive-grade dual-output high- and low-side MOSFET gate driver from Analog Devices, providing up to 3 A peak drive current with Schmitt-trigger inputs, supplied in an 8-pin MSOP EP tube for automotive half-bridge applications.

LT3845AIFE#PBF is a high-voltage synchronous current-mode step-down controller supporting 4 V to 60 V input. Features adjustable operating frequency, burst mode for light-load efficiency, and drives external N-channel MOSFETs. Designed for telecom, industrial, and automotive DC-DC conversion applications.

LTC2876IMS8E#TRPBF is a 60 V fault-protected RS-485/PROFIBUS transceiver from Analog Devices in an 8-pin MSOP package. It supports half-duplex EIA-485 and EIA-422 communication with differential Schmitt-trigger inputs and operates from a 3.3 V or 5 V supply. Suitable for industrial fieldbus networks requiring robust over-voltage protection and high noise immunity.

Analog Devices LTC4444EMS8E-5#PBF is a 1.75 A dual-output high-side and low-side MOSFET gate driver in an 8-pin MSOP with exposed pad, supporting 5 V bootstrap operation and AEC-Q100 automotive qualification for half-bridge and motor drive designs. Available in stock worldwide with fast shipping.

Bidirectional Current Sense Amplifier with PWM-Rejection

ESD-Protected X, Y, Z and X_, Y_, Z_ Pins • ±15kV (Human Body Model) • ±12kV (IEC 1000-4-2, Air-Gap Discharge) • ±8kV (IEC 1000-4-2, Contact Discharge) ● Pin-Compatible with Industry-Standard • 74HC4051/74HC4052/74HC4053 ● Guaranteed On-Resistance • 220Ω with Single +5V Supply • 160Ω with ±5V Supply ● RON Match Between Channels: 2Ω (typ) ● Guaranteed Low leakage Currents ● 1nA Off-Leakage (at +25°C) ● 1nA On-Leakage (at +25°C) • TTL-Compatible Inputs with +5V/±5V Supplies • Low Distortion: < 0

Operational Amplifiers - Op Amps SOT23, Micropower, Single-Supply, Rail-to-Rail I/O Op Amps

MAXIM INTEGRATED PRODUCTS - MAX6425UK29+T - MPU SUPERVISOR, 5.5V, SOT-23-5 U5+2

The LTC2879XMS8E#TRPBF is an EIA-485/EIA-422 compliant differential line transceiver IC in an 8-pin MSOP package for robust industrial serial communication. It features a differential Schmitt trigger receiver and supports half-duplex RS-485 bus topologies with a single driver and receiver function. Available on tape and reel with worldwide shipping.

METAL CAN, TO-46, 4 PIN

Analog Devices LT3045IMSE#PBF is a high-performance adjustable linear LDO voltage regulator delivering up to 500 mA output current with an ultralow noise floor and ultrahigh PSRR, rated for input voltages up to 20 V and a typical dropout voltage of 0.22 V. Packaged in a compact 12-lead MSOP, it achieves 0.0033% maximum load regulation. Globally stocked for RF, precision analog, and noise-sensitive power supply applications in communications and instrumentation.

Analog Devices LTC7800HUDC#PBF is a high-frequency synchronous buck controller operating from 4V to 60V input and supporting switching frequencies up to 2 MHz. It uses current-mode PWM control with fast transient response and is housed in a 20-lead QFN package for compact, thermally efficient power stage designs.

Power Switch ICs - POE / LAN IEEE802.3 af High Efficiency Powered Device with dc/dc converter

Supervisory Circuits Basic Push Button On/Off Controller (Adjustable Off and Kill Timers)

Switching Voltage Regulators IEEE802.3 af High Efficiency Powered Device with dc/dc converter

LT6023IMS8#PBF is a dual micropower precision op-amp from Analog Devices with only 20 µA supply current per amplifier and 1 V/µs slew rate in an 8-pin MSOP package. It provides 125 dB CMRR and 175 µV maximum input offset voltage for precision signal conditioning in power-constrained designs. Available from stock with worldwide shipping.

RS-422/RS-485 Interface IC 60V Fault Tolerant RS485/RS422 Transceiver with Operation to 175C

Current & Power Monitors & Regulators >> MAX17612A: 4.5V to 60V, 200mA Overvoltage, Overcurrent Protector with Reverse Protection and UVLO/OV

The LT6023IMS8#TRPBF is a dual micropower precision operational amplifier from Analog Devices in an 8-pin MSOP package, drawing only 20 µA supply current per amplifier. It achieves a 175 µV maximum input offset voltage, 125 dB CMRR, 3 pA maximum bias current, and a 1 V/µs slew rate for demanding low-power precision applications. Available from authorized distributors in tape-and-reel packaging with worldwide shipping.

Analog Comparators Quad Comparator / Reference

Analog Devices LT8315IFE#PBF is a 560 V input micropower no-opto isolated flyback converter IC with an integrated 630 V, 300 mA switch in a 16-pin SOIC package, enabling optocoupler-free isolated power designs from 9.5 V to 40 V input.

The Analog Devices LT6023HMS8#PBF is a dual precision automotive op-amp with rail-to-rail output, ±15 V / 30 V supply, 125 dB CMRR, and 175 µV maximum input offset voltage in an 8-pin MSOP package. Suited for instrumentation and signal conditioning in automotive systems. Available in stock with worldwide shipping.

LDO Regulator Pos 3.8V to 20V 0.3A 8-Pin MSOP

IC RESET MPU LOW PWR SOT143-4