Integrated Circuit

Analog Devices MAX40009ANT+ is a micropower single voltage comparator with push-pull output and 0.14 µA maximum bias current in a tiny 6-ball WLP package. It suits space-critical and energy-sensitive applications requiring threshold detection. Available in lead-free wafer-level packaging for compact wearable and IoT designs worldwide.

Analog Devices LTC1326IMS8#PBF is a precision triple supply monitor IC with 3 voltage supervisor channels, 4.725 V reset threshold, and a manual push-button reset input in an 8-pin MSOP package. Ideal for multi-rail embedded systems. Available worldwide with fast shipping.

The Analog Devices LT3061EMS8E-5#PBF is a 45 V input, 100 mA micropower low-dropout linear regulator fixed at 5 V output with ultra-low noise and an active output discharge feature. It achieves a 0.25 V typical dropout voltage at 100 mA and operates from 5.6 V to 45 V input for high-voltage industrial rails. Available in MSOP-8 package with worldwide stock and competitive pricing.

LTC5509ESC6#TRMPBF is an Analog Devices RF power detector covering 300 MHz to 3 GHz, housed in a compact 6-pin SOT23 package. It delivers accurate power detection across a wide dynamic range for wireless communications and test equipment designs.

Analog Devices LTC1326IMS8-2.5#PBF is a precision triple supply monitor with a 2.363V reset threshold and manual push-button reset input, supervising 3 channels in an 8-pin SOIC package. Available from stock with worldwide shipping.

The LTC5509ESC6#TRPBF is a wideband RF power detector from Analog Devices covering 300 MHz to 3000 MHz with a 6 dBm input range in a compact SC-70 6-pin package. It delivers accurate received signal strength indication (RSSI) output for wireless systems. Available from stock worldwide with fast shipping.

Analog Devices LT1463CS#PBF is a quad JFET-input operational amplifier with ultra-low 0.00075 µA average bias current, 40 µA per amplifier supply current, and 72 dB minimum CMRR in a 14-pin SOIC package. Pico-amp input bias current suits precision signal conditioning and high-impedance sensor interfaces. Available from stock with worldwide shipping.

Power Management Specialized - PMIC USB Charger Detection IC

Supervisory Circuits uP Precision Triple Supply Monitor

Digital Isolators 5kV 2-Ch Isolator w/ Int DC/DC Converter

Improved Precision Micropower Shunt Voltage Reference with Multiple Reverse Breakdown Voltages

Multiplexer Switch ICs 16-Channel Dual 8 Channel, Low Leakage, CMOS Analog Multiplexers

High Speed Operational Amplifiers QUAD 180HMZ R-TO-R V-FDBK

Accelerometers Low Noise 50kHz +100g 1-axis accel

LDO Voltage Regulators 150mA LDO 2.8Vout

RF MODULATOR, 44 Pin, Plastic, PLCC

Analog Devices LTC4162EUFD-SAD#PBF is a 35 V, 3.2 A multi-cell Li-Ion step-down battery charger with PowerPath management and I2C telemetry, housed in a 28-pin QFN package.

The Analog Devices LT3485EDD-0#TRPBF is a photoflash capacitor charger IC with integrated IGBT gate drive, output voltage monitoring, and a 10-lead thin MSOP package with exposed heat-sink slug. It delivers high-efficiency boost conversion from a single-cell lithium or AA battery to the 300 V+ charge voltages required by xenon flash lamps in digital cameras and portable imaging systems.

LDO Voltage Regulators Ultralow Quiescent Crnt 150mA CMOS

LDO Voltage Regulators 150mA LDO 2.7Vout

Supervisory Circuits 4-Pin SC70 Microprocessor Reset Circuits with Manual Reset Input

MAXIM INTEGRATED PRODUCTS - MAX397CAI+ - Analog Multiplexer/Demultiplexer, 8:1, 2 Circuits, 100 ohm, 2.7V to 16V, ± 2.7V to ± 8V, SSOP-28

Analog Switch ICs Serially Controlled, Low-Voltage, 8-Channel SPST Switch

Battery Management Single-Cell NiMH Charger

Operational Amplifiers - Op Amps UCSP, Single-Supply, Low-Noise, Low-Distortion, Rail-to-Rail Op Amps

Analog Devices LT3663IMS8E-3.3#PBF is a fixed 3.3 V output, 1.2 A step-down DC-DC converter accepting 7.5 V to 36 V input, housed in an 8-pin MSOP EP package with automotive qualification. It uses constant-frequency current-mode control for stable, low-noise regulation suitable for 12 V and 24 V automotive rails. Available in tube packaging from global authorized distributors for prototype and production builds.

Analog Devices LTC2662IUH-16#TRPBF is a 5-channel 16-bit current-source DAC with serial binary input and a -5 V to +5 V output voltage range, housed in a 32-pin QFN package for precision multi-channel analog output systems.

Board Mount Temperature Sensors A +/- 1A C Fail-Safe Remote/Local Temperature Sensors with SMBus Interface

Analog Devices LTC2662HUH-16#PBF is a 5-channel 16-bit/12-bit precision current-source DAC with a serial SPI binary interface and ±5 V analog output range in a 32-pin QFN package. Each channel independently sources or sinks programmable current for multichannel process control and instrumentation. Available in global stock with worldwide shipping for demanding analog output applications.

MAXIM INTEGRATED PRODUCTS - MAX4253EUB+ - Operational Amplifier, 2 Amplifier, 3 MHz, 0.3 V/µs, ± 1.2V to ± 2.75V, 2.4V to 5.5V, µMAX, 10 Pins

Analog Devices LT3579EUFD#PBF is a 6 A boost and inverting DC/DC converter IC with integrated fault protection, operating from 2.5 V to 16 V input. Uses current-mode PWM control for fast transient response in a compact 20-lead QFN package. Available from authorized distributors with worldwide shipping.

Hot Swap Controller 1-CH 15V N-Channel Positive Low Voltage 24-Pin QFN EP Tube

LDO Voltage Regulators Ultra-Low Noise 200mA LDO

LDO Voltage Regulators 200mA L/N Negative LDO in Thin SOT

LDO Voltage Regulators 200mA LDO 3.3Vout

MAXIM INTEGRATED PRODUCTS - MAX4617EUE+T - ANALOGUE MUX/DEMUX, 8:1, -40 TO 85DEG C

Digital to Analog Converters - DAC 5V, Low-Power, Parallel-Input, Voltage-Output, 10-Bit DAC

2.5V–5.0V, 0.5A/2.5A Reversible Buck/Boost Regulator for Backup Power Applications

LDO Voltage Regulators 200mA LDO 25Vout

Analog Devices LTC2876CMS8E#TRPBF is a 60 V fault-protected RS-485/RS-422 and PROFIBUS line transceiver IC in an 8-lead MSOP package. It operates from 3 V or 5 V supply with differential Schmitt trigger inputs for robust noise immunity. Available from stock worldwide with fast shipping.

LDO Voltage Regulators Ultra-Low Noise 200mA LDO

MAXIM INTEGRATED PRODUCTS - MAX708RCUA+ - Supervisory/Monitor, Active-High/Low, Push-Pull Reset, 1V to 5.5V Supply, 2.63V Threshold, µMAX-8

Analog Devices MAX40056FAWA+ is a bidirectional current sense amplifier with PWM-rejection using chopper-stabilized architecture. It offers 140dB nominal CMRR and 300µV maximum input offset voltage for precision measurement. Packaged in an 8-pin WLCSP BGA, it targets motor drive and power conversion applications.

Phase Locked Loops - PLL Clock Generation PLL

Analog Devices LT3032MPDE-12#PBF is a dual 200 mA positive/negative low-noise LDO linear regulator with 0.27 V maximum dropout and 2.3 V to 20 V input range, available in a DFN package for precision analog applications.

The LTC2876CMS8E#PBF is a 60V fault-protected RS-485/RS-422 transceiver IC in an MSOP-8 package, featuring differential Schmitt trigger inputs and support for up to 256 nodes. Priced competitively, it is in stock with worldwide shipping available.

LT3483ES6#TRPBF is a 200 mA, 40 V inverting DC/DC converter from Analog Devices using constant off-time (COT) current-mode control, operating from 2.5 V to 16 V input in a compact SOT-23-6 package. It generates negative output voltages from a positive supply with no external sense resistor needed.

The LT3472EDD#PBF is a dual-output DC-DC converter from Analog Devices that generates both a positive output from 1.25V to 34V and a negative output down to -34V from a 2.2V to 16V input, making it ideal for automotive and industrial designs. It uses current-mode PWM control in a compact 10-pin DFN package with an exposed pad for enhanced thermal performance.

Current Sense Amplifiers Current Sense Amplifier

Analog Devices LTC2876IMS8E#PBF is a 60 V fault-protected RS-485/PROFIBUS transceiver IC compliant with EIA-422 and EIA-485 standards, featuring differential Schmitt trigger inputs for robust noise immunity. It supports 3 V supply operation and integrates a single-bit driver in an 8-pin MSOP small outline package. Available with worldwide shipping for industrial field-bus designs.