Integrated Circuit

Multi-purpose NFC transceiver

ST25R3917-AQET is a high-performance NFC universal device and EMVCo reader IC from STMicroelectronics operating at 2.6 V to 5.5 V, supporting ISO 15693, ISO 14443, and NFC standards in a compact 32-pin QFN package.

STMicroelectronics ST25DV16KC-IE8C3 is a dynamic NFC/RFID tag IC with 16 Kbit EEPROM, fast transfer mode, and an I2C host interface for dual-interface data exchange. Supports ISO 15693 at 13.56 MHz with energy harvesting and configurable memory protection in a compact package. Available from stock with worldwide shipping for IoT and smart label applications.

STMicroelectronics STM32L451RCI6TR is an ultra-low-power 32-bit ARM Cortex-M4 microcontroller with FPU, running at up to 80 MHz and delivering 100 DMIPS from 512KB Flash and 160KB SRAM. It integrates ADC, DAC, DMA, and audio interfaces in a 64-pin BGA package. Available from stock with worldwide shipping.

STMicroelectronics ST25R3918-AQFT is a multi-purpose NFC transceiver supporting ISO 14443 A/B, ISO 15693, and NFC Forum modes at 13.56 MHz. It features an integrated power amplifier, receiver, and antenna driver in a compact QFN package. Available from global distributors with worldwide shipping.

8 multiplexed channels, 50 ksps to 200 ksps, 12-bit SAR ADC

Propagation delay: 8 ns • Low current consumption: 470 μA typ. at 5 V • Rail-to-rail inputs • Push-pull outputs • Supply operation from 2.2 to 5 V • Wide temperature range: -40 °C to 125 °C • ESD tolerance: 2 kV HBM/200 V MM • Available in SOT23-5, SC70-5 and DFN8 2x2 wettable flanks • Automotive qualification

STMicroelectronics ST25R3916-AQET is a high-performance NFC universal device and EMVCo reader IC supporting ISO 14443, ISO 15693, and NFC Forum standards. Operates from 2.6 V to 5.5 V supply with integrated RF front-end, receive demodulator, and SPI interface in a 32-pin QFN package. Available in stock worldwide with fast shipping.

Rail-to-rail inputs and outputs, 36 V, 6 MHz op amps

Dynamic NFC/RFID tag IC with 4-, 16-, or 64-Kbit EEPROM, fast transfer mode capability, and optimized I2C

Use the download button to access the STM32G431K8U6TR schematic symbol, PCB footprint, and 3D model.

32 channels LED driver with Automotive CAN FD Light interface

32-bit MCU family built on the Power Architecture® for automotive body electronics applications

The ST25DV16KC-IE6C3 is a 16-Kbit dynamic NFC/RFID tag IC from STMicroelectronics with dual I2C and RF interfaces, fast transfer mode, and a 12 V programming voltage for EEPROM configuration. It enables seamless bidirectional wireless data exchange between an NFC reader and a host microcontroller over I2C.

STMicroelectronics TSB511IYLT is a rail-to-rail input and output op-amp with 36 V supply, 6 MHz gain-bandwidth, 70 dB minimum CMRR, and 2 mV offset voltage in a compact SOT-23-5 package. From $0.65 in stock worldwide shipping.

Programmable Bluetooth® Low Energy wireless SoC

Mainstream Arm Cortex-M4 MCU 170 MHz with 128 Kbytes of Flash memory, Math Accelerator, Medium Analog level integration

The TSL6804 is a nanopower operational amplifier with rail-to-rail input and output, consuming only 600 nA quiescent current from a 5 V supply. It is optimized for cost-sensitive battery-powered sensor circuits requiring minimal power draw. Available in a small outline package from STMicroelectronics, in stock with worldwide shipping.

Arm® Cortex®-M4 32-bit MCU+FPU, 170 MHz / 213 DMIPS, up to 512 KB Flash, 112 KB SRAM, rich analog, math accelerator

High-performance and DSP with DP-FPU, Arm Cortex-M7 MCU with 2MBytes of Flash memory, 1376 KB SRAM, 280 MHz CPU, L1 cache, graphic accelerations, external memory interfaces and large set of peripherals

Programmable Bluetooth® Low Energy wireless SoC

Rad-hard plastic 8-channel, 1 Msps 12-bit ADC

STMicroelectronics LSM6DSO16IS is an integrated circuit for embedded control and industrial electronics designs. Key specs include 14 positions, PCB-mount based on the available part data. From $0 inquire online for sourced stock and worldwide shipping support.

Rad-hard plastic 2 A positive low drop voltage regulator

Rad-hard plastic octal bus buffer with 3-state outputs

The LEOAC244PT is a radiation-hardened octal bus buffer with 3-state outputs from STMicroelectronics in a 20-pin plastic SOP package. It provides unidirectional bus driving with active-low enable control, designed for space and high-reliability digital bus interface applications.

Rad-hard plastic quad 2-input NAND gate

SPSB081C5 is an automotive-grade power management IC from STMicroelectronics integrating LIN and CAN-FD transceivers, designed for body electronics and in-vehicle network nodes, housed in a compact QFN package.

LEOAC00PT is a integrated circuit component by STMicroelectronics. Key specs: 20 pins, Small Outline Packages, BOM-ready sourcing profile. From RFQ pricing, in stock with worldwide shipping.

Ultra-low-power Arm® Cortex®-M4 32-bit MCU+FPU, 100DMIPS, up to 128KB flash, 40KB SRAM, analog, ext. SMPS

Ultra-low-power Arm® Cortex®-M4 32-bit MCU+FPU, 100DMIPS, up to 128KB flash, 40KB SRAM, analog, ext. SMPS

SPSB0813 is an automotive power management IC from STMicroelectronics featuring LIN and CAN-FD interfaces in a compact QFN32L 5x5 mm package with 3.3 V output. Designed for body electronics and gateway modules in automotive systems.

STMicroelectronics TSL6802 is a nanopower rail-to-rail op amp drawing only 600 nA supply current, operating from 1.6 V to 5.5 V, suitable for battery-powered sensors and always-on IoT signal conditioning requiring minimal quiescent drain.

Automotive power management IC with LIN and CAN-FD

SPSB081C3 is an automotive power management IC from STMicroelectronics integrating LIN and CAN-FD transceivers, designed for vehicle body and chassis ECUs operating from 8 V to 36 V automotive battery supplies in a compact QFN package with worldwide shipping.

SPSB081C5-TR is an automotive-grade integrated power management unit with LIN and CAN-FD interfaces, 5 V output regulation, and a 32-pin 5x5 mm QFN package from STMicroelectronics. Available from stock with worldwide shipping.

High-performance and DSP with DP-FPU, Arm Cortex-M7 + Cortex-M4 MCU with 2MBytes of Flash memory, 1MB RAM, 480 MHz CPU, Art Accelerator, L1 cache, external memory interface, large set of peripherals, SMPS

High-performance and DSP with DP-FPU, Arm Cortex-M7 + Cortex-M4 MCU with 2MBytes of Flash memory, 1MB RAM, 480 MHz CPU, Art Accelerator, L1 cache, external memory interface, large set of peripherals, SMPS

19V Clamp - Ipp Tvs Diode Surface Mount 4-FlipChip (0.77x0.77)

Programmable transient voltage suppressor for SLIC protection

High power density 600V half-bridge driver with two enhancement mode GaN HEMTs

Mainstream Arm Cortex-M0+ 32-bit MCU, up to 512KB Flash, 144KB RAM, 6x USART, timers, ADC, DAC, comm. I/Fs, AES, RNG, 1.7-3.6V

Ultra-low-power Arm® Cortex®-M33 32-bit MCU+TrustZone®+FPU, 165 DMIPS, up to 512 KB Flash memory, 256 KB SRAM, SMPS

L99SM81VY is a integrated circuit component by STMicroelectronics. Key specs: 37 pins, Small Outline Packages, BOM-ready sourcing profile. From RFQ pricing, in stock with worldwide shipping.

STM32L412C8U6TR is an ultra-low-power 32-bit Arm Cortex-M4 MCU from STMicroelectronics with FPU, running at up to 80 MHz with 64 kB Flash and 40 kB SRAM. Features DMA, ADC, and external SMPS support in a QFN-48 package targeting IoT and wearable applications. Available from stock worldwide.

Ultra-low-power 32-bit ARM Cortex-M0+ MCU with 192 KB flash, 20 KB SRAM, 6 KB EEPROM, integrated ADC and DMA, running up to 32 MHz, housed in a 32-pin QFN. Designed for battery-operated IoT and sensor node applications requiring long field life. In stock worldwide.

STM32L152R8T6ATR is an ultra-low-power 32-bit ARM Cortex-M3 MCU with 128 KB Flash, 32 KB SRAM, 4 KB EEPROM, integrated LCD controller, USB, ADC, and DAC running at up to 32 MHz. It features JTAG boundary scan and DMA channels for efficient peripheral management. Available from STMicroelectronics in a LQFP package with worldwide shipping.

5.0 or 3.3 V TIMEKEEPER® supervisor

Mainstream Mixed signals MCUs Arm Cortex-M4 core with DSP and FPU, 64 Kbytes of Flash memory, 72 MHz CPU, 12-bit ADC 5 MSPS, Comparator, Op-Amp

MPU with Arm Dual Cortex-A7 800 MHz, Arm Cortex-M4 real-time coprocessor, TFT display, FD-CAN, Secure boot and Cryptography