Integrated Circuit

Automotive 8-bit MCU, with up to 8-Kbyte Flash memory, data EEPROM, 10-bit ADC, timers, LIN, SPI, I²C, 3 to 5.5 V

STMicroelectronics ACST610-8FPA is an overvoltage-protected AC switch integrating gate control, zero-crossing detection, and overcurrent protection in a vertical TO package, rated for up to 600 V and 10 A. Available from authorized distributors with worldwide shipping.

ACST1235-8FPA is an overvoltage-protected AC switch by STMicroelectronics rated for 12 A RMS and 800 V repetitive peak voltage. Key specs: isolated TO-220F vertical package, integrated overvoltage protection, suitable for 230 VAC mains loads. In stock with worldwide shipping.

TSSOP-20

High efficiency, high-side switch with extended diagnostics and smart driving for capacitive loads

High efficiency, high-side switch with extended diagnostics and smart driving for capacitive loads

High efficiency, high-side switch with extended diagnostics and smart driving for capacitive loads

STMicroelectronics ST25R3916B-BWLT is a high-performance NFC reader IC supporting ISO 14443, ISO 15693, and ISO 18092 protocols at up to 848 kbps, powered from 2.6 V to 5.5 V in a 36-ball chip-scale BGA package for payment, consumer, and industrial NFC applications.

Automotive 12 channels chip for advanced airbag applications

High efficiency, high-side switch with extended diagnostics, smart driving for capacitive loads and short propagation delay at power-on

38 V, 1.5 A synchronous step-down converter with 20 μA quiescent current

High efficiency, high-side switch with extended diagnostics and smart driving for capacitive loads

Automotive 8 channels chip for advanced airbag applications

STMicroelectronics STM32G0B1CBU7 is a 32-bit ARM Cortex-M0+ microcontroller at 48 MHz with 128KB Flash, 144KB RAM, 6x USART, ADC, DAC, DMA, and 1.7V–3.6V supply in a compact QFN package. Supports diverse connectivity for cost-optimized embedded designs. Available from stock with worldwide shipping.

Automotive 16 channels chip for advanced airbag applications

38 V, 1.5 A synchronous step-down converter with 20 μA quiescent current

STMicroelectronics VIPERGAN100TR is an advanced quasi-resonant offline high-voltage converter integrating an E-mode GaN HEMT, with 9V to 23V input range and current-mode resonant control in a 15-pin QFN package.

STMicroelectronics STM32U575CGU6TR is a 32-bit Arm Cortex-M33 ultra-low-power microcontroller with TrustZone security, FPU, 256 KB flash, and 786 KB SRAM in a compact QFN package. Achieves 240 DMIPS at 160 MHz with best-in-class power consumption for IoT and wearable applications. Available in tape and reel with worldwide distribution for high-volume production.

38 V, 1.5 A synchronous step-down converter with 20 μA quiescent current

38 V, 1.5 A synchronous step-down converter with 20 μA quiescent current

Advanced quasi-resonant offline converter integrating an E-mode GaN HEMT switch with current-mode resonant control for high-efficiency flyback power supplies. Accepts 9V to 23V bias input and delivers reduced switching losses in a 15-pin QFN package for compact adapter designs.

Ultra-low-power 32-bit Arm Cortex-M33 microcontroller with TrustZone security, FPU, and 240 DMIPS at up to 160 MHz. Integrates up to 2MB Flash, 786KB SRAM, and rich analog peripherals in a 132-pin BGA package for IoT and wearable applications.

Mainstream Arm Cortex-M0+ MCU with 128 Kbytes of Flash memory, 36 Kbytes RAM, 64 MHz CPU, 4x USART, timers, ADC, DAC, comm. I/F, AES256, 1.7-3.6V

2.4 GHz low pass filter matched to STM32WB0 series and BLUENRG-LP-LPS (BLUENRG-3x5Vx, BLUENRG-3x5Ax, BLUENRG-332xx) in QFN and CSP packages

Mainstream Arm Cortex-M0+ 32-bit MCU, up to 64 KB Flash, 18 KB RAM, 2x USART, timers, ADC, DAC, comm. I/Fs, 1.7-3.6V

STMicroelectronics STM32G0B1REI7N is a 32-bit Arm Cortex-M0+ microcontroller at 48 MHz with 512 KB Flash, 144 KB RAM, USB Type-C PD, and 6 USARTs in a compact BGA package running from 1.7 V to 3.6 V. Available from stock with worldwide shipping.

Mainstream Arm Cortex-M0+ 32-bit MCU, up to 64 KB Flash, 18 KB RAM, 2x USART, timers, ADC, DAC, comm. I/Fs, 1.7-3.6V

STNRG011A is a digital combo multi-mode PFC and time-shift LLC resonant controller in a 20-pin SOP package for high-efficiency SMPS designs. Operates from 9.5 V to 19 V Vcc with current-mode control for AC-DC adapters and server power supplies above 100 W. Available from stock with worldwide shipping.

8-bit ultra-low-power MCU, up to 8 KB Flash, up to 256 bytes data EEPROM, RTC, timers, USART, I2C, SPI, ADC, comparators

STMicroelectronics ADP360120W3 is an automotive-grade ACEPACK DRIVE power module with sixpack topology, 1200 V rating, and 2.55 mOhm typical RDS(on) using 3rd-generation SiC MOSFET technology. Available from stock with worldwide shipping.

High-side switch controller with intelligent fuse protection for 12 V, 24 V and 48 V automotive applications

ADP480120W3 is an automotive-grade ACEPACK DRIVE SiC power module in a sixpack topology rated at 1200 V and 488 A, featuring third-generation SiC MOSFET technology with 1.9 mΩ typical on-resistance for high-efficiency motor drives and inverters.

STMicroelectronics STM706T/S/R is a microprocessor voltage supervisor with push-pull reset output, 200 ms reset timeout, and watchdog timer in SOIC-8 package. Monitors a 5 V supply with 4.65 V threshold and supports manual reset input. Available from stock with worldwide shipping.

STMicroelectronics STM32U575OGY6Q is an ultra-low-power 32-bit ARM Cortex-M33 microcontroller with TrustZone security, FPU, and SMPS, delivering 240 DMIPS from 2MB Flash and 786KB SRAM. It targets secure IoT edge devices requiring hardware encryption and extended battery life. Available from stock with worldwide shipping.

Mainstream Value line, Arm Cortex-M0+ MCU with 64 Kbytes of Flash memory, 18 Kbytes RAM, 64 MHz CPU, 2x USART, timers, ADC, comm. I/F, 2-3.6V

High bandwidth (30MHz) Low offset (200µV) Rail-to-rail 5V Op amp

The ST62T62CM6 is an STMicroelectronics 8-bit ST6200-family OTP microcontroller running at up to 8 MHz from a 3 V to 6 V supply, featuring a built-in ADC, DAC, and 16-pin SOIC package rated for -40°C to +85°C operation. It integrates boundary-scan test support and is suitable for low-cost embedded control applications.

BLUENRG-LPS is a STMicroelectronics integrated circuit for embedded, industrial, and mixed-signal electronic designs. It provides Quad Flat No-Lead details for compact PCB layouts and purchasing checks. From RFQ pricing, it supports in-stock sourcing and worldwide.

6-axis IMU (inertial measurement unit) with embedded sensor fusion, AI, Qvar and hearable features for TWS

High-accuracy automotive 6-axis inertial module for car electronic control units with ASIL-B certification

Mainstream Arm Cortex-M0+ 32-bit MCU, up to 128KB Flash, 144KB RAM, 6x USART, timers, ADC, DAC, comm. I/Fs, 1.7-3.6V

Mainstream Arm Cortex-M0+ MCU with 128 Kbytes of Flash memory, 36 Kbytes RAM, 64 MHz CPU, 4x USART, timers, ADC, DAC, comm. I/F, 1.7-3.6V

Ultra-low-power Arm® Cortex®-M33 32-bit MCU+TrustZone®+FPU, 240 DMIPS, up to 2 MB Flash memory, 786 KB SRAM, crypto

STMicroelectronics ST4SIM-201A-MFF is an integrated circuit for electronic assemblies. Key specs include 2 pins and Small Outline No-lead package. Request pricing, stock checks, and worldwide shipping support from FindMyChip.

Mainstream Arm Cortex-M0+ MCU with 128 Kbytes of Flash memory, 36 Kbytes RAM, 64 MHz CPU, 4x USART, timers, ADC, DAC, comm. I/F, 1.7-3.6V

High-performance and DSP with DP-FPU, Arm Cortex-M7 MCU with 1 MByte Flash, 564 KBytes RAM, 550 MHz CPU, L1 cache, external memory interface, SMPS, subset of peripherals

LQFP-100

STMicroelectronics STM32L431VCI3 is an ultra-low-power Arm Cortex-M4 MCU with FPU delivering 100 DMIPS at 80 MHz. Features 256KB Flash, 64KB SRAM, and integrated analog peripherals including 12-bit ADC and DAC. Available in UFBGA-100 package for battery-powered IoT and wearable applications.

The ST25DV64KC-IE8C3 is a dynamic NFC/RFID tag IC from STMicroelectronics with 64-Kbit EEPROM, fast transfer mode, energy harvesting, and an optimized I2C interface. It supports ISO 15693 and ISO 18000-3 Mode 1 protocols for contactless reading and writing. Available from stock with worldwide shipping.

TSZ121IYCT is a zero-drift micropower operational amplifier with 5 µV typical and 8 µV maximum input offset voltage for ultra-precise signal conditioning up to 5 V supply. It features 115 dB minimum CMRR and 0.0002 µA typical bias current in a 5-pin SOT23 package. Available in stock with worldwide shipping.