Integrated Circuit

Instrumentation Amplifiers Low Drift, Low Noise Instrumentation Amp

LTC6229HMS8E#TRPBF is a precision, low-noise, high-speed operational amplifier from Analog Devices with 730 MHz bandwidth and 95 dB CMRR minimum. Supports voltage-feedback architecture with 4.1 µA max bias current, ideal for demanding signal-chain applications. Available in compact MSOP-8 package with AEC-qualified options for industrial use.

LTC6229IMS8E#TRPBF is an integrated circuit from Analog Devices for embedded control and signal-processing. It provides 8 pins in Small Outline Packages format for repeatable production sourcing. From $0.00 in stock worldwide shipping.

4-Channel, 1kVRMS, 2.75kVRMS, and 3.75kVRMS Digital Isolators

Battery Management USB Charger Detection with Integrated Overvoltage Protection

Analog Devices MAX195BEPE+ is an integrated circuit for embedded control and industrial electronics designs. Key specs include 16 positions, 70 deg C maximum, 16-PDIP-300_MIL based on the available part data. From $0 inquire online for sourced stock and worldwide shipping support.

LINEAR TECHNOLOGY - LTC3621IMS8E-2#PBF - DC-DC Switching Buck Step Down Regulator, Adjustable, 2.7V-17Vin, 600mV-17Vout, 1Aout, MSOP-8

Conv DC-DC 2.7V to 17V Synchronous Step Down Single-Out 0.6V to 17V 1A Automotive 8-Pin MSOP EP Tube

DC TO DC CONVERTER

Active Clamp Synchronous Forward Controllers with Internal Housekeeping Controller

DAC 2-CH 12-bit 8-Pin MSOP

Battery Management Wearable Charge Management Solution

Conv DC-DC 2.7V to 17V Synchronous Step Down Single-Out 0.6V to 17V 1A Automotive 8-Pin MSOP EP T/R

LDO Voltage Regulators 1.5A, L N, Neg Lin Reg w/ Prec C Lim

DAC 1-CH 10-bit 8-Pin TSOT-23 T/R

RS-232 Interface IC 3.0V to 5.5V, Low-Power, up to 1Mbps, True RS-232 Transceivers Using Four 0.1 uF External Capacitors

Linear Voltage Regulators Ultra-Low Noise 200mA LDO

Maxim Integrated MAX3222EEPN+, Line Transceiver, EIA/TIA-232, V.24, V.28 2-TX 2-RX 2-TRX, 3 → 5.5 V, 18-Pin PDIP

Real Time Clock Low Current Real Time Clock with I2C Interface and Power Management

MAX5120AEEE+ from Analog Devices is a integrated circuit for industrial, communications, consumer, and embedded electronic designs. Key specs include 16 pins, Small Outline Packages package, and 12 Bit Digital to Analog Converter 1 16-QSOP. From.

Switching Voltage Regulators 42VIN uP No-Opto Iso Fly Conv w/ 65V/3.6

Hot Swappable Dual I2C Isolator

MAX16152ABAD+ is a Analog Devices integrated circuit for industrial electronics, embedded systems, maintenance builds, and production sourcing programs. It combines 6-pin configuration, BGA assembly style, and datasheet-backed identification. From RFQ-based sourcing, in-stock options can support worldwide shipping.

LDO Voltage Regulators 2A &4A NMOS LDO Linear Regulator

Modulator / Demodulator 30MHz to 1.4GHz Wideband IQ Demodulator with IIP2 and DC Offset Control

250mA, 4V to 80V Low Dropout Micropower Linear Regulator

Supervisory Circuits Open Drain Microprocessor Supervisor I.C

Analog Devices AD5754RBREZ, 4-Channel Serial DAC, 1.1Msps, 24-Pin TSSOP

MAX9651AUA+T is a Analog Devices Operational Amplifier for signal conditioning and active filtering. Key specs include 8 pins, -40°C to 125°C, and 9651A. Request quote pricing, in-stock sourcing, and worldwide shipping for production builds.

16-CH 24-BIT DELTA-SIGMA ADC, SERIAL ACCESS, PQCC38

Analog Devices LTC4400-2EMS8#TRPBF is an integrated circuit for embedded control and industrial electronics designs. Key specs include 8 positions, -40 deg C to 85 deg C, TSSOP based on the available part data. From $0 inquire online for sourced stock and worldwide shipping support.

The PIC16F18323-E/SN is an 8-bit microcontroller from Microchip's PIC16 Enhanced family, featuring 3.5K words of Flash, 256 bytes RAM, 256 bytes EEPROM, and an integrated op-amp plus 10-bit ADC in a compact 8-pin SOIC package. It is ideal for cost-sensitive sensing, signal conditioning, and simple control applications with on-chip analog capability.

Automotive-grade N-channel 650 V, 35 mOhm typ., 64 A MDmesh DM6 half-bridge topology Power MOSFET in an ACEPACK SMIT package

TRIAC Standard 700 V 4 A Surface Mount DPAK Single -30°C ~ 125°C (TJ)

STMicroelectronics T635T-8FPA is a 6A Snubberless TRIAC rated for 800V repetitive peak off-state voltage in a TO-220AB isolated package. It features logic-level gate triggering and quadrant operation suitable for AC power switching and motor control. Available from stock with worldwide shipping.

HIGH SPEED: tPD = 4.5ns (TYP.) at VCC = 5V ■ LOW POWER DISSIPATION: ICC = 4µA(MAX.) at TA=25°C ■ 50Ω TRASMISSION LINE DRIVING CAPABILITY ■ SYMMETRICAL OUTPUT IMPEDANCE: |IOH| = IOL = 24mA (MIN) ■ BALANCED PROPAGATION DELAYS: tPLH ≅ tPHL ■ OPERATING VOLTAGE RANGE: VCC (OPR) = 2V to 6V ■ PIN AND FUNCTION COMPATIBLE WITH 74 SERIES 14 ■ IMPROVED LATCH-UP IMMUNITY

Double channel high-side driver with current sense analog feedback for automotive applications

STM32WB55VGY7 is a dual-core wireless microcontroller from STMicroelectronics combining an Arm Cortex-M4 application core at 64 MHz with an Arm Cortex-M0+ radio core supporting Bluetooth 5.2, Zigbee, and Thread in the 2.4 GHz band. It integrates 1 MB Flash and 256 KB SRAM in a 100-ball WLCSP package for compact IoT designs.

Automotive-grade ACEPACK DRIVE power module, sixpack topology, 1200 V, 3.8 mOhm typ. SiC MOSFET gen.3 based

Use the download button to access the VN9004AJTR schematic symbol, PCB footprint, and 3D model.

HIGH SPEED

STMicroelectronics M24C64-FMN6TP/B is a 64 Kbit (8K x 8-bit) I2C EEPROM offering 2-wire serial interface, 2.5 V to 5.5 V supply range, and 1 million write-cycle endurance. Suitable for configuration storage, calibration data, and parameter retention in industrial and consumer designs.

symbol. Parameter. Value. Unit. VCC. Supply Voltage. -0.5 to +7. V. VI. DC Input Voltage. -0.5 to VCC + 0.5. V. VO. DC Output Voltage. -0.5 to VCC + 0.5.

1x10 W digital input class-D automotive audio amplifier with advanced diagnostics, wide voltage operating range for telematics and e-Call application

Use the download button to access the FDA903S-6DY schematic symbol, PCB footprint, and 3D model.

1x10 W digital input class-D automotive audio amplifier with advanced diagnostics, wide voltage operating range for telematics and e-Call application

Automotive 8-bit MCU, with up to 8-Kbyte Flash memory, data EEPROM, 10-bit ADC, timers, LIN, SPI, I²C, 3 to 5.5 V

Automotive 8-bit MCU, with up to 8-Kbyte Flash memory, data EEPROM, 10-bit ADC, timers, LIN, SPI, I²C, 3 to 5.5 V

Automotive 8-bit MCU, with up to 8-Kbyte Flash memory, data EEPROM, 10-bit ADC, timers, LIN, SPI, I²C, 3 to 5.5 V

Automotive 8-bit MCU, with up to 8-Kbyte Flash memory, data EEPROM, 10-bit ADC, timers, LIN, SPI, I²C, 3 to 5.5 V