Integrated Circuit

TVSOP-24

The O919A152TRGZTQ1 is an automotive-grade PMIC from Texas Instruments featuring 4 buck DC-DC converters and 4 LDO regulators operating from 3.15 V to 5.5 V input. AEC-Q100 qualified, it powers ADAS, infotainment, and automotive SoCs, delivering 8 independent regulated voltage rails in a compact 48-pin QFN package.

Shift Register Single 8-Bit Serial to Serial/Parallel 16-Pin SOIC T/R

XLV62569APDRLT is a 2 A high-efficiency current-mode PWM synchronous buck converter with adjustable output from 0.6 V to 5.5 V and 2.5 V to 5.5 V input range. It features forced-PWM mode and is housed in a compact SOT-23-6 package with worldwide availability.

Octal Channel Single ADC SAR 1.25Msps 10-bit Parallel 32-Pin TSSOP Tube

SIMPLE SWITCHER® 3.8V to 36V, 3A Synchronous Buck Converter With Ultra-Low EMI

Texas Instruments MSP430F2122TRTVT, 16bit MSP430 Microcontroller, 16MHz, 4.352 kB Flash, 32-Pin QFN

Power Management Specialized - PMIC A 595-O917A14DTRGZRQ1

Texas Instruments SN74HC165PWG4 is an 8-bit parallel-in/serial-out shift register in the HC/UH logic family. It operates at up to 29 MHz with 50 pF load capacitance and is housed in a 16-pin TSSOP package. Available in tube packaging with RoHS-compliant e4 termination finish for modern PCB assembly.

The CD4512BMG4 is a CMOS 8-channel data selector/multiplexer IC from Texas Instruments, offering 3-state output capability for bus-sharing applications. It selects one of eight data inputs based on a 3-bit address, operates over a wide supply range, and is packaged in a 16-pin SOIC package for PCB-friendly integration.

DIP-16

RS-232 Interface IC 3-5.5V Multich RS- 232 Line Drvr/Rcvr

TEXAS INSTRUMENTS - UC2950TG3 . - HALF-BRIDGE SWITCH, 2950, TO/SOT-5

Processor Supervisor 3.08V 1 Active Low/Open Drain 5-Pin SOT-23 T/R

Texas Instruments TLC2652AMJB is a precision chopper-stabilized operational amplifier with 140 dB typical CMRR and 0.06 pA maximum input offset current, delivering near-zero DC drift for high-accuracy signal conditioning. Housed in an 8-pin ceramic DIP package, it suits military and scientific instrumentation. From $8.50 in stock with worldwide shipping.

The SN7472N3 is an AND-gated J-K master-slave flip-flop with preset and clear from Texas Instruments, featuring 3 J and 3 K AND-gated inputs with complementary outputs. It operates over the commercial 0 to 70 degrees C temperature range in a 14-pin PDIP package. Available from stock worldwide with competitive pricing for TTL logic designs.

HVQCCN,

The SN75LVDS82DGGG4 is a quad LVDS differential line receiver from Texas Instruments, compliant with EIA-644 and TIA-644 standards, in a 56-pin TSSOP package. It provides four independent low-voltage differential signaling receiver channels with true (non-inverted) outputs for high-speed point-to-point data communication. Suitable for display interfaces and high-speed serial links in embedded systems.

The TLVAIC3104IRHBRG4 is a low-power stereo audio codec from Texas Instruments operating on a 1.8 V supply, integrating ADC, DAC, and headphone amplifier functions. It is packaged in a 32-pin QFN and suited for portable audio applications. The device offers flexible routing and programmable digital audio processing for compact audio designs.

SN74LS26NE4 is a quad 2-input high-voltage NAND gate from Texas Instruments in the 74LS logic family with open-collector outputs, 14-pin DIP package, and 8 mA output sink current. It is designed for 5 V TTL systems requiring bus-compatible wired-AND logic and direct interfacing to higher-voltage loads.

TPS2813PWRG4 is a dual high-side MOSFET gate driver with Schmitt trigger inputs and NAND gate logic, supporting up to 2A peak output current. Operates with an 8V to 40V regulator input supply for robust power switching. Available from Texas Instruments in PDSO-G8 package with worldwide shipping.

Gate Drivers Dual H-S MOSFET Driver

TRS232INE4 is a dual RS-232 driver/receiver interface IC by Texas Instruments, fully compliant with EIA-232-F and TIA-232-F standards, housed in a 16-pin DIP package. Key specs: 2 drivers and 2 receivers, Schmitt trigger inputs, operates from single 5V supply. Available in stock with worldwide shipping.

Monostable Multivibrator CMOS Low-Power Monostable/Astable Multivibrator 14-CDIP -55 to 125

The CD4047BPWRG4 is a CMOS low-power monostable/astable multivibrator from Texas Instruments' 4000-series logic family. It features retriggerable one-shot operation, complementary outputs, and supports both astable and monostable timing modes using a single external RC network. Available in a 14-pin SOP package with tape-and-reel packaging for automated assembly.

SN7497NE4 is a TTL 6-bit binary rate multiplier that generates output pulse trains at rates proportional to a 6-bit input word. It operates from 0°C to 70°C in a 16-pin PDIP package with 15 pF load capacitance. Enable inputs, complementary outputs, and cascading support make it suitable for frequency synthesis and digital timing circuits.

32-bit Microcontrollers - MCU PiccoloG 32-bit MCU with 100 MHz, FPU, TMU, 256 KB Flash, PGAs, SDFM 64-LQFP -40 to 125

5-V Dual RS-232 Line Driver/Receiver With +/-15 kV ESD Protection

TLK2711AIRCPRG4 is a high-speed serializer/deserializer (SerDes) transceiver from Texas Instruments supporting 1.6 to 2.7 Gbps data rates for point-to-point serial links. Housed in a 64-pin TQFP package with heat slug for thermal management. Available from stock with worldwide shipping.

Video Switch ICs Quad SPDT Wide BW Video Sw

Power Management IC Development Tools LP5951 EVAL BOARD

XTPS61322DBZT is a current-mode PWM boost switching regulator from Texas Instruments accepting inputs from 0.9 V to 5.5 V in a SOT-23-3 package. It targets ultra-low-voltage energy harvesting and single-cell battery boost applications, available worldwide.

DRV1100P Texas Instruments, Op Amp

The PCI2060IGHK is a PCI bus bridge controller from Texas Instruments with 32-bit address and data bus widths and up to 66MHz clock frequency for high-throughput peripheral interfacing. It comes in a 257-ball fine-pitch BGA package (19x19mm) for compact PCB designs. Available in stock worldwide for embedded systems and PCI peripheral card designs.

Texas Instruments XLV62568APDRLT is a 1 A high-efficiency synchronous step-down buck converter with forced PWM mode and 2.5 V to 5.5 V input in a compact SOT563 package. Output voltage is adjustable from 0.6 V to 5.5 V via external resistors. Available from stock with worldwide shipping.

LM324ADBRE4 is a quad general-purpose operational amplifier from Texas Instruments featuring four independent voltage-feedback op-amps in a single SSOP-14 package. Offers 65 dB minimum CMRR, 200 nA max input bias current, and operates from single or split supplies, making it versatile for analog signal conditioning. Available in automotive-grade E4 tape-and-reel packaging for high-volume production with enhanced traceability.

Texas Instruments XLV62585DRLT is a 3 A high-efficiency synchronous step-down DC-DC converter with 2.5 V to 5.5 V input and 0.6 V to 5.5 V adjustable output in a compact SOT563 package. Operates in PWM current-mode control with high efficiency. Available from stock with worldwide shipping.

SN74ACT245DWE4 is an octal bidirectional bus transceiver with 3-state outputs by Texas Instruments in the ACT logic family, housed in a 20-pin wide SOIC package. Key specs: 8-bit bidirectional data transfer with direction control, 24mA output sink current, operates from 5V supply. Available in stock with worldwide shipping.

Texas Instruments MAX3318EIDB, Dual Line Transceiver, RS-232 2-TX 2-RX 2-TRX, 2.5 V, 20-Pin SSOP

The LMH1981MTNOPB is a video sync separator IC from Texas Instruments in a 14-pin TSSOP package. It extracts horizontal and vertical sync signals from composite or Y/C video inputs, supporting standard video formats. Available from stock with worldwide shipping.

Use the download button to access the CC2530F64RHAR schematic symbol, PCB footprint, and 3D model.

OP Amp Single GP ±8V/16V 8-Pin PDIP Tube

Texas Instruments CD74HC85MG4 is a cascadable 4-bit magnitude comparator with three comparison outputs (A>B, A=B, A<B). Operates with 50 pF load capacitance in a 16-pin SOIC package. Available from stock with worldwide shipping.

The CD74HC85M96E4 is a High-Speed CMOS 4-Bit Magnitude Comparator from Texas Instruments. It supports cascadable operation with three comparison outputs (A>B, A<B, A=B) and operates at 50 pF load capacitance with 5.2 mA output current. Available in a 16-pin SOIC package with RoHS-compliant e4 rating.

The CD74HC85M96G4 is a 4-bit magnitude comparator IC in a 16-pin SOIC package from Texas Instruments. It compares two 4-bit binary words and provides three outputs indicating A>B, A=B, or A<B. Cascadable design supports multi-stage comparisons for wider data widths. Available from major distributors with worldwide shipping.

Quadruple general-purpose operational amplifier<br />&nbsp;

Texas Instruments LM319 MWA is a dual high-speed voltage comparator operating from ±2 V to ±18 V or a single 36 V supply with fast 80 ns response time. It features open-collector outputs compatible with TTL, CMOS, and ECL logic families. Available in wafer form for custom hybrid circuits and in stock for fast worldwide shipping.

The SN74LS26DG4 is a quad 2-input NAND gate with open-collector outputs from Texas Instruments, built using Low-power Schottky (LS) TTL technology. It contains four independent 2-input NAND gates with open-collector outputs supporting wired-AND configurations, with a maximum sink current of 8 mA. Available in a 14-pin SOIC package, it is widely used in digital logic design and system bus applications requiring TTL-compatible logic.

The TS5A22364DGSRG4 is a dual SPDT analog switch IC with 0.65 Ω on-resistance in a 10-pin MSOP package. It offers 18.3 MHz bandwidth, 70 dB off-state isolation, and 1.65 V to 5.5 V supply range. Suitable for audio, video, and data multiplexing in portable consumer electronics.

OP Amp Single GP ±8V/16V 8-Pin SOIC T/R