SN74LS26DG4 Texas Instruments Integrated Circuit (Small Outline Packages) In Stock
The SN74LS26DG4 is a quad 2-input NAND gate with open-collector outputs from Texas Instruments, built using Low-power Schottky (LS) TTL technology. It contains four independent 2-input NAND gates with open-collector outputs supporting wired-AND configurations, with a maximum sink current of 8 mA. Available in a 14-pin SOIC package, it is widely used in digital logic design and system bus applications requiring TTL-compatible logic.
- Manufacturer
- Texas Instruments
- Package
- Small Outline Packages
- Pin Count
- 14
- Lifecycle
- OBSOLETE
- Datasheet
- SN74LS26DG4 Datasheet PDF
- Category
- Integrated Circuit
- Temp Range
- ?°C to 70.0°C
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
What are the key features of SN74LS26DG4?
- Four independent 2-input NAND gates with open-collector outputs
- Open-collector output supports wired-AND logic configurations
- Low-power Schottky (LS) TTL family for reduced power consumption
- 8 mA output sink current capacity
- 14-pin SOIC package for surface-mount applications
What is SN74LS26DG4 used for?
The SN74LS26DG4 is used in digital logic circuits requiring wired-AND bus structures, bus interface logic, and TTL-to-open-collector signal conversion. It finds broad application in microprocessor system design, memory address decoding, and programmable logic interface circuits.
What are the specifications of SN74LS26DG4?
| YTEOL | 0 |
| Family | LS |
| JESD-30 Code | R-PDSO-G14 |
| JESD-609 Code | e4 |
| Load Capacitance (CL) | 15pF |
| Logic IC Type | NAND GATE |
| Max I(ol) | 0.008A |
| Number of Functions | 4 |
| Number of Inputs | 2 |
| Output Characteristics | OPEN-COLLECTOR |
| Package Body Material | PLASTIC/EPOXY |
| Package Equivalence Code | SOP14,.25 |
| Package Shape | RECTANGULAR |
| Package Style | SMALL OUTLINE |
| Packing Method | TUBE |
| Peak Reflow Temperature (Cel) | 260 |
| Power Supply Current-Max (ICC) | 4.4mA |
| Prop. Delay@Nom-Sup | 32ns |
| Propagation Delay (tpd) | 28ns |
| Qualification Status | Not Qualified |
| Schmitt Trigger | NO |
| Supply Voltage-Max (Vsup) | 5.25V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Supply Voltage-Nom (Vsup) | 5V |
| Surface Mount | YES |
| Technology | TTL |
| Temperature Grade | COMMERCIAL |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Terminal Form | GULL WING |
| Terminal Pitch | 1.27mm |
| Terminal Position | DUAL |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Package | Small Outline Packages |
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
| Moisture Sensitivity Level | MSL 1 |
| HTS Code | 8542.39.00.60 |
| Country of Origin | Malaysia |
Where can I find the SN74LS26DG4 datasheet?
SN74LS26DG4 Datasheet DownloadOfficial datasheet from Texas Instruments
What are equivalent replacements for SN74LS26DG4?
Compatible alternatives and drop-in replacements for SN74LS26DG4:
Frequently Asked Questions
What type of logic gates does the SN74LS26DG4 contain?
The SN74LS26DG4 contains four independent 2-input NAND gates with open-collector outputs. The open-collector design allows multiple outputs to be wire-AND connected together on a shared bus without causing logic conflicts.
What is the maximum sink current for the SN74LS26DG4 open-collector outputs?
The SN74LS26DG4 open-collector outputs can sink a maximum of 8 mA (I_OL = 8 mA). This makes it suitable for driving indicator LEDs, relays, or other loads that require moderate current sinking capability in open-collector wired-AND configurations.
In what package is the SN74LS26DG4 available, and what does the 'G4' suffix indicate?
The SN74LS26DG4 is available in a 14-pin Small Outline IC (SOIC) package. The 'G4' suffix in Texas Instruments part numbering indicates the device is RoHS-compliant and shipped in a specific tape-and-reel packaging format suitable for automated surface-mount assembly.
How does the SN74LS26DG4 differ from other NAND gate variants like the SN74LS00?
The key difference is the output type. The SN74LS00 uses totem-pole (push-pull) outputs that actively drive both high and low logic levels, whereas the SN74LS26DG4 uses open-collector outputs that only actively pull the output low. The SN74LS26DG4 requires an external pull-up resistor to establish a logic high, but this enables multiple outputs to share the same line in wired-AND bus configurations, which totem-pole outputs cannot safely do.
What is the recommended pull-up resistor value when using the SN74LS26DG4 open-collector outputs?
The pull-up resistor value depends on the supply voltage, load current requirements, and switching speed. A typical starting point for 5 V TTL systems is between 1 kΩ and 10 kΩ. Lower resistance values allow faster rise times and support heavier loads, but increase power consumption. Higher values reduce power draw but slow the output rise time. The specific value should be calculated based on the required I_OL of 8 mA maximum and the total capacitive load, including the specified 15 pF load capacitance in the datasheet.
Related Guides
CSD87313DMS Synchronous Buck Power Stage Design Guide
Design a compact CSD87313DMS synchronous buck stage with practical guidance for loss, gate drive, PCB layout, EMI, thermal validation, and sourcing.
Aug 6, 2026
STEF05SGR eFuse Selection Guide for 5 V Overcurrent Protection
Choose STEF05SGR for 5 V overcurrent protection by checking current-limit margin, inrush, thermal loss, fault response, and sourcing.
Aug 6, 2026
C0402C103K3RACTU Selection Guide: Choosing a 10 nF 0402 MLCC
Select C0402C103K3RACTU by voltage margin, X7R behavior, tolerance, 0402 assembly risk, and qualified alternatives.
Aug 4, 2026
STM32H753VIT6 MCU Selection Guide: Memory, Package, Connectivity, and Security
Choose STM32H753VIT6 by evaluating memory architecture, LQFP-100 pin fit, connectivity, security, power, and sourcing tradeoffs.
Aug 4, 2026
Why Buy from FindMyChip
About Texas Instruments
Texas Instruments (TI) is a global semiconductor company headquartered in Dallas, Texas. TI designs and manufactures analog and embedded processing chips used in industrial, automotive, consumer, communications, and enterprise systems.
More from Texas Instruments
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“Their engineering team helped us find a pin-compatible alternative when our original MCU went EOL.”
You May Also Like
ACS770ECB-200U-PFF-T
Allegro Microsystems
Integrated Circuit
ACS770KCB-150U-PFF-T
Allegro Microsystems
Integrated Circuit
MC33901WEF
NXP
Integrated Circuit
MC7808BDTRKG
ON Semiconductor
Integrated Circuit
PA94EC
Apex Microtechnology
Integrated Circuit
AP7315-28SR-7
Diodes Inc.
Integrated Circuit
74HCT245D
Nexperia
Integrated Circuit
CY62256VNLL-70ZXCT
Cypress Semiconductor
Integrated Circuit
EPM7032AETC44-4N
Intel
Integrated Circuit
EPM3512AQC208-10N
Intel
Integrated Circuit
EPM3256ATC144-7N
Intel
Integrated Circuit
EPM3256AQC208-7N
Intel
Integrated Circuit
EPM3256AQC208-10N
Intel
Integrated Circuit
EPM3128ATC100-7N
Intel
Integrated Circuit
EPM1270F256C4N
Intel
Integrated Circuit
EPF8282ATC100-4N
Intel
Integrated Circuit
EPF6016QC208-2N
Intel
Integrated Circuit
EPF6016ATC144-3N
Intel
Integrated Circuit
EPF10K30ATC144-3N
Intel
Integrated Circuit
EPC2TI32N
Intel
Integrated Circuit
EPC2LC20
Intel
Integrated Circuit
EP3SL150F1152C4N
Intel
Integrated Circuit
EP2SGX60DF780C5N
Intel
Integrated Circuit
EP2SGX60CF780C5N
Intel
Integrated Circuit