Integrated Circuit
Integrated Circuit components are essential building blocks in modern electronic systems. FindMyChip sources Integrated Circuit ICs from authorized China distributors with competitive pricing and reliable stock.
77,666 components
How to Choose Integrated Circuit Components
- 1Verify electrical specifications (voltage, current, frequency) match your design requirements.
- 2Check package footprint and thermal characteristics against your PCB layout constraints.
- 3Confirm lifecycle status and long-term availability for production designs.
Popular Applications
Consumer Electronics
Smartphones, tablets, and smart home devices
Industrial Systems
Factory automation, control systems, and monitoring
Automotive
In-vehicle electronics and advanced driver assistance
Telecommunications
Base stations, routers, and network equipment
Integrated Circuit Guides & Articles
CSD87313DMS Synchronous Buck Power Stage Design Guide
Design a compact CSD87313DMS synchronous buck stage with practical guidance for loss, gate drive, PCB layout, EMI, thermal validation, and sourcing.
Aug 6, 2026
STEF05SGR eFuse Selection Guide for 5 V Overcurrent Protection
Choose STEF05SGR for 5 V overcurrent protection by checking current-limit margin, inrush, thermal loss, fault response, and sourcing.
Aug 6, 2026
C0402C103K3RACTU Selection Guide: Choosing a 10 nF 0402 MLCC
Select C0402C103K3RACTU by voltage margin, X7R behavior, tolerance, 0402 assembly risk, and qualified alternatives.
Aug 4, 2026
STM32H753VIT6 MCU Selection Guide: Memory, Package, Connectivity, and Security
Choose STM32H753VIT6 by evaluating memory architecture, LQFP-100 pin fit, connectivity, security, power, and sourcing tradeoffs.
Aug 4, 2026
All Integrated Circuit Components
Showing 55,351–55,400 of 77,666
The TLV4111IDGNRG4 is a single low-voltage op-amp with high output drive capability from Texas Instruments. Key specs: 68 dB min CMRR, 25 pA bias current, 4 mV max input offset voltage. Available in a small outline package, in stock with worldwide shipping.
Transistor Output Optocouplers Optocoupler 6-PDIP
Conv DC-DC 2.3V to 4.85V Step Up Single-Out 2.85V to 4.4V 16-Pin DSBGA T/R
Single Channel Single ADC SAR 20ksps 12-bit Serial 8-Pin SOIC Tube
SN74ALS00ADRE4 is a 14 pins integrated circuit by Texas Instruments. Key specs: 14 pins, Small Outline Packages package, NAND Gate 4-Element 2-IN Bipolar 14-Pin SOIC T/R. From quote-based sourcing, in stock checks support worldwide shipping.
Power Factor Correction - PFC Natural Interleaving transition-mode PFC controller with high light-load efficiency 16-SOIC -40 to 125
Motor / Motion / Ignition Controllers & Drivers 10A H-Bridge Motor Driver with Integrated Current Sensing and Current Sense Output
Analog Switch Single SPST 5-Pin SC-70 T/R
The INA2143UG4 is a dual precision difference amplifier from Texas Instruments with voltage-feedback architecture, offering a minimum CMRR of 86dB (typical 96dB) and a maximum input offset voltage of 500µV. It operates on ±18V or 36V single supply and is housed in a 14-pin SOIC package, making it ideal for differential voltage measurement and signal conditioning in industrial instrumentation.
3.8-V to 36-V, 3-A synchronous step-down voltage converter
Texas Instruments SN74HC11PWG4 is a triple 3-input AND gate in CMOS HC logic family. It operates from 2V to 6V supply, offers 14-pin TSSOP package with 50 pF load capacitance and 4 mA output drive.
Switching Voltage Regulators Regulated 3.3-V Charge Pump
Specialty Function Logic Single Bus Buffer Gate With 3-State Outputs 5-SC70 -40 to 85
The SN74ALS04BDG4 is a hex inverter from Texas Instruments in the Advanced Low-power Schottky (ALS) logic family, providing six independent single-input NOT gate functions. It operates from a 5V supply in a 14-pin SOIC package and features a 50 pF load capacitance rating with 8 mA output sink current. Suitable for signal inversion, clock complementing, and logic level driving in industrial and computing systems.
NAND Gate 4-Element 2-IN CMOS 14-Pin TSSOP Tube
Switching Voltage Regulators Regulated 3.3-V Charge Pump
Inverters HEX INVERTERS
Buffers & Line Drivers Octal Buff/Line Drvr W/3-State Otpt
MCU 16-bit MSP430 MSP430 RISC 8KB Flash 2.5V/3.3V 20-Pin TVSOP T/R
TPS60140PWPG4 is a switched-capacitor charge pump from Texas Instruments that steps up a 1.8 V to 3.6 V input to a regulated 5 V output at up to 100 mA, packaged in a 20-pin HTSSOP with exposed pad for low-profile power management designs.
LOG101AIDE4 is a Texas Instruments TEXAS INSTRUMENTS - LOG101AIDE4 - Logarithmic Amplifier 2 Amplifier 7.5. Key details include 8 pins, Small Outline Packages packaging, and Integrated Circuit classification for production BOM review. Request current pricing for stocked supply and worldwide shipping.
TEXAS INSTRUMENTS - TPS56920PWP - DC-DC Switching Buck Step Down Regulator, Adjustable, 4.5V-17Vin, 600mV-1.87Vout, 9Aout, HTSSOP-20
Digital to Analog Converters - DAC 16-Bit Ultra-Lo Pwr Vltg Output Cnvtr
Counter Shift Registers Serial-out shift Register
Switching Voltage Regulators Reg 5-V Charge Pump
The CD74AC74M96E4 is a dual D-type positive-edge-triggered flip-flop from Texas Instruments in the AC CMOS logic family, featuring preset and clear inputs on each flip-flop. Operating at up to 9MHz clock frequency with a 50pF load, it is housed in a 14-pin SOIC package and is suited for register, counter, and sequencing applications in digital systems.
MCU 32-bit Piccolo F2803x C28x RISC 128KB Flash 1.8V/3.3V 56-Pin VQFN EP
The TPA122DG4 is a dual-channel stereo audio power amplifier from Texas Instruments delivering 0.07W output power per channel with 0.1% harmonic distortion. It features 20kHz bandwidth and is housed in an 8-pin SOIC package. From $0.75 in stock with worldwide shipping.
16-bit, 2-kSPS, 4-ch, low-power, small-size delta-sigma ADC with PGA, VREF, 2x IDACs & I2C interface
Use the download button to access the TMS320F28034PAGQR schematic symbol, PCB footprint, and 3D model.
Bus Transceivers OCTAL BUS TRANSCEIVER
Operational Amplifiers - Op Amps Low-Noise High-Speed JFET-Input
Texas Instruments SN74HC132PWTG4 is a quad 2-input NAND gate with Schmitt-trigger inputs in a 14-pin TSSOP package. Operates from 2 V to 6 V supply, supports 4 independent NAND functions with noise immunity up to 0.9 V. Available in tape-and-reel format for automated PCB assembly.
GREEN, PLASTIC, DIP-8
TPS2376DRG4 is a single-channel IEEE 802.3af/at PoE powered-device controller supporting up to 57 V input and 13 W output in an 8-pin SOIC package for Ethernet-powered equipment.
NAND Gate 4-Element 2-IN CMOS 14-Pin SOIC T/R
Power Switch ICs - POE/LAN IEEE 802.3af PoE Pwr Device Cntrler
Adjustable precision shunt regulator
SC-70, 5 PIN
Octal Buffers/Drivers With Open-Collector Outputs
Octal Buffers/Drivers With 3-State Outputs
Buffers & Line Drivers 3.3V ABT Octal Buff/Drv W/3-St Otpt
Translation - Voltage Levels EP Octal Dual-Supply Bus Xcvr
16-Bit Ultra-Low-Power Microcontroller, 8kB Flash, 256B RAM, USART, Comparator
Use the download button to access the TMS3705EDRQ1 schematic symbol, PCB footprint, and 3D model.
The TLV2262AIDG4 is a dual rail-to-rail output operational amplifier from Texas Instruments with 1.5 MHz bandwidth and ultralow input bias current of 60 pA typical. It operates over a -40°C to +125°C industrial temperature range from a single 2.5V to 16V or dual ±1.25V to ±8V supply. Packaged in a compact 8-pin SOIC for space-efficient industrial designs.
Operational Amplifiers - Op Amps Dual Rail-To-Rail Lo-Vltg Lo-Power
Counter ICs Dual 4-Bit Binary Counter
10:1 LVDS Serdes Transmitter 100 - 660Mbps
The CD4060BCN is a 14-stage ripple-carry binary counter and oscillator IC from the CMOS 4000 logic family. It features an on-chip oscillator with external RC or crystal connections, asynchronous reset, and outputs from stages 3 through 14, operating from 3 V to 15 V in a 16-pin DIP package.
Need Integrated Circuit Components?
Get competitive quotes from authorized China distributors
Request a Quote