TPS60140PWPG4 Texas Instruments Integrated Circuit (Small Outline Packages) In Stock

TPS60140PWPG4 is a switched-capacitor charge pump from Texas Instruments that steps up a 1.8 V to 3.6 V input to a regulated 5 V output at up to 100 mA, packaged in a 20-pin HTSSOP with exposed pad for low-profile power management designs.

OBSOLETEIntegrated CircuitVerified Jun 2026
Package / Visual Reference
TPS60140PWPG4Small Outline Packages
Quick Facts
Manufacturer
Texas Instruments
Package
Small Outline Packages
Pin Count
20
Lifecycle
OBSOLETE
Category
Integrated Circuit
Temp Range
-40.0°C to 85.0°C
RoHS
Compliant
Lead Time
3–7 business days
Shipping
DHL Express · Worldwide

What are the key features of TPS60140PWPG4?

  • Regulated 5 V output from 1.8 V to 3.6 V input supply with up to 100 mA output current
  • Switched-capacitor (charge pump) topology requires no inductor, reducing BOM and board area
  • 20-pin HTSSOP package with exposed thermal pad for efficient heat dissipation
  • Low quiescent current suitable for battery-powered portable and IoT devices
  • RoHS-compliant (JESD-609 e4) construction for global market compliance

What is TPS60140PWPG4 used for?

Ideal for battery-powered portable equipment where a 5 V rail is needed from a single-cell Li-ion or 3-cell alkaline battery stack, such as USB accessories, handheld instruments, and wearables. Its inductor-free charge pump architecture minimizes electromagnetic interference and PCB footprint, making it attractive for space-constrained IoT nodes and medical wearables. The 100 mA output also supports low-power USB device enumeration and sensor bias supply generation.

What are the specifications of TPS60140PWPG4?

YTEOL0
Analog IC - Other TypeSWITCHED CAPACITOR REGULATOR
Input Voltage-Max3.6V
Input Voltage-Min1.8V
Input Voltage-Nom2V
JESD-30 CodeR-PDSO-G20
JESD-609 Codee4
Number of Functions1
Output Current-Max0.1A
Output Voltage-Nom5V
Package Body MaterialPLASTIC/EPOXY
Package Equivalence CodeTSSOP20,.25
Package ShapeRECTANGULAR
Package StyleSMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH
Peak Reflow Temperature (Cel)260
Qualification StatusNot Qualified
Surface MountYES
Switcher ConfigurationTRIPLER
Switching Frequency-Max450kHz
TechnologyBICMOS
Temperature GradeINDUSTRIAL
Terminal FinishNICKEL PALLADIUM GOLD
Terminal FormGULL WING
Terminal Pitch0.65mm
Terminal PositionDUAL
Time@Peak Reflow Temperature-Max (s)30
PackageSmall Outline Packages

Compliance & Regulatory

RoHS StatusCompliant
Lead-FreeYes (Pb-Free)
Moisture Sensitivity LevelMSL 2
ECCNEAR99
HTS Code8542.39.00.60

Where can I find the TPS60140PWPG4 datasheet?

TPS60140PWPG4 Datasheet Download

Official datasheet from Texas Instruments

What are equivalent replacements for TPS60140PWPG4?

Compatible alternatives and drop-in replacements for TPS60140PWPG4:

TPS60140PWPTexas Instruments

Switched Capacitor Regulator, Voltage-mode, 0.1A, 450kHz Switching Freq-Max, BICMOS, PDSO20

View Part →
TPS60140PWPRG4Texas Instruments

Switched Capacitor Regulator, Voltage-mode, 0.1A, 450kHz Switching Freq-Max, BICMOS, PDSO20

View Part →
TPS60140PWPRTexas Instruments

Switched Capacitor Regulator, Voltage-mode, 0.1A, 450kHz Switching Freq-Max, BICMOS, PDSO20

View Part →

Frequently Asked Questions

Can the TPS60140PWPG4 supply a 5 V USB bias rail from a single-cell Li-ion battery?

Yes. The TPS60140PWPG4 accepts an input voltage as low as 1.8 V and regulates the output to 5 V at up to 100 mA, making it suitable for USB bias and accessory power rails driven directly from a 3.7 V Li-ion cell.

Does the TPS60140PWPG4 require an external inductor, and how does that affect PCB layout complexity?

No inductor is required. The TPS60140PWPG4 uses a switched-capacitor charge pump topology, so only small external flying and filter capacitors are needed, significantly reducing the 20-pin HTSSOP footprint and PCB layer count compared to boost converter solutions.

What is the maximum output current of the TPS60140PWPG4, and is it sufficient for a sensor cluster subsystem?

The device delivers up to 100 mA at the regulated 5 V output. This level is sufficient for powering multiple low-power sensors, op-amp circuits, or MEMS microphones in a sensor cluster subsystem without external load switches.

How does the HTSSOP-20 package affect thermal performance compared to a standard TSSOP?

The 20-pin HTSSOP package includes an exposed thermal pad on the underside, which lowers junction-to-board thermal resistance. This allows the TPS60140PWPG4 to sustain higher continuous output currents up to 100 mA without exceeding thermal limits in compact enclosures.

Related Guides

Why Buy from FindMyChip

Authorized Source
Verified supply chain with full traceability & inspection
Competitive Pricing
Factory-direct from China distributors, low MOQ
Fast Shipping
DHL Express 3–5 days · FedEx/UPS 5–7 days worldwide
Quality Guaranteed
30-day replacement for defective parts, no questions asked

About Texas Instruments

Texas Instruments (TI) is a global semiconductor company headquartered in Dallas, Texas. TI designs and manufactures analog and embedded processing chips used in industrial, automotive, consumer, communications, and enterprise systems.

AvailabilityIn Stock
Reference Price (USD)
Contact for Price
Buy from 1pc · Factory-direct pricing
pcs

In Stock · 24h Response · Worldwide Shipping

Lead Time3-7 business days
MOQFrom 1 piece
ShippingDHL / FedEx / UPS
OriginChina (Authorized)

Response within 24 hours · Worldwide shipping

Response time is incredible — usually under 4 hours. They understand that production lines can't wait.

JW
James Wright
Supply Chain Director, CircuitPro Ltd, UK