Integrated Circuit

LP324DG4 is a integrated circuit by Texas Instruments for production BOM and repair sourcing. Key specs: 14 pins, 70°C maximum, 16V, 32V. From quote-based pricing, in stock with worldwide shipping support.

The CDC328ADRG4 is a 1:6 low-skew clock buffer IC from Texas Instruments, operating up to 100 MHz and providing six true output copies of a single clock input signal. It features polarity-control inputs enabling combinations of true and complementary outputs, 48 mA output drive, and is housed in a 16-pin SOIC package. Suitable for clock distribution in FPGAs, microprocessors, and high-speed digital system designs.

The CY74FCT244ATPCE4 is an 8-channel non-inverting tri-state bus buffer/line driver in a 20-pin PDIP package. It operates from a 4.5 V to 5.5 V supply, supports up to 64 mA output current, and features TTL-compatible inputs. Available from stock worldwide.

Translation - Voltage Levels 16-Bit Level Shift Xcvr

Switching Controllers Phase Shift Resonant Controller

1-Channel Single ADC Pipelined 125Msps 14-bit Parallel/Serial/LVDS 48-Pin VQFN EP T/R

Texas Instruments PCA9546APWE4 is a 4-channel I2C and SMBus multiplexer/switch IC in a 16-pin TSSOP package with 45Ω maximum on-state resistance. It enables one master to communicate with multiple I2C slave devices sharing the same address, simplifying complex bus architectures in embedded systems.

Use the download button to access the SNJ54HC573AJ schematic symbol and PCB footprint.

SN74HCT273PWE4 is an octal positive-edge-triggered D flip-flop from Texas Instruments in the HCT CMOS logic family, providing 8 synchronous data storage elements with a common clock and asynchronous active-low reset. The device clocks data at up to 20 MHz with 4 mA output sink current and 50 pF load drive capability. Packaged in a 20-pin TSSOP, it is used for bus-width registers, data storage, and pipeline buffering in 5 V digital systems.

Flip Flops Octal D-Type Flip- Flops

TPS2814PE4 is a dual MOSFET gate driver featuring one inverting and one non-inverting channel with Schmitt trigger inputs, delivering up to 2A peak output current. Requires an 8V to 40V regulator input supply for high-side switching applications. Available from Texas Instruments in DIP-8 package with worldwide distribution.

106-dB SNR stereo digital-to-analog converter (DAC) (software control)

The PDRV8876PWPR is a 37V, 3.5A brushed DC motor driver from Texas Instruments with a half-bridge architecture, integrated current sensing, and a dedicated current sense output. Operating from 4.5V to 37V supply voltage, it comes in a 16-pin thin shrink small outline package with a heat sink slug, enabling efficient motor control in automotive and industrial designs.

10-MHz, low-noise, RRIO, CMOS operational amplifier for cost-sensitive systems

ASP00886IRGCR is a 65 pins microcontroller by Texas Instruments. Key specs: 65 pins, Quad Flat No-Lead package, 16-bit Microcontrollers - MCU. From quote-based sourcing, in stock checks support worldwide shipping.

MCU 32-bit C28x RISC 256KB Flash 3.3V 100-Pin LQFP Tray

RF Microcontrollers - MCU Ultralow-Pwr MCU SOC

Adjustable Inverting DC/DC Converter

SOC MSP430 48-Pin VQFN EP T/R

The TPS6755IDR is an inverting DC-DC switching regulator from Texas Instruments that converts a 2.7V to 9V input into a regulated -4.75V to -5.25V negative output at up to 270mA. It uses current-mode PWM control and is housed in a compact 8-pin SOIC package, ideal for generating negative supply rails in portable and battery-powered equipment.

The Texas Instruments BQ2005SG4 is a fast charge management IC designed for NiCd and NiMH dual battery applications, supporting up to 2000mA charge current with PWM current-mode control. It operates from a 4.5V to 5.5V supply and integrates dual battery fast charger functionality in a 20-pin SOIC package. This device streamlines portable device charging design by providing complete charge management in a compact, easy-to-integrate solution.

TEXAS INSTRUMENTS - TPS6755IP - IC, DC/DC INVERTER 200MA 5V, 6755I

Fast Charge Management NiCD/NiMH 2000mA 20-Pin SOIC T/R

Enhanced Product 3-V To 6-V, 3-A Output Synchronous-Buck Pwm Switcher W/Integrated Fets

PLASTIC, DIP-8

SN75LBC176DG4 is a single-channel differential bus transceiver compliant with EIA-485/TIA-485 and ISO 8482 standards, supporting data rates up to 2.5 Mbps. It features a differential Schmitt trigger receiver, tri-state outputs, and shutdown mode with receiver active in an 8-Pin SOIC package.

High frequency Dual Synchronous Rectifier Controller for LLC Converter

Motor/Motion/Ignition Controllers & Drivers Temp Monitoring and Fan Ctrl

Buffers & Line Drivers Octal Buff/Line Drvr W/3-State Otpt

Clock Drivers & Distribution 1-To-6 Clock Driver

Texas Instruments 7801201RA is an 8-channel inverting 3-state bus driver in the TTL LS logic family, housed in a 20-pin ceramic DIP package rated for high-reliability applications. Features active-low output enable control with 45 pF load capacitance and 24 mA sink current capability. Available from stock with worldwide shipping.

4-Bit Dual-Supply Bus Transceiver with Configurable Voltage-Level Shifting and 3-State Outputs

The DAC2932PFBTG4 is a dual-channel 12-bit digital-to-analog converter from Texas Instruments supporting serial, parallel, and word input formats with 2's complement binary encoding. It features a TQFP-48 surface-mount package with 0.8V maximum analog output voltage and 0.1953% linearity error for precision analog signal generation. Available in stock globally for audio, instrumentation, and industrial control applications.

Buffers & Line Drivers 16-Bit Buffer/Driver With 3-State Outputs

Clock Buffer Low Jitter Dual 1:6 Univ-to-LVPECL Bfr

Digital to Analog Converters - DAC Dual 12-Bit 40MSPS

Translation - Voltage Levels 16-Bit Level Shift Xcvr

IC BUF NON-INVERT 5.25V 20SOIC

Buffers & Line Drivers 16-Bit Buffer/Driver With 3-State Outputs

The CY74FCT244ATSOCTE4 is an 8-channel non-inverting 3-state CMOS buffer and line driver from Texas Instruments in the FCT logic family. It features two active-low output enable inputs, 64 mA output sink current, and operates at 5 V in a 20-pin SOIC package for high-drive bus buffering applications.

Analog Switch ICs SNGL Pole Doubl Thrw Analog SWCH

IC MCU 16BIT 32KB FLASH 64VQFN

Voltage References

Use the download button to access the SN74AUP1G80DCKTG4 schematic symbol, PCB footprint, and 3D model.

Octal Buffers/Drivers With 3-State Outputs

3.3-V ABT Octal Buffers/Drivers With 3-State Outputs

Bus Transceivers 16-Bit Bus Trnscvrs With 3-State Outputs

Op Amp Dual Low Noise Amplifier R-R I/O ±3V/6V Automotive 8-Pin SOIC T/R

RS-232 Interface IC Quad Line Driver/LIN

The LT1013DIPE4 is a dual precision operational amplifier from Texas Instruments in an 8-pin DIP package. It delivers 300 µV maximum input offset voltage, 97 dB minimum CMRR, and 30 nA bias current, suitable for precision measurement and industrial instrumentation. Available for worldwide shipping with lead-free compliance.