Integrated Circuit
Integrated Circuit components are essential building blocks in modern electronic systems. FindMyChip sources Integrated Circuit ICs from authorized China distributors with competitive pricing and reliable stock.
77,666 components
How to Choose Integrated Circuit Components
- 1Verify electrical specifications (voltage, current, frequency) match your design requirements.
- 2Check package footprint and thermal characteristics against your PCB layout constraints.
- 3Confirm lifecycle status and long-term availability for production designs.
Popular Applications
Consumer Electronics
Smartphones, tablets, and smart home devices
Industrial Systems
Factory automation, control systems, and monitoring
Automotive
In-vehicle electronics and advanced driver assistance
Telecommunications
Base stations, routers, and network equipment
Integrated Circuit Guides & Articles
CSD87313DMS Synchronous Buck Power Stage Design Guide
Design a compact CSD87313DMS synchronous buck stage with practical guidance for loss, gate drive, PCB layout, EMI, thermal validation, and sourcing.
Aug 6, 2026
STEF05SGR eFuse Selection Guide for 5 V Overcurrent Protection
Choose STEF05SGR for 5 V overcurrent protection by checking current-limit margin, inrush, thermal loss, fault response, and sourcing.
Aug 6, 2026
C0402C103K3RACTU Selection Guide: Choosing a 10 nF 0402 MLCC
Select C0402C103K3RACTU by voltage margin, X7R behavior, tolerance, 0402 assembly risk, and qualified alternatives.
Aug 4, 2026
STM32H753VIT6 MCU Selection Guide: Memory, Package, Connectivity, and Security
Choose STM32H753VIT6 by evaluating memory architecture, LQFP-100 pin fit, connectivity, security, power, and sourcing tradeoffs.
Aug 4, 2026
All Integrated Circuit Components
Showing 55,401–55,450 of 77,666
IC OPAMP GP 110KHZ 8DIP
IC LVDS SERDES RECEIVER 56-TSSOP
150-mA, capacitor-free low-dropout voltage regulator with active output discharge & enable
The UCC28C41DGKRG4 is a voltage-mode PWM switching controller from Texas Instruments, available in an 8-pin VSSOP package. It supports both voltage-mode and current-mode control, operating from a 12V to 18V input, with an integrated oscillator and adjustable duty cycle. Available in stock worldwide with fast shipping.
Current Mode PWM Controller 18V 200mA 8-Pin VSSOP T/R
Supervisory Circuits Sgl Supply Vltg Sup ror 5V Sys
1394 Interface IC One-Port Cable Xcvr/Arbiter
DC DC Cntrlr Dual-OUT PWM DC to DC Controller/Step Up/Step Down 3.6V to 50V Input 16-Pin SSOP T/R
Use the download button to access the LP5912-2.5DRVT schematic symbol, PCB footprint, and 3D model.
Precision Amplifiers LinCMOS Precision Quad Op Amp
LDO Regulator Pos 1.22V to 5.5V 0.25A/0.125A 20-Pin HTSSOP EP Tube
The SN74HC10NE4 is a triple 3-input NAND gate IC from the HC high-speed CMOS logic family, packaged in a 14-pin DIP for through-hole assembly. Operating from 2V to 6V with 50pF load capacitance and 5.2mA sink current, it provides three independent NAND gates suitable for combinational logic, glue logic, and control signal generation in consumer and industrial digital circuits.
IC REG LINEAR 3.3V/2.5V 20HTSSOP
GREEN, PLASTIC, MS-012AA, SOIC-8
Operational Amplifiers - Op Amps Adv LinCMOS RtoR Otp Wide-Inp-Vltg Dual
Audio Amplifiers 4-Ch +/-5V Audio Volume Control
The TLV2432AQDRG4Q1 is a dual general-purpose rail-to-rail input/output operational amplifier rated for automotive applications. It operates from ±5V or a single 10V supply, delivering 2.8 MHz bandwidth and 1.6 V/µs slew rate with ultralow 60 pA bias current. Available in compact 8-pin SOIC package with AEC-Q100 qualification for demanding in-vehicle environments.
The BQ2060ADBQG4 is a Smart Battery System (SBS) v1.1 compliant gas gauge IC from Texas Instruments for lithium-ion and lithium-polymer battery packs. It implements SMBus communication, provides accurate state-of-charge estimation using coulomb counting, and is housed in a 28-pin SSOP package for portable device battery management.
16-bit Microcontrollers - MCU 16-bit Ultra-Lo-Pwr Microcontroller
Power Management Specialized - PMIC
The UCC2541PWPRG4 is a synchronous step-down DC-DC switching controller from Texas Instruments using voltage-mode PWM control with an 8.5V to 35V input range. It supports single-output designs and also allows average current mode operation for enhanced control flexibility. Available in a 20-pin HTSSOP package with worldwide shipping from stock.
Bus Transceivers 20-Bit Bus Trnscvrs With 3-State Outputs
Bus XCVR Dual 16-CH 3-ST 48-Pin SSOP T/R
OR Gate 1-Element 2-IN CMOS 5-Pin SC-70 T/R
3A Dual Channel Synchronous Step-Down Switcher with Integrated FET
DC DC Cntrlr Single-OUT Sync Step Down 2.7V to 35V Input 20-Pin HTSSOP EP Tube
The LME49740MA is a quad audio operational amplifier from Texas Instruments, designed for high-fidelity audio applications with 120 dB typical CMRR and 700 µV maximum input offset voltage. It operates from ±2.5 V to ±17 V dual supply and is packaged in a 14-pin SOIC for compact audio circuit integration.
150mA Low-Dropout (LDO) Regulator With Foldback Current Limit for Portable Devices
Low Dropout Regulators(LDO) positive Fixed 220mV @ 50mA 16V 5V 50mA SOT-23-5 RoHS
Texas Instruments CD74HC14MT is a high-speed CMOS hex Schmitt-triggered inverter in a 14-pin SOIC package, offering 6 independent inverting channels with hysteresis for noise-immune signal conditioning. It operates with a 50 pF load capacitance rating and 5.2 mA maximum IOL output drive current within the HC/UH logic family. Available in tape-and-reel packaging for automated assembly with worldwide shipping.
150mA Low-Dropout (LDO) Regulator With Foldback Current Limit for Portable Devices
The TMS320C6455BGTZA is a high-performance 32-bit fixed-point digital signal processor from Texas Instruments operating up to 1000MHz clock frequency. It features a 32-bit external data bus, integrated cache, and boundary scan support in a BGA package. Available from stock worldwide with competitive pricing for demanding DSP applications.
Automotive 2 mT, 5.5 V hall effect latch
Use the download button to access the DAC5675IPHP schematic symbol, PCB footprint, and 3D model.
The DAC5675IPHPG4 is a Texas Instruments 14-bit, 400 MSPS high-speed digital-to-analog converter in a 48-pin HTQFP package with parallel word input. It delivers an analog output voltage range of 2.15 V to 3.9 V and maximum linearity error of 0.0244%. Available in stock with worldwide shipping.
The DRV5015A3EDBZRQ1 is an automotive-grade Hall effect latch IC from Texas Instruments, rated for AEC-Q100 compliance. It detects magnetic fields with a sensitivity of ±1.8 mT and operates from 2.5 V to 5.5 V supply. Available in SOT-23 package, it is ideal for automotive position sensing and speed detection applications.
Digital Signal Processors & Controllers - DSP, DSC Fixed-Point DSP
IC REG CTRLR BUCK 20HTSSOP
The TLV2731IDBVT is a single rail-to-rail low-power LinCMOS operational amplifier from Texas Instruments with 0.00006 µA typical bias current, 60 dB minimum CMRR, and 3 mV maximum input offset voltage. In a 5-pin SOT-23 package, it suits portable, battery-powered, and precision low-power analog signal conditioning.
The LM748CJ is a general-purpose voltage-feedback operational amplifier from Texas Instruments with externally compensated frequency response. It features 70 dB minimum CMRR, 0.5 µA input bias current, 5 mV maximum offset voltage, and is packaged in an 8-pin ceramic DIP for audio, instrumentation, and control system applications.
Bus-Polarity Correcting RS-485 Transceiver with IEC-ESD Protection
DC DC Cntrlr Single-OUT Sync Step Down 2.25V to 5.5V Input 8-Pin VSON EP T/R
Quad 2.7-V High-Slew-Rate Rail-to-Rail Output Operational Amplifier
The SN74ACT241NSR is an octal buffer and line driver IC with 3-state outputs from Texas Instruments, featuring one output-enable active-high and one active-low control. It operates at 5 V supply with ACT logic family speed, delivering 24 mA sink current in a 20-pin small-outline package.
Driver 3A 2-OUT Hi/Lo Side Full Brdg/Half Brdg Non-Inv 8-Pin HSOP EP T/R
Dual J-K flip-flop from Texas Instruments in the HCT logic family, operating at up to 20MHz with 50pF load capacitance. Provides two independent J-K flip-flop functions in a 14-pin DIP package for through-hole PCB assembly. Available in lead-free version with worldwide shipping for digital logic designs.
Texas Instruments BQ2050HSN-A508, Battery Fuel Gauge IC Lithium-Ion, 4.25 V, 16-Pin, SOIC
Use the download button to access the TVS3301DRBR schematic symbol, PCB footprint, and 3D model.
Bus Transceivers 16-Bit Bus Trnscvr With 3-State Outputs
SOP-16
Need Integrated Circuit Components?
Get competitive quotes from authorized China distributors
Request a Quote