Integrated Circuit
Integrated Circuit components are essential building blocks in modern electronic systems. FindMyChip sources Integrated Circuit ICs from authorized China distributors with competitive pricing and reliable stock.
77,666 components
How to Choose Integrated Circuit Components
- 1Verify electrical specifications (voltage, current, frequency) match your design requirements.
- 2Check package footprint and thermal characteristics against your PCB layout constraints.
- 3Confirm lifecycle status and long-term availability for production designs.
Popular Applications
Consumer Electronics
Smartphones, tablets, and smart home devices
Industrial Systems
Factory automation, control systems, and monitoring
Automotive
In-vehicle electronics and advanced driver assistance
Telecommunications
Base stations, routers, and network equipment
Integrated Circuit Guides & Articles
CSD87313DMS Synchronous Buck Power Stage Design Guide
Design a compact CSD87313DMS synchronous buck stage with practical guidance for loss, gate drive, PCB layout, EMI, thermal validation, and sourcing.
Aug 6, 2026
STEF05SGR eFuse Selection Guide for 5 V Overcurrent Protection
Choose STEF05SGR for 5 V overcurrent protection by checking current-limit margin, inrush, thermal loss, fault response, and sourcing.
Aug 6, 2026
C0402C103K3RACTU Selection Guide: Choosing a 10 nF 0402 MLCC
Select C0402C103K3RACTU by voltage margin, X7R behavior, tolerance, 0402 assembly risk, and qualified alternatives.
Aug 4, 2026
STM32H753VIT6 MCU Selection Guide: Memory, Package, Connectivity, and Security
Choose STM32H753VIT6 by evaluating memory architecture, LQFP-100 pin fit, connectivity, security, power, and sourcing tradeoffs.
Aug 4, 2026
All Integrated Circuit Components
Showing 53,601–53,650 of 77,666
3-V To 5.5-V Multichannel RS-232 Line Driver/Receiver
The SN74LVC574ANSR is an octal edge-triggered D-type flip-flop with 3-state outputs from Texas Instruments in a 20-pin SOIC package. It operates up to 150 MHz at 1.65V to 3.3V supply with 50pF load capacitance. Available from stock with worldwide shipping.
SOP, SOP16,.25
Octal Edge-Triggered D-Type Flip-Flops with 3-State Outputs
Use the download button to access the SN65472DEP schematic symbol, PCB footprint, and 3D model.
4.2-V to 60-V, 0.6-A ultra-small synchronous step-down converter
Octal Buffers/Line Drivers with 3-State Outputs and Series Damping Resistors
16-bit fixed point DSP with Flash
1.2V / 300mA Step-Down Converter in 2x2mm SON/TSOT23 Package
24MHz 105C ULP Microcontroller With 32 KB FRAM, 4 KB SRAM, 44 IO, 12-bit ADC
TPS7A1012PDSER is an ultra-low-dropout (LDO) linear regulator delivering 300 mA with a typical dropout voltage of only 70 mV at full load, operating from 1.7 V to 3.3 V input in a 6-pin SOT-23 (SON) package. Its fixed output voltage and extremely low quiescent current make it ideal for battery-powered IoT devices and portable electronics. Suited for always-on power rails in wearables, wireless sensors, and precision analog circuits requiring clean, stable supply voltage.
MSP430FR5858 16 MHz Ultra-Low-Power Microcontroller featuring 48 KB FRAM, 2 KB SRAM, 33 IO
High Speed CMOS Logic Dual 4-Input Multiplexers
Precision micropower shunt voltage reference
16-bit Ultra-Low-Power Microcontroller, 1kB Flash, 128B RAM, Comparator
High Speed CMOS Logic 4-Bit Binary Counter with Synchronous Reset
16-bit Ultra-Low-Power Microcontroller, 4kB Flash, 256B RAM, Comparator
Texas Instruments CD74HC365M96 is a high-speed CMOS hex non-inverting buffer and line driver with 3-state outputs, dual active-low output enable, 50 pF load capacitance, in a 16-pin SOIC package. From $0.40 in stock worldwide shipping.
CD74ACT163E is a 4-bit synchronous binary counter by Texas Instruments in the ACT logic family, housed in a 16-pin DIP package. Key specs: synchronous clear and load, terminal-count output, 5 V supply with TTL-compatible inputs, and 50 pF load capacitance rating. In stock with worldwide shipping.
The CD74AC161E is a synchronous presettable 4-bit binary counter with asynchronous reset in AC-family CMOS logic, operating from 3 V to 5.5 V with propagation delays as low as 5.5 ns. It includes a Terminal Count Output for cascading multiple stages and comes in a 16-pin PDIP package for through-hole applications. Available from major distributors with worldwide shipping.
Texas Instruments CD74AC139M is a dual 2-line to 4-line decoder/demultiplexer in a 16-pin SOIC package. It belongs to the AC logic family, operates with 50 pF load capacitance, and sinks up to 24 mA per output. Available from stock with worldwide shipping.
PADS125H02IRHBR is a Texas Instruments 24-bit, 40 kSPS, 2-channel delta-sigma ADC with ±20 V input range, integrated PGA, IDACs, GPIOs, and voltage reference in a 32-pin QFN. Available in stock with competitive pricing and worldwide shipping.
Use the download button to access the TPS2045ADR schematic symbol, PCB footprint, and 3D model.
3-13V Single Hot-Swap IC w/ Power Good Report, Act-Low Enable
Use the download button to access the TPS2211IDB schematic symbol, PCB footprint, and 3D model.
200mA Low-Iq Low-Dropout (LDO) Regulator for Portables
8-bit shift register
Dual-Processor Supervisory Circuit with Power-Fail and Watchdog Timer
Low-Power Stereo Voice Band CODEC
High-Output RS-485 Transceiver
Synchronous 8-Bit Up/Down Binary Counters
High Speed CMOS Logic 8-Input Multiplexer/Register with 3-State Outputs
16-Bit Bus Transceivers with 3-State Outputs
2.7V-to-5.5V 16-Bit 1MSPS Serial Analog-to-Digital Converter (ADC)
Single 2-Input Positive-NOR Gate
Low-Power 150-mA Low-Dropout Linear Regulators for Automotive
Texas Instruments POPA2990IPWR is a 1 MHz rail-to-rail input/output op amp with 40 V supply, 115 dB CMRR, 1750 µV max offset voltage, and current-feedback architecture in SO-8. Available from stock with worldwide shipping.
The PADC12DJ5200RFAAV is a 12-bit dual 5.2-GSPS or single 10.4-GSPS RF-sampling ADC from Texas Instruments. It features wide bandwidth and high dynamic range for direct RF digitization. Available in 144-ball BGA package with worldwide shipping.
XOPA462IDDA is a Texas Instruments 180 V high-voltage operational amplifier with 6.5 MHz bandwidth, 25 V/µs slew rate, and 116 dB CMRR in an SOIC-8 package. It uses a current-feedback architecture and operates unity-gain stable. Available from stock with worldwide shipping.
ISO7761QDBQQ1 is a 6-channel digital isolator rated for automotive applications by Texas Instruments. Key specs: 6 isolated channels, 100 Mbps data rate, 2.25 V to 5.5 V supply, SOIC-16 package meeting AEC-Q100 Grade 1. From $2.50, in stock with worldwide shipping.
2048 x 18 Synchronous FIFO Memory
Automotive 60-V, 5-µA IQ, 100-mA low-dropout (LDO) voltage regulator with enable and power good
Voltage output high-side measurement current shunt monitor
Texas Instruments XCC2652RBRGZR is a SimpleLink crystal-less BAW wireless microcontroller supporting multi-standard sub-1 GHz and 2.4 GHz protocols with an 8-bit core, 31 I/O lines, on-chip ADC, DMA, and PWM channels. The crystal-less BAW resonator eliminates external crystal components, reducing BOM cost and PCB area. Packaged in a 48-pin QFN, it targets IoT edge nodes, smart home devices, and industrial wireless sensor networks.
1-MHz, Low-power operational amplifier for cost-sensitive automotive systems
Texas Instruments PTPS3840PL25DBVR is a nanopower high-input voltage supervisor with manual reset and programmable-reset time delay, featuring ultra-low quiescent current and 2.5V threshold in a compact SOT-23-5 package. Available from stock with worldwide shipping.
The Texas Instruments PTLV9054IPWR is a high-performance rail-to-rail input/output operational amplifier with 5MHz bandwidth and 15V/µs slew rate. It features a minimum CMRR of 62dB and ultra-low bias current of 5pA at 25°C in a small outline package. Available from stock worldwide with competitive pricing.
MUX36xxx 36-V, Low-Capacitance, Low-Leakage-Current, Precision, Analog Multiplexers
The UC29432D is a precision analog controller IC from Texas Instruments, designed for accurate control in power supply and signal conditioning applications. It provides a single-channel analog control function in a compact 8-pin SOIC package. Available in tape and reel format with worldwide shipping.
The UC2854ADWTR is an enhanced high power factor preregulator IC from Texas Instruments that implements average current-mode PWM control to achieve near-unity power factor correction in AC-DC power supplies, operating from 10-20V bias in a 16-pin SOIC package. It provides integrated boost PFC control with multiplier, error amplifier, and gate drive functions. Available in tape-and-reel from authorized distributors with worldwide shipping.
Need Integrated Circuit Components?
Get competitive quotes from authorized China distributors
Request a Quote