Integrated Circuit
Integrated Circuit components are essential building blocks in modern electronic systems. FindMyChip sources Integrated Circuit ICs from authorized China distributors with competitive pricing and reliable stock.
77,666 components
How to Choose Integrated Circuit Components
- 1Verify electrical specifications (voltage, current, frequency) match your design requirements.
- 2Check package footprint and thermal characteristics against your PCB layout constraints.
- 3Confirm lifecycle status and long-term availability for production designs.
Popular Applications
Consumer Electronics
Smartphones, tablets, and smart home devices
Industrial Systems
Factory automation, control systems, and monitoring
Automotive
In-vehicle electronics and advanced driver assistance
Telecommunications
Base stations, routers, and network equipment
Integrated Circuit Guides & Articles
CSD87313DMS Synchronous Buck Power Stage Design Guide
Design a compact CSD87313DMS synchronous buck stage with practical guidance for loss, gate drive, PCB layout, EMI, thermal validation, and sourcing.
Aug 6, 2026
STEF05SGR eFuse Selection Guide for 5 V Overcurrent Protection
Choose STEF05SGR for 5 V overcurrent protection by checking current-limit margin, inrush, thermal loss, fault response, and sourcing.
Aug 6, 2026
C0402C103K3RACTU Selection Guide: Choosing a 10 nF 0402 MLCC
Select C0402C103K3RACTU by voltage margin, X7R behavior, tolerance, 0402 assembly risk, and qualified alternatives.
Aug 4, 2026
STM32H753VIT6 MCU Selection Guide: Memory, Package, Connectivity, and Security
Choose STM32H753VIT6 by evaluating memory architecture, LQFP-100 pin fit, connectivity, security, power, and sourcing tradeoffs.
Aug 4, 2026
All Integrated Circuit Components
Showing 50,351–50,400 of 77,666
Operational Amplifiers - Op Amps 40-V, dual 3.5MHz, RRO, MUX-friendly operational amplifier for cost-sensitive systems 8-TSSOP -40 to 125
Texas Instruments PTLV9352IPWR is a dual rail-to-rail output operational amplifier with 40 V supply range, 3.5 MHz bandwidth, and MUX-friendly input architecture in an 8-pin SOIC package. It delivers 95 dB minimum CMRR and 2000 µV maximum input offset for cost-sensitive signal conditioning. Ideal for multiplexed ADC front-ends and sensor signal chains in industrial and consumer designs.
ADS8515IDBG4 is a 16-bit successive approximation parallel ADC by Texas Instruments in a 28-pin SSOP package. Key specs: ±10V bipolar input range, 4µs max conversion time, 0.0046% max linearity error. From $15.00, in stock with worldwide shipping.
Analog Front End - AFE 12 Bit 21 MSPS Ult Lo-Pwr Sig Processor
PAMC1300BQDWVRQ1 is an AEC-Q100 automotive reinforced isolated amplifier with ±250 mV differential input, 5000 V isolation, 310 kHz bandwidth, and 0.03% non-linearity in an 8-pin SOIC package for high-accuracy current sensing.
The NS16C2752TVS/NOPB is a dual UART with 64-byte FIFOs and up to 5 Mbit/s data rate from Texas Instruments. It features an 8-bit external data bus, 24 MHz clock, and operates from both 3.3V and 5V supplies in a 48-pin LQFP package. Available from stock with worldwide shipping.
TEXAS INSTRUMENTS - THS1403QPHP - Analogue to Digital Converter, 14 bit, 3 MSPS, Differential, Parallel, Single, 3 V
3.3 V or 2.80 V or Adjustable • Cellular and Smart Phones • 1.6-A, 1.0-A, or 0.8-A, up to
40-V, dual 3.5MHz, RRO, MUX-friendly operational amplifier for cost-sensitive systems
The PDRV8706HRHBQ1 is a 37V automotive H-bridge smart gate driver with inline current sense amplifier from Texas Instruments. It features push-pull output, complementary output polarity, and a standard input interface in a 32-pin QFN package. Available from stock worldwide with competitive pricing for automotive motor control applications.
Processor supervisor with power fail and integrated watchdog timer
LDO Voltage Regulators 200-mA, nanopower-IQ (25 nA), low-dropout (LDO) voltage regulator with enable 5-SOT-23 -40 to 125
QFN-32
Use the download button to access the TPSM82822SILR schematic symbol, PCB footprint, and 3D model.
Switching Controllers 2.5-V to 24-V, 3-, 2-, and 1-phase step-down driverless controller 32-VQFN -40 to 125
IC SCAN TEST DEVICE 18BIT 64LQFP
Use the download button to access the TL16C550DIRHBR schematic symbol, PCB footprint, and 3D model.
TEXAS INSTRUMENTS - OPA2211AIDDA . - Operational Amplifier, Dual, 2 Amplifier, 45 MHz, 27 V/µs, ± 2.25V to ± 18V, SOIC, 8 Pins
Texas Instruments DRV8814PWP, Brushed Motor Driver IC, 45 V 1.7A 28-Pin, HTSSOP
DRV83053EPHPRQ1 is an AEC-Q100 qualified three-phase brushless motor gate driver IC designed for automotive applications. It integrates three high- and low-side gate drivers supporting external N-channel MOSFETs with adjustable gate drive current. Available from authorized distributors with worldwide shipping.
TPA6211TDGNRQ1 is an automotive-grade mono class-AB audio amplifier delivering 3.1 W into an 8-ohm load from a single analog input, operating over -40°C to 105°C temperature range in an 8-pin HVSSOP package. It provides 20 kHz audio bandwidth and 105 dB noise figure, suitable for in-vehicle infotainment speakers, navigation audio, and automotive human-machine interface sound output.
TEXAS INSTRUMENTS - TPS542951PWP . - DC/DC Switching Regulator, Synchronous, Dual, 4.5 V to 18 V in, 7 V/2 A out, 700 kHz, HTSSOP-16
LP3907QTLX-VXSS/NOPB is a quad-output PMIC combining synchronous buck converters and LDOs in a 25-ball BGA package. It operates from 2.8 V to 5.5 V input with PWM/PFM dual-mode control for high efficiency. Available from stock with worldwide shipping.
Texas Instruments DS90UB913A-Q1 is an automotive-grade FPD-Link III serializer supporting 10-bit and 12-bit parallel video at 25 MHz to 100 MHz pixel clocks. It transmits video and control data over a single coax or STP cable. Available from stock with worldwide shipping.
TXB0108EPWR is an 8-bit bidirectional voltage-level translator from Texas Instruments with automatic direction sensing, supporting VCCA from 1.2 V to 3.6 V and VCCB from 1.65 V to 5.5 V with ±15 kV ESD protection, packaged in a 20-pin TSSOP for mixed-voltage interface designs.
XTPS563202DRLR is a 3 A synchronous buck converter from Texas Instruments with a 4.5 V to 17 V input range using voltage-mode PWM control, housed in a miniature SOT563 6-pin package for ultra-compact power regulation in portable and IoT applications.
Use the download button to access the SN74HCS21QPWRQ1 schematic symbol, PCB footprint, and 3D model.
Use the download button to access the SN74HCS21PWR schematic symbol, PCB footprint, and 3D model.
TEXAS INSTRUMENTS - TPS70145PWP - LDO Voltage Regulator IC, Fixed, 2 Output, 2.7 V to 6 V in, 170 mV drop, 0.5 A out, HTSSOP-20
Power Management Specialised - PMIC Prog Wide Input Volt Pwr Mngt IC
Use the download button to access the SN74HCS21QDRQ1 schematic symbol, PCB footprint, and 3D model.
LDO Voltage Regulators 200-mA, nanopower-IQ (25 nA), low-dropout (LDO) voltage regulator with enable 5-SOT-23 -40 to 125
XCM6340QRTVRQ1 is an automotive-grade 4-channel 32-bit delta-sigma audio ADC from Texas Instruments with integrated microphone bias, input diagnostics, and up to 14.2 V analog input range, in a 32-pin QFN package. It targets in-vehicle audio capture, voice recognition, and hands-free communication systems requiring AEC-Q100 qualification.
LDO Voltage Regulators 200-mA, nanopower-IQ (25 nA), low-dropout (LDO) voltage regulator with enable 5-SOT-23 -40 to 125
DIP-20
IC GATE DRVR LOW-SIDE 8SOIC
POPA2189IDGKR is a dual 14 MHz zero-drift CMOS precision op-amp from Texas Instruments in an MSOP-8 package. Features 8 µV max offset voltage, 120 dB CMRR, and rail-to-rail output. Available worldwide with fast shipping.
Fixed voltage, 0.5%, 50-ppm/°C precision micropower shunt voltage reference
Use the download button to access the OPA862IDR schematic symbol, PCB footprint, and 3D model.
The CD74HC541EG4 is an 8-bit non-inverting octal buffer and line driver with 3-state outputs in a 20-pin DIP package, operating from 2 V to 6 V. It provides two active-low output enable pins and 25 mA output drive, suitable for CMOS bus buffering and address line driving in 5 V logic systems.
AEC-Q100, 4-Channel, 10-MHz, low-noise, RRIO, CMOS op amp
IC FF D-TYPE SNGL 8BIT 20SOIC
V62/06606-01XE is a Texas Instruments integrated circuit for industrial electronics. It offers 2 pins, supporting reliable assembly in compact electronic equipment. From quote-based pricing, request stock for worldwide shipping.
High Speed Operational Amplifiers 12.6V, Low-noise, single-ended-to-differential, high input impedance amplifier 8-SOIC -40 to 125
IC FF D-TYPE DUAL 9BIT 56SSOP
Use the download button to access the LMR36510ADDAR schematic symbol, PCB footprint, and 3D model.
SN75C1406 is a low-power RS-232 line receiver and driver combination with 3 drivers, operating from a 4.5 V to 15 V supply. It provides EIA-232-compatible output levels with reduced power consumption compared to standard RS-232 transceivers, supporting serial communication interfaces. Packaged in a 16-pin DIP for through-hole serial port designs in embedded and industrial equipment.
IC 20BIT BUS-INTRFC D 56-SSOP
IC BUF NON-INVERT 5.5V 56SSOP
Battery Management 3-Series to 5-Series Stackable Ultra-Low-Power Primary Protector With Autonomous Cell Balancing 24-TSSOP -40 to 85
Need Integrated Circuit Components?
Get competitive quotes from authorized China distributors
Request a Quote