Integrated Circuit

30V, 0.2A high Performance 500KHz current mode PWM with 8.4V/7.6V UVLO, 100% duty cycle, -40C to 85C

The PTMUX1308QPWRQ1 is an automotive-grade single-channel 8:1 general-purpose analog multiplexer from Texas Instruments with 1.8 V logic control. It supports up to 500 MHz bandwidth, 5.5 V input voltage, and 100 dB off-state isolation in a 16-pin SOIC package. Available from stock with worldwide shipping.

PTMUX1308QDYYRQ1 is a 1-channel, 8:1 general-purpose analog multiplexer from Texas Instruments with 1.8-V logic control, 500 MHz bandwidth, and 5.5 V maximum input. Available in a 16-pin SOIC package with AEC-Q100 automotive qualification for reliable worldwide shipping.

Ethernet ICs Low latency 10/100-Mbps PHY with MII interface and enhanced mode 32-VQFN -40 to 105

SAR ADC, Dual, 750 kSPS, 12 Bit, Simultaneous Sampling

The PTLV6742IDSGR is a dual 10 MHz, low-noise, rail-to-rail output operational amplifier from Texas Instruments with 110 dB typical CMRR. It features a 1000 µV maximum input offset voltage and low-bias architecture in an 8-pin SON package. Available from stock with worldwide shipping.

PTLV9152IDR is a dual rail-to-rail input/output operational amplifier with 4.5 MHz gain-bandwidth, 16 V supply range, 125 dB typical CMRR, and a maximum input offset voltage of 720 µV. The device operates in a low-profile 8-pin SOIC package and targets precision signal conditioning in industrial and consumer applications.

Operational Amplifiers - Op Amps

The XF280025CPMS is a Texas Instruments C2000 32-bit microcontroller from the TMS320 family with 128 KB Flash, FPU, TMU, and CLB programmable logic. It runs at up to 100 MHz and integrates ADC, DAC, and DMA for real-time control applications. Available in a QFP package with worldwide shipping.

Use the download button to access the TLV4011DCKR schematic symbol, PCB footprint, and 3D model.

LDO Voltage Regulators 2-A, low-VIN (1.1-V), low-noise, high-accuracy, ultra-low-dropout (LDO) voltage regulator 12-VQFN-HR -40 to 125

TPS76725QPWPR is a 1 A fixed-output LDO linear voltage regulator with fast-transient response, 230 mV typical dropout voltage, and 2.7 V to 10 V input range. Automotive-qualified in TSSOP-20 package for power-sensitive MCU and DSP supply rails.

Octal Buffers And Line Drivers With 3-State Outputs

Texas Instruments XF280025CPNS is a C2000 32-bit real-time microcontroller with a 100 MHz floating-point unit, trigonometric math unit, 128 KB Flash, and configurable logic block in a QFP package. It integrates high-resolution ADC, DAC, DMA, and JTAG boundary scan for demanding digital power and motor control designs. Available from stock worldwide with fast shipping.

LDO Voltage Regulators 200-mA, nanopower-IQ (200 nA), low-dropout (LDO) voltage regulator with enable 5-SOT-23 -40 to 125

OPA207IDBVT is a low-power, high-precision bipolar rail-to-rail output op-amp with 7.5 nV/√Hz voltage noise, 100 µV maximum offset, 0.2 µV/°C drift, and 350 µA quiescent current, in a 5-pin SOT-23 package for precision instrumentation and portable sensor signal conditioning.

V62/03672-02YE is a military-grade quad voltage comparator from Texas Instruments, equivalent to the LM239A-EP enhanced-plastic device, featuring 4 independent comparator channels with open-collector outputs. It operates from a single 2 V to 36 V supply or a dual ±1 V to ±18 V supply, with an input offset voltage of up to 2500 µV and a maximum bias current of 0.4 µA. Housed in a 14-pin SOIC package, it suits defense, aerospace, and high-reliability industrial threshold-detection circuits.

LDO Voltage Regulators 200-mA, nanopower-IQ (25 nA), low-dropout (LDO) voltage regulator with enable 5-SOT-23 -40 to 125

IC REG CTRLR PUSH-PULL 8SOIC

Use the download button to access the ISO7741BDWR schematic symbol, PCB footprint, and 3D model.

LDO Voltage Regulators 200-mA, low-dropout voltage regulator with low-IQ & enable 6-WSON -40 to 125

TEXAS INSTRUMENTS - SN74S04N . - Inverter, 74S04, 1 Input, 20 mA, 4.75 V to 5.25 V, DIP-14

LDO Voltage Regulators 250-mA, low-noise, high-PSRR, low-IQ, ultra-low-dropout voltage regulator with low-IQ & enable 4-DSBGA -40 to 125

V62/03642-01XE is a configurable single-gate logic IC from the Texas Instruments LVC family, equivalent to the SN74LVC1G97-EP, in a 6-pin SOT-23 package. It operates from 1.65 V to 5.5 V with 32 mA output sink current and 50 pF load capacitance per output. Suited for space-constrained logic glue, level shifting, and signal conditioning in military and industrial electronics.

Texas Instruments SN74LV8153PW 8-stage Serial-to-Parallel Interface, Serial to Parallel, 20-Pin TSSOP

Specialty Function Logic Emb Test-Bus Cntrl w/8-Bit Id Buses

Use the download button to access the UCC2913DG4 schematic symbol, PCB footprint, and 3D model.

IC PHASE LOCK LOOP HP 14-TSSOP

V62/04734-02XE is a single 2-input OR gate from Texas Instruments in the LVC/LCX logic family, housed in a compact 5-pin SOT-23 package with 32 mA output sink current and 50 pF load capacitance rating. It suits glue logic, signal routing, and low-voltage digital control applications in space-constrained 3.3 V or 5 V boards.

The V62/04620-01YE is a military-grade ACT-family octal bus driver with 3-state outputs in a 20-pin SOIC package, featuring active-low enable control and unidirectional signal flow. It operates at 4.5 V to 5.5 V, provides 24 mA output drive, and is qualified for high-reliability defense and aerospace applications.

V62/04669-02XE is a 14 pins integrated circuit by Texas Instruments. Key specs: 14 pins, Small Outline Packages package, V62/04669-02XE. From quote-based sourcing, in stock checks support worldwide shipping.

Supervisory Circuits Pwr Supply Sequencer & Monitor

Registers 4-By-4 Register Files With Open-Collector Outputs 16-PDIP 0 to 70

UCCx81xA BiCMOS Power Factor Preregulat

The V62/03670-02XE is a 6-function IEEE 1394 differential line transceiver with 6-bit driver width and differential input characteristics, housed in an 80-pin PQFP package for high-speed serial bus interface applications.

ARM Microcontrollers - MCU Tiva C Series Microcontroller

V62/03631-08XE is a fixed-output low-dropout linear regulator from Texas Instruments in a 20-pin PWP package, supporting 2.7 V to 10 V input range with only 169 mV dropout for efficient power delivery.

V62/03624-05XE is a current-mode PWM switching controller supporting boost and flyback topologies, with an input voltage range of 9 V to 12.5 V and pulse-width modulation control. Packaged in SOIC-8, it targets regulated DC-DC converter designs in aerospace and high-reliability applications.

ARM Microcontrollers - MCU IC ARM Cortex-M3 MCU 96K Ind Temp

Low power current mode push-pull PWM with discharge transistor, 12.5/8.3V UVLO, 0°C to 70°C

110-V active clamp current mode PWM controller with N-channel clamp FET and 0.75V CS threshold

Switching Controllers Current Mode PWM Controller 8-CDIP -55 to 125

V62/03610-01XE is a 32-bit floating-point digital signal processor from Texas Instruments in a 144-pin PQFP package, operating at up to 100 MHz with a 24-bit address bus and 32-bit external data bus. It features hardware barrel shifter, boundary scan, and requires an additional 3.3 V supply, targeting high-performance signal processing in aerospace and defense applications.

TXB0102 2-Bit Bidirectional Voltage-Level Translator With Auto Direction Sensing and ±15-kV ESD Protection

Supervisory Circuits Pwr Supply Sequencer & Monitor

Economy low power BICMOS 1MHz current mode PWM with 9.4V/7.4V UVLO and 50% duty cycle, 0C to 70C

12-Rail Power Supply Sequencer and Monitor with ACPI Support

Low-Power BiCMOS Current-Mode PWM

Switching Controllers Low-Pwr Current-Mode Push-Pull PWM

100-μA typical starting supply current • 500-μA t