Integrated Circuit
Integrated Circuit components are essential building blocks in modern electronic systems. FindMyChip sources Integrated Circuit ICs from authorized China distributors with competitive pricing and reliable stock.
77,666 components
How to Choose Integrated Circuit Components
- 1Verify electrical specifications (voltage, current, frequency) match your design requirements.
- 2Check package footprint and thermal characteristics against your PCB layout constraints.
- 3Confirm lifecycle status and long-term availability for production designs.
Popular Applications
Consumer Electronics
Smartphones, tablets, and smart home devices
Industrial Systems
Factory automation, control systems, and monitoring
Automotive
In-vehicle electronics and advanced driver assistance
Telecommunications
Base stations, routers, and network equipment
Integrated Circuit Guides & Articles
CSD87313DMS Synchronous Buck Power Stage Design Guide
Design a compact CSD87313DMS synchronous buck stage with practical guidance for loss, gate drive, PCB layout, EMI, thermal validation, and sourcing.
Aug 6, 2026
STEF05SGR eFuse Selection Guide for 5 V Overcurrent Protection
Choose STEF05SGR for 5 V overcurrent protection by checking current-limit margin, inrush, thermal loss, fault response, and sourcing.
Aug 6, 2026
C0402C103K3RACTU Selection Guide: Choosing a 10 nF 0402 MLCC
Select C0402C103K3RACTU by voltage margin, X7R behavior, tolerance, 0402 assembly risk, and qualified alternatives.
Aug 4, 2026
STM32H753VIT6 MCU Selection Guide: Memory, Package, Connectivity, and Security
Choose STM32H753VIT6 by evaluating memory architecture, LQFP-100 pin fit, connectivity, security, power, and sourcing tradeoffs.
Aug 4, 2026
All Integrated Circuit Components
Showing 50,301–50,350 of 77,666
LOW COST ENET PHY INDUSTRIAL
The DAC7800KPG4 is a 12-bit serial-input digital-to-analog converter from Texas Instruments with binary input code and 0.0244% maximum linearity error in a 16-pin DIP package. It offers precision voltage output for control and signal generation tasks. Available in stock with worldwide shipping.
Switching Controllers Current-Mode PWM Controller
Board Mount Temperature Sensors
UART Interface IC 1.8V to 5V Dual UART
Switching Controllers Current-Mode PWM Controller
Texas Instruments LM4873MTEX/NOPB is a dual-channel audio amplifier IC with 20 kHz bandwidth, 1% THD, and 97 dB SNR in a 20-pin SOIC package. Designed for stereo speaker amplification in portable consumer electronics.
Equalisers 4-channel 16-Gbps linear redriver 40-WQFN 0 to 70
V62/06675-01XE is a military-enhanced LinCMOS dual differential comparator with open-drain outputs, 0.03 nA bias current, and 5 mV input offset voltage in an 8-pin SOIC package. It is a MIL-PRF-38535 compliant device operating over a full -55 °C to +125 °C military temperature range. Available from stock with worldwide shipping.
The Texas Instruments DAC1232LCN is a 12-bit digital-to-analog converter with parallel 8-bit input interface and 0.05% maximum linearity error. It features binary input coding and single-function conversion in a 20-pin DIP package. Available from stock with worldwide shipping.
The DAC1232LCJ is a 12-bit digital-to-analog converter with parallel 8-bit binary input interface housed in a 20-pin ceramic DIP package. It provides 0.05% maximum linearity error for precision signal generation. Available from stock with worldwide shipping.
The DAC1232LIN/NOPB is a Texas Instruments 12-bit digital-to-analog converter in a 20-pin DIP package, offering microprocessor-compatible parallel interface with double-buffered input registers and 5 V to 15 V supply range. Available in stock worldwide.
BQ7961x-Q1 Family of 12S, 14S, 16S Precision Automotive Battery Monitor, Balancer and Integrated Hardware Protector with up to SafeTITM-26262 ASIL-D Compliance
Texas Instruments DAC1232LCJ-1/NOPB is a 12-bit digital-to-analog converter with double-buffered latch interface, operating from a single 5V supply and compatible with microprocessor data buses. Provides 12-bit resolution with 1 LSB integral linearity, housed in a ceramic DIP package for reliable operation in legacy industrial systems. RoHS-compliant and available globally for instrumentation and control applications.
The DAC1232LIN is a 12-bit digital-to-analog converter from Texas Instruments featuring parallel 8-bit binary input format in a 20-pin DIP package. It offers 0.05% maximum linearity error for high-precision signal conversion. Available from stock with worldwide shipping.
The TPS3808 family of microprocessor supervisory circuits monitors system voltages from 0.4 V to 5 V, asserting an open-drain RESET signal when the SENSE voltage drops below a preset threshold or when the manual reset ( MR)
The PTLV840NADL29DBVR is a single-channel low-voltage supervisor IC from Texas Instruments with programmable reset time delay. It features an adjustable reset threshold and fits a compact 5-pin SOT-23 package for space-constrained designs. Available from stock with worldwide shipping.
TEXAS INSTRUMENTS - DRV8885PWPR . - Motor Driver, Stepper, 8V to 37V supply, 1A/1 Output, HTSSOP-24
TEXAS INSTRUMENTS - THS7303PWG4 - Video Amplifier, 3 Amplifiers, 35 MHz, 320 V/µs, -40 °C, 85 °C, 70 mA
200-mA, high-PSRR, low-IQ, low-dropout voltage regulator with low-noise & enable
Use the download button to access the TPS76533DR schematic symbol, PCB footprint, and 3D model.
Switching Voltage Regulators Hi Temp 17V,1.5A,Syn Step-Down Converter
TEXAS INSTRUMENTS - OPA2322AIDRGT - Operational Amplifier, Dual, 2 Amplifier, 20 MHz, 10 V/µs, 1.8V to 5.5V, SON, 8 Pins
IC FF D-TYPE DUAL 8BIT 48TSSOP
16-bit Microcontrollers - MCU Ultra low power MCU
V62/07615-01XE is a current-mode PWM switching controller from Texas Instruments in an 8-pin SOIC package. It operates from a 12 V to 18 V input with 15 V nominal for industrial and mil-grade power conversion applications. Available Pb-free with 15-year YTEOL in stock worldwide for long-lifecycle embedded and defense power supply designs.
TEXAS INSTRUMENTS - UC3854BN - PFC Controller IC, 10 V to 20 V & 12 mA Supply, 10 V Lockout, 95 % Duty Cycle, 200 kHz, DIP-16
16-bit Microcontrollers - MCU Ultrasonic Sensing MCU with 256KB FRAM, 8KB RAM, LCD for water meters 100-LQFP -40 to 85
IC CODEC 16BIT DUAL PROG 48-TQFP
IC CODEC 16BIT DUAL PROG 48-TQFP
Texas Instruments V62/06621-01YE is a single-channel LVC/LCX-family logic buffer in a 5-pin SOT-23 package, providing a 32 mA output drive with a 50 pF load capacitance specification and Pb-free construction. It performs signal buffering and line driving for single-wire digital interfaces and level-sensitive logic paths. The compact SOT-23 footprint and low supply voltage compatibility make it suitable for portable electronics, industrial I/O modules, and space-constrained PCB layouts.
The LM22675MRE-5.0/NOPB/BKN is a 4.5V to 42V input, 1A SIMPLE SWITCHER buck converter with precision enable from Texas Instruments, featuring a fixed 5.0V output in a compact surface-mount package. It integrates an internal power switch and offers adjustable switching frequency for flexible inductor selection and noise management. Well-suited for point-of-load DC-DC conversion in automotive, industrial, and telecommunications equipment.
Texas Instruments PTPS78450QDBVRQ1 is an automotive-grade 300 mA, low-dropout linear regulator with a 5.5 V to 6 V input range, 0.2 V typical dropout, and fixed output voltage in a 5-pin SOT-23 package. AEC-Q100 qualified with excellent line regulation of 0.0003% for stable post-regulation in vehicle electronics.
The POPA2202IDR is a dual precision operational amplifier from Texas Instruments featuring ultra-low noise of 0.2 µVPP and 9 nV/√Hz, 148 dB typical CMRR, and heavy capacitive load drive up to 25 nF. It uses super-beta input technology to achieve a 2 µA maximum input bias current in a Small Outline package. Available from stock with worldwide shipping.
PTPS78433QDBVRQ1 is an automotive-grade 300 mA fixed-output low-dropout linear regulator in a 5-pin SOT-23 package, accepting 3.8 V to 6 V input with a maximum dropout voltage of 115 mV. AEC-Q100 qualified with 0.0003% line regulation, it targets ADAS, infotainment, and automotive sensor supply rails.
3V to 6V Input, 3A Synchronous Step-Down SWIFT™ Converter with 1.5V Output
Texas Instruments PUCC21540QDWKRQ1 is an automotive-grade reinforced isolated dual-channel gate driver supporting up to 6A peak output current with 3.3mm channel-to-channel spacing for compact half-bridge designs. Qualified to AEC-Q100 for automotive applications in a 14-pin SOIC package. Available with worldwide shipping.
LDO Voltage Regulators 200-mA, nanopower-IQ (200 nA), low-dropout (LDO) voltage regulator with enable 5-SOT-23 -40 to 125
The PREF4132B33DBVRQ1 is a Texas Instruments automotive-grade 3.3 V precision voltage reference with 12 ppm/°C temperature coefficient, low noise, and low power consumption in a 5-pin SOT-23 package for AEC-Q100-qualified designs. Available from authorized distributors with worldwide shipping.
LDO Voltage Regulators 200-mA, nanopower-IQ (200 nA), low-dropout (LDO) voltage regulator with enable 5-SOT-23 -40 to 125
TEXAS INSTRUMENTS - UCC38C43DG4 . - Current Mode PWM, 18V-12V supply, 1 MHz, 18V/200mA out, SOIC-8
200-mA, nanopower-IQ (200 nA), low-dropout (LDO) voltage regulator with enable
The TS5N118DBQR is a 10 V, 8:1 single-channel general-purpose FET bus switch functioning as an analog multiplexer with 25 MHz bandwidth, housed in a 16-pin SOIC package. It selects one of 8 input lines to a single output, supporting input voltages up to 10 V and enabling low-distortion signal routing in mixed-signal systems. Designed for audio switching, test instrumentation, industrial data acquisition, and communication signal multiplexing applications.
TLV4062DRYR is a dual analog comparator with integrated voltage reference in a 6-SON package from Texas Instruments. It features push-pull outputs, a maximum input offset voltage of 6000 µV, and a bias current of 0.015 µA, operating across -40°C to 125°C. Suitable for compact threshold detection circuits in portable and industrial applications.
LDO Voltage Regulators 200-mA, nanopower-IQ (200 nA), low-dropout (LDO) voltage regulator with enable 5-SOT-23 -40 to 125
LDO Voltage Regulators 200-mA, nanopower-IQ (200 nA), low-dropout (LDO) voltage regulator with enable 5-SOT-23 -40 to 125
Texas Instruments TPS2350DG4, 1-Channel, Hot Swap Controller, Negative Voltage, -48 V 14-Pin, SOIC
Use the download button to access the TLV9101SIDBVR schematic symbol, PCB footprint, and 3D model.
PREF4132B30DBVRQ1 is a integrated circuit for board-level control by Texas Instruments. Key specs: SOT23 (5-Pin), 5 pins, -40°C to 125°C. From inquiry pricing, in stock with worldwide shipping.
Flip Flops Schmitt-trigger input dual D-type negative-edge-triggered flip-flops w/ clear and preset 14-TSSOP -40 to 125
Need Integrated Circuit Components?
Get competitive quotes from authorized China distributors
Request a Quote