ON Semiconductor

Very Low Forward Voltage Drop - 370 mV @ 100 mA; Low Reverse Current - 1.4 uA @ 10 V; 500 mA of Continuous Forward Current; Very High Switching Speed; Low Capacitance - CT = 10 pF; This is a Pb-Free Device

Operating Input Voltage Range: 2.2V to 5.5V; Output Voltage Range: 1.2V to 3.6V (0.1V Steps); Ultra-Low Quiescent Current: Typ. 0.5 uA; Low Dropout: 170 mV Typ. at 150 mA output; High Output Voltage Accuracy: 1% Typ.; Stable with Ceramic Capacitors of 1 uF; Thermal Shutdown Protection; Automotive Qualified for NCV prefixes; Available in small 1x1mm xDFN4 package; Pb-Free Devices

Rail-to-rail : drop of only +/-1 V with Iout = 1.5A; VBB supply voltage 6-12 V; Flexible 4th-order filtering; Current-limit set with one resistor; Diagnostic flags level shitfted to VCC to simplify interface with external MCU - thermal warning flag with flexible threshold setting - thermal error flag and hutdown - overcurrent flag; Enable/shutdown control; Extended junction temperature range : -40 °C to +125 °C; Small package : 20-pin 4x4x1 mm3 NQFP with exposed thermal pad; Optimized for operation in the C

These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS Compliant; NCV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC−Q100 Qualified and PPAP Capable; Available in a Variety of Packages; Wide Temperature Range: −40 to 125°C; Low Input Bias Current: 1 pA Typical; Low Supply Current: 125 µ?A per Channel at VS = 1.8 V; High Slew Rate: 1.2 V/?s at VS = 1.8 V; Wide Bandwidth: 3 MHz; Wide Supply Range: 1.8 to 5.5 V; Rail−to−Rail Input and Output

Wide Power Supply Range: 2.2 V to 32 V; Common Mode Voltage Range Wider than Rail−to−Rail: VCM = −0.1 V to 5.1 V @ VS = 5 V; Wide Gain−bandwidth: 8 MHz typical; Low Supply Current: 1.3 mA typical; Stable with a 1 nF Capacitor Load with a Phase Margin over 25° @ VS = 10 V; Available in a Space−saving 5−pin SOT23 Package

ON Semiconductor NCS199A3SQT2G, Current Sensing Amplifier Single Rail to Rail 6-Pin SC-70

DFN-8

High Current Drive Capability; Dual Input Design

Low Quiescent Current of 2.5 µA Typical; Low Output Voltage Option; Output Voltage Accuracy of 2.0%; Temperature Range of -40°C to 85°C; NCP562 Provides an Enable Pin; Pb-Free Packages are Available

Input Voltage Rails: Supports 2.5 V, 3.3 V and 5 V Rails; PVCC Voltage Range: 1.1 to 3.5 V; Integrated Power MOSFETs; Fast Load−Transient Response; PGOOD − Logic output pin to Monitor VTT Regulation; VRI − Reference Input Allows for Flexible Input Tracking Either Directly or Through Resistor Divider; EN − Logic input pin for Shutdown mode; Built−in Under Voltage Lockout and Over Current Limit

1.8 V to 5.5 V Operating Input Voltage Range; Several Fixed Output Voltage Options and others available upon request in range from 1.2 V to 3.9 V; Low Quiescent Current of Typ. 90 µA; Very Low Dropout: 100 mV Typ. at Iout = 1 A (3.0V version); High 75 dB at 1 kHz PSRR; Internal Soft-Start; ±1.0% Accuracy in -40 to 85degC temperature range; Thermal Shutdown and Current Limit Protections; Stable with Small 1 µF Ceramic Capacitors

Several Fixed Output Voltage Options and others available upon request in range from 0.7 V to 3.6 V; 1.4 V to 5.5 V Operating Input Voltage Range; Low Quiescent Current of Typ. 60 µA; Very Low Dropout: 130 mV Typ. at Iout = 0.5 A (2.5V version); High 75 dB at 1 kHz PSRR; Internal Soft-Start; ±0.8% Accuracy at Room temperature; Thermal Shutdown and Current Limit Protections; Stable with Small 1 µF Ceramic Capacitors

Obsolete - LDO Regulator, 150 mA, Ultra-Low Iq

No frequency clamp, 80 or 110 kHz Maximum Switching Frequency; Quasi-Resonant with Valley Switching Operation; Fixed Peak Current & Deep frequency foldback @ light load operation; Wide Operation VCC range (up to 28 V); Cycle by Cycle peak current limit; CS & Vs/ZCD pin Short and Open Protection; Internal Temperature Shutdown; Constant Current Primary-side feedback eliminates secondary controller; ±10% Current Regulation; Clamped Gate-drive Output for Mosfet; Built-in soft-start; Low Start-up current ( 2 μA

500 mW Rating on FR-4 or FR-5 Board; Wide Zener Reverse Voltage Range - 2.4 V to 56 V; Package Designed for Optimal Automated Board Assembly; Small Package Size for High Density Applications; ESD Rating of Class 3 (exceeding 16 kV) per the Human Body Model Mechanical Characteristics:; CASE: Void-free, transfer-molded, thermosetting plastic case; FINISH: Corrosion resistant finish, easily solderable; MAXIMUM CASE TEMPERATURE FOR SOLDERING PURPOSES: 260°C for 10 Seconds; POLARITY: Cathode indicated by polarit

Single N-Channel Power MOSFET 30V, 4A, 50mΩ

Comparator Hysteresis Prevents Erratic Reset; Reset Output Capable of Sinking in Excess of 6.0 mA; Internal Clamp Diode for Discharging Delay Capacitor; Temperature Compensated Reference; Economical TO-226AA, SO-8 and Micro-8 Surface Mount Packages; Guaranteed Reset Operation With 1.0 V Input; Monitors 3.0 V (MC34164-3) or 5.0 V (MC34164-5) Power Supplies; Extremely Low Standby Current: As Low as 9.0 µA; Precise Comparator Thresholds Guaranteed Over Temperature

100 ps Device-to-Device Skew; 400 ps Typical Propagation Delay; PECL and HSTL Mode: VCC = 2.375 V to 3.8 V with VEE = 0 V; 25 ps Within Device Skew; Maximum Frequency > 2 GHz Typical; NECL Mode: VCC = 0 V with VEE = -2.375 V to -3.8 V; LVDS Input Compatible; Open Input Default State

260 ps Typical Propagation Delay; Voltage Supplies VCC = 3.0 V to 5.5 V, VEE = -3.0 V to -5.5 V, GND = 0 V; Fully Differential Design; Q Output will default LOW with inputs open or at VEE; Maximum Frequency > 3 GHz Typical; VBB Output; Open Input Default State; Safety Clamp on Inputs; These are Pb-Free Devices

Finish: All External Surfaces Corrosion Resistant and Terminal Leads are Readily Solderable; Case: Epoxy, Molded; Lead and Mounting Surface Temperature for Soldering Purposes: 260 °C Max. for 10 Seconds; Available in 16 mm Tape and Reel, 2500 units per reel, by adding a "T4'' suffix to the part number; Extremely Low Forward Drop; Platinum Barrier with Avalanche Guardrings Mechanical Characteristics:; Weight: 0.4 gram (approximately); Marking: B320, B330, B340, B350, B360; Extremely Fast Switching; Shipped 7

LE25S161XATAG is a Serial-SPI Flash memory IC for compact code and data storage. It provides 16 Mbit density, 70 MHz clocking, and 1.65 V to 1.95 V operation. From quoted stock, worldwide shipping.

250 mW Rating on FR-4 or FR-5 Board; Zener Breakdown Voltage Range - 2.4 V to 75 V; Package Designed for Optimal Automated Board Assembly; Small Package Size for High Density Applications; ESD Rating of Class 3 (>16 KV) per Human Body Model; Mechanical Characteristics:; CASE: Void-free, transfer-molded, thermosetting plastic case; FINISH: Corrosion resistant finish, easily solderable; MAXIMUM CASE TEMPERATURE FOR SOLDERING PURPOSES: 260°C for 10 Seconds; POLARITY: Cathode indicated by polarity band; FLAMMAB

Low Forward Voltage - 0.35 Volts (Typ) @ IF = 10 mAdc; Extremely Fast Switching Speed; Device Marking: JV; NSV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC Qualified and PPAP Capable

AX8052F151-2-TB05, RF Transceiver 400 → 470 MHz, 800 → 940 MHz, ASK, FSK, MSK, PSK, Dual Band

AX8052F143-2-TB05 is an ON Semiconductor RF transceiver for configurable wireless links. Key specs include 27–1050 MHz coverage, multiple FSK/PSK modes, and QFN packaging. From quoted pricing, in-stock sourcing supports worldwide shipping.

AX5051-1-TA05 is a ON Semiconductor integrated circuit for production electronic assemblies. Key specs include 400 → 470 MHz, 800 → 940 MHz, and Quad Flat No-Lead. From RFQ pricing, check stock for worldwide shipping.

Highly Integrated Common Mode Filter (CMF) with ESD Protection provides protection and EMI Reduction for systems using high speed Serial Data Lines with cost and space savings over Discrete Solutions ; Large Differential Mode Bandwidth with Cutoff Frequency > 2 GHz High Common Mode Stop Band Attenuation: >25 dB at 700 MHz, >30 dB at 800 MHz Typical. ; Low Profile Package with Small Footprint in WDFN8 2.0 mm length x 2.2 mm width x 0.75 mm height PbFree Package ; Provides VID & VBUS ESD Protection to IEC6100

Use the download button to access the MBR360 schematic symbol, PCB footprint, and 3D model. It supports reliable production designs and suitable target applications. From $0.01, in stock with worldwide shipping.

Compatible with bus-oriented systems; Low quiescent current: 80 µA maximum (74HC Series); Wide operating voltage range: 2 to 6 volts; Output drive capability: 15 LS-TTL loads; Low input current: 1 µA maximum; Typical propagation delay: 18 ns

Low quiescent current: 80 µA maximum ; Typical propagation delay: 18 ns; TTL input characteristic compatible; Compatible with bus-oriented systems; Output drive capability: 15 LS-TTL loads; Low input current: 1 µA maximum

Typical propagation delay: 20 ns; Low input current: 1 µA maximum; Compatible with bus-oriented systems; Low quiescent current: 80 µA maximum; Wide operating voltage range: 2-6V; Output drive capability: 15 LS-TTL loads

FOD8342T - 8 mm Creepage and Clearance Distance, and 0.4 mm Insulation Distance to Achieve Reliable and High-Voltage Insulation; 3.0 A Peak Output Current Driving Capability for Medium-Power IGBT/MOSFET – Use of P-Channel MOSFETs at Output Stage Enables Output Voltage Swing Close to Supply Rail; 20 kV/µs Minimum Common Mode Rejection; Wide Supply Voltage Range: 10 V to 30 V; Fast Switching Speed Over Full Operating Temperature Range – 210 ns Maximum Propagation Delay – 65 ns Maximum Pulse Width Distortion;

Oscillator Frequency Guaranteed at 250 kHz; Current Mode Operation to 500 kHz; Automatic Feed Forward Compensation; Latching PWM for Cycle−By−Cycle Current Limiting; Internally Trimmed Reference with Under-voltage Lockout; High Current Totem Pole Output; Under-voltage Lockout with Hysteresis; Low Startup and Operating Current; These are Pb−Free Devices; Trimmed Oscillator for Precise Frequency Control

Small Footprint (5x6 mm) for Compact Designs; Low rDS(on) to Minimize Conduction Loss; Low Capacitance to Minimize Driver Losses; 175°C Operating Temperature; NVMFD5485NLWF − Wettable Flank Option for Enhanced Optical Inspection; AEC−Q101 Qualified and PPAP Capable

Use the download button to access the CPH6443-TL-W schematic symbol, PCB footprint, and 3D model.

SC-74, SOT-457, 6 PIN

ON SEMICONDUCTOR - MCH3484-TL-W - MOSFET, N-CH, 20V, 4.5A, SOT-323

ESD Rating of Class 3 (>16kV) Human Body Model; Small Body Outline Dimensions: 0.047in x 0.032in (1.20mm x 0.80mm); Steady State Power Rating of 500mW; UL94, VO Rating; SZ Prefix for AEC-Q101 and Other Applications Requiring Unique Site and Control Change Requirements; Standard Zener Breakdown Voltage Range: 5% Tolerance; Pb-Free and RoHS Compliant

500 mW Rating on FR-4 or FR-5 Board; Wide Zener Reverse Voltage Range - 1.8 V to 43 V; Package Designed for Optimal Automated Board Assembly; Small Package Size for High Density Applications; ESD Rating of Class 3 (exceeding 16 kV) per the Human Body Model Mechanical Characteristics:; CASE: Void-free, transfer-molded, thermosetting plastic case; FINISH: Corrosion resistant finish, easily solderable; MAXIMUM CASE TEMPERATURE FOR SOLDERING PURPOSES: 260?C for 10 Seconds; POLARITY: Cathode indicated by polarit

Use the download button to access the BC817-40WT1G schematic symbol, PCB footprint, and 3D model.

HALOGEN FREE AND ROHS COMPLIANT, CASE 318-08, 3 PIN

Use the download button to access the SS9014DBU schematic symbol, PCB footprint, and 3D model.

Fairchild SMCJ120A Uni-Directional TVS Diode, 1500W peak, 2-Pin DO-214AB

No Potentiometer Required • Direct Interface to Silicon−Controlled Rectifier (SCR) • Supply Voltage Derived from AC Line – 26 V Shunt • Adjustable Sensitivity • Grounded Neutral Fault Detection • Meets U.L. 943 Standards • 450 A Quiescent Current • Ideal for 120 V or 220 V Systems • These are Pb−Free Devices

RURG8060_F085 is a ON Semiconductor Diode for rectification and reverse-polarity protection. Key specs include 2 pins, -55°C to 175°C, and 59 W. Request quote pricing, in-stock sourcing, and worldwide shipping for production builds.

PZTA56 is a ON Semiconductor Transistor for load switching and power management. Key specs include 4 pins, 14 W, and 0.5 A. Request quote pricing, in-stock sourcing, and worldwide shipping for production builds.

Over-Voltage Tolerant Inputs Facilitate 5V to 3V Translation ; Ultra-Small MicroPak™ Packages; Proprietay Noise/EMI Reduction Circuitry ; Ultra-High Speed: tPZL 2.3ns (Typical) ; Power Down High Iimpedance Inputs/Outputs ; High IOL Output Drive: +24mA at 3V VCC ; Broad VCC Operating Range: 1.65V to 5.5V

Power down high impedance inputs/output; Space saving US8 surface mount package; High Output Drive: ±24 mA at 3V VCC; Overvoltage tolerant inputs facilitate 5V to 3V translation; Broad VCC Operating Range: 1.65V to 5.5V; MicroPak™ Pb-Free leadless package; Ultra High Speed: tPD 2.4 ns typ into 50 pF at 5V VCC; Matches the performance of LCX when operated at 3.3V VCC; Patented noise/EMI reduction circuitry implemented

Power-Off high impedance inputs and outputs; 3.6V overvoltage tolerant I/O's at VCC from 0.9V to 3.6V; Uses patented Quiet Series™ noise/EMI reduction circuitry; High Static Drive (IOH/IOL)±24 mA @ 3.00V VCC±18 mA @ 2.30V VCC±6 mA @ 1.65V VCC±4 mA @ 1.4V VCC±2 mA @ 1.1V VCC±0.1 mA @ 0.9V VCC; 0.9V to 3.6V VCC supply operation; Ultra small MicroPak™ leadfree package; Ultra low dynamic power; Extremely High Speed tPD1.5 ns typ for 2.7V to 3.6V VCC1.8 ns typ for 2.3V to 2.7V VCC2.0 ns typ for 1.65V to 1.95V VC

High Static Drive (IOH/IOL)±24 mA @ 3.00V VCC±18 mA @ 2.30V VCC±6 mA @ 1.65V VCC±4 mA @ 1.4V VCC±2 mA @ 1.1V VCC±0.1 mA @ 0.9V VCC; Uses patented Quiet Series™ noise/EMI reduction circuitry; Extremely High Speed tPD1.5 ns typ for 2.7V to 3.6V VCC1.8 ns typ for 2.3V to 2.7V VCC2.0 ns typ for 1.65V to 1.95V VCC3.2 ns typ for 1.4V to 1.6V VCC6.0 ns typ for 1.1V to 1.3V VCC12 ns typ for 0.9V VCC; Ultra low dynamic power; 0.9V to 3.6V VCC supply operation; 3.6V overvoltage tolerant I/O's at VCC from 0.9V to 3.6V