ON Semiconductor

Low Profile - Maximum Height of 1.1 mm; Small Footprint - Footprint Area of 8.45 mm2; Low VF Provides Higher Efficiency and Extends battery Life; Supplied in 12 mm Tape and Reel; Low Thermal Resistance with Direct Thermal Path of Die on Exposed Cathode Heat Sink Mechanical Characteristics:; Powermite is JEDEC Registered as DO-216AA; Case: Molded Epoxy; Epoxy Meets UL94V-0 at 1/8"; Weight: 62 mg (approximately); Device Marking: BCG; Lead and Mounting Surface Temperature for Soldering Purposes. 260°C Maximum

TSSOP-14

SOIC-30

Schmitt input hysteresis: > 1V typ; High speed: tPD 4.5 ns typ; Specified for 3V operation; Balanced output drive: 2 mA IOL, -2 mA IOH; Broad VCC operating range: 2V - 6V; Balanced propagation delays; Low quiescent power: ICC < 1 µA; Space saving SOT23 or SC70 5-lead package; Ultra small MicroPak™ leadless package

Broad VCC Operating Range: 2V-6V; Low Quiescent Power; ICC < 1 µA; Ultra small MicroPak™ leadless package; High Speed; tPD 3.5 ns typ; Space saving SOT23 or SC70 5-lead package; Balanced Output Drive; 2 mA IOL, -2 mA IOH; Balanced Propagation Delays; Specified for 3V Operation

Designed for 1.65 V to 5.5 V VCC Operation; Extremely High Speed: tPD 2.0 ns (typical) at VCC = 5 V; Chip Complexity: FET = 72; Equivalent Gate = 18; Over Voltage Tolerant Inputs and Outputs; LVTTL Compatible - Interface Capability With 5 V TTL Logic with VCC = 3 V; LVCMOS Compatible; Pb-Free Packages are Available; 24 mA Balanced Output Sink and Source Capability; Near Zero Static Supply Current Substantially Reduces System Power Requirements; Replacement for NC7W04

CMOS keyboard encoder for scanned keypad interfaces. It supports 20-key encoding, 9-bit logic, three-state outputs, and a 50 pF load in SOIC-20. From $3.00, in stock worldwide.

DIP-18

MM74C923N from ON Semiconductor is a integrated circuit for production electronic assemblies, replacement sourcing, and design-in evaluation. Key known parameters include 50 pF, -40°C to 85°C. It is supplied in Dual-In-Line Packages packaging with 20 pins, supporting BOM review, PCB footprint checks, and purchasing qualification for industrial, embedded, and maintenance applications.

MM74C923WM from ON Semiconductor is a integrated circuit for production electronic assemblies, replacement sourcing, and design-in evaluation. Key known parameters include 50 pF, -40°C to 85°C. It is supplied in Small Outline Packages packaging with 20 pins, supporting BOM review, PCB footprint checks, and purchasing qualification for industrial, embedded, and maintenance applications.

Constant Current Control with Primary Side Feedback; Power factor correction with low harmonic distortion; Precise Current Regulation Accuracy; Line feedforward for enhanced regulation accuracy; Wide Vcc operating range; User Programmable Thermal Foldback; Open and Shorted LED/Output Diode Protection; Wide temperature range of -40 to 125 °C; Dedicated Analog/Digital Dimming control; VCC Undervoltage and overvoltage protection

High Conductance Low Leakage Diode

MC33340DG is a ON Semiconductor integrated circuit component for OEM assemblies, repairs, and production sourcing. Key specs include Small package, 8 pins, 61A. Available through RFQ pricing, in-stock sourcing, and worldwide shipping support.

Obsolete - NiCd/NiMH Battery Fast Charge Controller

1.4ns Typical Propagation Delay; VBB Output; Maximum Frequency > 275 MHz Typical; 24mA TTL outputs; New Differential Input Common Mode Range; The 100 Series Contains Temperature Compensation; LVPECL/LVDS/CML Inputs, LVTTL/LVCMOS Outputs

Miniature SOT-23 Surface Mount Package Saves Board Space; Low rDS(on) Provides Higher Efficiency and Extends Battery Life; Pb-Free Packages are Available; NSV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AECQ101 Qualified and PPAP Capable

Low Input Current: 1.0 mA; Operating Voltage Range: 2.0 to 6.0 V; Outputs Directly Interface to CMOS, NMOS, and TTL; Output Drive Capability: 10 LSTTL Loads; High Noise Immunity Characteristic of CMOS Devices; In Compliance with the Requirements Defined by JEDEC Standard No. 7A; Chip Complexity: 192 FETs or 48 Equivalent Gates; Pb-Free Packages are Available*

SOIC-20

Simplifies Circuit Design; Reduces Component Count; S Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC-Q101 Qualified and PPAP Capable; These Devices are PbFree, Halogen Free/BFR Free and are RoHS Compliant

Simplifies Circuit Design; Reduces Board Space; Reduces Component Count; S and NSV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC-Q101 Qualified and PPAP Capable; These Devices are PbFree, Halogen Free/BFR Free and are RoHS Compliant

Use the download button to access the BVSS138LT1G schematic symbol, PCB footprint, and 3D model.

Use the download button to access the NSVJ3557SA3T1G schematic symbol, PCB footprint, and 3D model.

SOD-923, 2 PIN

No External Components Required; Output Transistor Safe-Area Compensation; Internal Thermal Overload Protection; Internal Short Circuit Current Limiting; Output Current in Excess of 1.0 A; Output Voltage Offered in 1.5%, 2% and 4% Tolerance; Pb-Free Packages are Available

Short Circuit Protection; Thermal Shutdown with Automatic Restart; Overvoltage Protection; Integrated Clamp for Inductive Switching; Loss of Ground Protection; ESD Protection; Slew Rate Control for Low EMI; Very Low Standby Current; AEC-Q100/101 Qualified

Operating frequency : 40MHz; Temperature range : -40 to 85°C; Serial interface : SPI mode 0, mode 3 supported / Dual Output, Dual I/O supported; Sector size : 4K bytes/small sector, 64K bytes/sector; Small sector erase, sector erase, chip erase functions; Page program function (256 bytes / page); Block protect function; Highly reliable read/write Number of rewrite times : 100,000 times Small sector erase time : 40ms (typ), 150ms (max) Sector erase time : 80ms (typ), 250ms (max) Chip erase time : 250ms (typ)

ON Semiconductor FSUSB20MUX is a 2-channel single-ended multiplexer IC for USB signal routing. It offers 26 dB nominal off-state isolation in MSOP-10. Request quote for legacy repair or controlled supply.

Power down protection provided on all inputs; High Speed: tPD = 5.7ns (typ) at TA = 25°C; Pin and function compatible with 74HC138; Low power dissipation: ICC = 4 µA (max.) at TA = 25°C; High noise immunity: VNIH = VNIL = 28% VCC (min.)

Use the download button to access the MM74HCT05M schematic symbol, PCB footprint, and 3D model.

Simplifies Circuit Design; Reduces Board Space; Reduces Component Count; NSV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC-Q101 Qualified and PPAP Capable; These Devices are Pb-Free, Halogen Free/BFR Free and are RoHS Compliant

ON Semiconductor P2N2907A is a single silicon PNP BJT transistor. It supports 60 V collector-emitter voltage, 0.6 A collector current, hFE 100 minimum and TO-92 packaging. From $0.00 in stock worldwide shipping.

Extremely Fast Switching Speed; Extremely Low Forward Voltage: 0.28 V (Typ) @ IF = 1.0 mAdc; Low Reverse Current; Lead−Free Plating; These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS Compliant

Extremely Fast Switching Speed; Extremely Low Forward Voltage: 0.28 V (Typ) @ IF = 1.0 mAdc; Low Reverse Current; Lead−Free Plating; These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS Compliant

Power Supply Range: 2.5 to 5.5 V; Very Low Typical Standby Current: < 4 µA; Very Low Operating Current: < 10 mA; Simple Serial Interface - Single-bit SPI Access - DUAL-bit and QUAD-bit SPI-like Access; Flexible Operating Modes - Word Mode - Page Mode - Burst Mode (Full Array); High Frequency Read and Write Operation - Clock Frequency 20 MHz; Functional Options - HOLD Pin for Pausing Operation - VBAT Pin for Battery−Back up; Built-in Write Protection (CS High); High Reliability - Unlimited Write Cycles

Faster Rise and Fall Times; Adaptive Anti-Cross-Conduction Circuit; Integrated Bootstrap Diode; Pre OV function; ZCD Detect; Floating Top Driver Accommodates Boost Voltages of up to 35 V; Output Disable Control Turns Off Both MOSFETs; UnderVoltage Lockout; Power Saving Operation Under Light Load Conditions; Direct Interface to NCP6151 and Other Compatible PWM Controllers; Thermally Enhanced Package

MCR703AT4G is an ON Semiconductor single SCR thyristor. It uses lead-free DPAK-3 case 369C with 1 V gate trigger, 0.075 mA trigger current, and 10 mA holding current. From quote-based pricing, inquiry stock ships worldwide.

Operating Input Voltage: Up to 450 VDC ; PSRR: 70 dB at 60 Hz; Quiescent Current: 10 µA typical; SOT-223 Package

FDMD8560L is a dual N-channel power MOSFET with series-connected elements and body diodes. It offers 60 V breakdown, 93 A current, 3.2 mΩ on-resistance, and 384 mJ avalanche rating. From quote-based supply with worldwide shipping.

Fairchild Semiconductor NC7SZ32M5, 2-Input OR Logic Gate, 1.65 → 5.5 V, 5-Pin SOT-23

Fairchild Semiconductor NC7SZ08P5, 2-Input AND Logic Gate, 1.65 → 5.5 V, 5-Pin SC-70

Broad VCC Operating Range; 2V-6V ; Balanced Output Drive; 2 mA IOL, -2 mA IOH; Space saving SOT23 or SC70 5-lead package ; Balanced Propagation Delays ; Low Quiescent Power; ICC < 1 µA; Ultra small MicroPak™ Pb-Free leadless package; High Speed; tPD 3.5 ns typ; Specified for 3V operation

12.8A, 100V, RDS(on) = 180mΩ(Max.) @VGS = 10 V, ID = 6.4A; 100% avalanche tested; Low Crss ( Typ. 20pF); 175°C maximum junction temperature rating; Low gate charge ( Typ. 8.7nC)

Bushold data inputs eliminate the need for external pull-up resistors to hold unused inputs (74LVTH245), also available without bushold feature (74LVT245); ESD performance:Human-body model > 2000VMachine model > 200VCharged-device model > 1000V; Latch-up performance exceeds 500 mA; Outputs source/sink, -32 mA/+64 mA ; Power Up/Down high impedance provides glitch-free bus loading; Live insertion/extraction permitted; Input and output interface capability to systems at 5V VCC

Gate-Source Zener for ESD ruggedness (>6kV Human Body Model). ; P-Ch -0.14 A, -25 V, RDS(ON) = 10 Ω @ VGS= -4.5 V, RDS(ON) = 13 Ω @ VGS= -2.7 V. ; Very small package outline SC70-6. ; Very low level gate drive requirements allowing direct operation in 3 V circuits (VGS(th) < 1.5 V). ; N-Ch 0.22 A, 25 V, RDS(ON) = 4.0 Ω @ VGS= 4.5 V, RDS(ON) = 5.0 Ω @ VGS= 2.7 V.

Provides a Robust Driver Interface Between D.C. Relay Coil and Sensitive Logic Circuits; Optimized to Switch Relays of 12 V Rail; Capable of Driving Relay Coils Rated up to 6.0 W at 12 V; Internal Zener Eliminates the Need of Free-Wheeling Diode; Internal Zener Clamp Routes Induced Current to Ground for Quieter Systems Operation; Low VDS(ON) Reduces System Current Drain

Use the download button to access the NTTFS5C673NLTAG schematic symbol, PCB footprint, and 3D model.

Use the download button to access the NTMFS5C430NLT1G schematic symbol, PCB footprint, and 3D model.

Base−Emitter Voltage Matched to 2 mV; Current Gain Matching to 10%; Drop−In Replacement for Standard Device; NSV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC−Q101 Qualified and PPAP Capable; These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS Compliant

Current Gain Matching to 10%; Base−Emitter Voltage Matched to ≤ 2 mV; Drop−In Replacement for Standard Device; NSV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC−Q101 Qualified and PPAP Capable; These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS Compliant

Low Forward Voltage Drop - 580 mV (Typ.) @ IF = 500 mA; Low Reverse Current - 2.0 uA (Typ.) @ VR = 40 V; 500 mA of Continuous Forward Current; High ESD Rating: HBM - Class 3B; CDM - Class IV; High Switching Speed; These Devices are Pb-Free, Halogen Free/BFR Free and RoHS Compliant