Microchip

The HV56022-V/KNX is a dual-channel high-voltage operational amplifier from Microchip capable of operating from supply voltages up to 36V, suitable for driving high-impedance loads in industrial and precision analog signal chains. It features rail-to-rail output swing and wide bandwidth in a compact 20-pin VQFN package. Designed for industrial sensor interfaces, motor drive feedback circuits, and high-voltage data acquisition front-ends.

Security ICs / Authentication ICs Trust Flex TLS, Provisioned Proto Typing, 8-SOIC (10 bulk)

Microchip USB7052N/KDX is a USB 3.1 Gen 1 hub controller IC with integrated CC logic and I2C/SPI/UART interfaces, supporting up to 625 MBps data transfer in a compact 100-pin VQFN package.

16-bit Microcontrollers - MCU 16-Bit, 16 MIPS, 512KB ECC Flash, 32KB RAM, LCD, 48-pin

The PIC16F18055-I/STX is an 8-bit PIC microcontroller with 14 KB Flash, 1 KB RAM, 10-bit ADCC, 8-bit DAC, 32 MHz clock, and a 28-pin VQFN package for cost-sensitive embedded control and sensor applications.

LCC-32

Zener Diodes 5.1V .12 Ohms 50W Voltage Regulator

Unidirectional and Bidirectional Transient Voltage Suppressor (TVS) Device

Voltage References 7 ppm 0.1% Voltage Reference

ESD Suppressors / TVS Diodes Hi Rel TVS

Microchip PIC16F747TI/PT is an 8-bit microcontroller in a 44-pin TQFP package, featuring a 20 MHz clock, 36 I/O lines, and integrated ADC. Available in stock with worldwide shipping.

52kHz Simple 3A Buck Regulator

125 MHz XO (Standard) CMOS Oscillator 1.8V ~ 3.3V Standby (Power Down) 4-SMD, No Lead

MICROCHIP - PIC16F1455-E/SL - 8 Bit MCU, PIC16 Family PIC16F145x Series Microcontrollers, 48 MHz, 14 KB, 14 Pins, NSOIC

PIC16F1827T-E/MV027 is an 8-bit PIC microcontroller from Microchip featuring nanoWatt XLP ultra-low-power technology with a 20MHz maximum clock and 1.8V to 5.5V operating range. It integrates ADC, DAC channels, and flash memory in a QFN package for cost-sensitive IoT and embedded sensing applications.

SURFACE MOUNT 1.0 W GLASS ZENER DIODES DO-213AB

• Low Quiescent Current: - 720 µA (maximum)/amplifier • Low Input Offset Voltage: - ±1.6 mV (maximum) • Enhanced EMI Protection • Supply Voltage Range: 1.8V to 5.5V • Gain Bandwidth Product: 10 MHz (typical) • Rail-to-Rail Input/Output • Unity Gain Stable • No Phase Reversal • Quick Start-up Time • Small Packages: - Singles in SC70-5, SOT-23-5 - Dual in SOIC-8, MSOP-8 - Quad in SOIC-14, TSSOP-14 • Extended Temperature Range:-40°C to +125°C • AEC Q100 Qualified, see Section “Product Identifi

12-Bit Digital-to-Analog Converter with EEPROM Memory

ARM Microcontrollers - MCU CM23, ULP, Touch, 512K Flash, 64 Pin TQFP

TO-39, 3 PIN

Use the download button to access the MCP6024T-E/SL schematic symbol, PCB footprint, and 3D model.

1.62V - 3.63V, -40ºC to +85ºC, DC to 48 MHz (PIC32CM LE00/LS00)

Microchip MSC400SMA330B4 is a 3300 V SiC N-Channel Power MOSFET in a TO-247-4 package with 400 mΩ on-resistance and 11 A drain current. It integrates a built-in anti-parallel diode for high-voltage power conversion applications.

Operational Amplifiers - Op Amps Dual, 10MHz Op Amp, E Temp

IGBT Modules IGBT Fieldstop Low Frequency Combi 1200 V 150 A SOT-227

AVR64DD14 is a low-pin-count 8-bit AVR microcontroller with 64 KB Flash, 8 KB SRAM, and 256 bytes EEPROM running up to 24 MHz. It features a 14-pin package with multiple analog and digital peripherals for embedded control. Ideal for cost-sensitive IoT nodes, sensor interfaces, and industrial automation tasks.

Voltage References 50 ppm 0.1% Voltage Reference

8-bit Microcontrollers - MCU 16KB, 2KB RAM, 14p, 24MHz, MVIO, 12b ADC, ZCD, DAC, 2xUART, SPI, TWI

MIC28500YJL is a high-voltage synchronous buck switching regulator from Microchip Technology, accepting 30 V to 75 V input and delivering up to 9 A peak (4 A continuous rated) at an adjustable output voltage from 0.8 V upward in a 28-pin PowerVQFN package. It targets 48 V bus step-down conversion for telecom equipment, networking gear, and industrial power modules. The device integrates both power switches and gate drivers, reducing external component count for compact, high-efficiency DC-DC designs.

The A2F200M3F-FG256 is a SmartFusion FPGA from Microchip with 200K equivalent gates, 4608 logic cells, and an integrated ARM Cortex-M3 hard processor core running at up to 100 MHz in 130 nm technology. It operates at 1.5 V core voltage and is housed in a 256-pin FBGA package with 117 user I/O pins. Suitable for embedded control, industrial automation, and communication interface bridging applications.

Microchip ATMXT288UD-AMTI2CVAO is an automotive-grade capacitive touchscreen controller supporting 2-key detection in a 56-pin VQFN package, qualified to AEC-Q100. Designed for in-vehicle human-machine interfaces requiring reliable touch performance across wide temperature ranges. Suitable for automotive infotainment panels, HVAC controls, and center console touch displays.

Voltage References 7 ppm 0.1% Voltage Reference

Voltage References 7 ppm 0.1% Voltage Reference

RF MOSFET Transistors FG, MOSFET, 500V, TO-247, RoHS

32-bit Microcontrollers - MCU 256KB Flash, 32KB RAM, 79 CoreMark at 25MHz, Low Power microMIPS

Clock Buffer 1:4 LPHCSL Fanout Buffer with output enable (100 Ohm)

The MIC28304-2YMP is a non-isolated point-of-load DC-DC converter module from Microchip delivering up to 3 A output current, adjustable output voltage from 0.9 V to 24 V, and a wide 4.5 V to 70 V input range in a compact 64-pad QFN package.

DIP32 FLASH MEMORY

8-bit Microcontrollers - MCU 28KB Flash, 512B RAM, 128B EEPROM, 12b Diff. ADCC, 1xOP-AMP, 2x16-bit dual PWM

Clock Buffer 1:2 LPHCSL Fanout Buffer with output enable (100 Ohm)

The MCP1702-3002E/CB is a fixed 3.0 V, 250 mA low-dropout linear regulator from Microchip with ultra-low quiescent current, 625 mV typical dropout voltage, and 0.075% load regulation in a compact SOT-23-3 package for battery-powered and IoT sensor applications.

Microchip 090-02789-002 is a Chip Scale Atomic Clock (CSAC-SA65 Option 002) producing a 10 MHz CMOS output with atomic-level frequency stability in a compact through-hole package. It measures 40.64 mm x 35.306 mm x 11.43 mm and provides rise and fall times under 10 ns for precision timing applications. Designed for GPS receivers, military communications, and portable instrumentation requiring ultra-stable frequency references.

8-bit Microcontrollers - MCU 16KB, 8KB RAM, 20p, 24MHz, MVIO, 12b ADC, ZCD, DAC, 2xUART, SPI, TWI

8-bit Microcontrollers - MCU 28KB Flash, 512B RAM, 128B EEPROM, 12b Diff. ADCC, 1xOP-AMP, 2x16-bit dual PWM

Microchip MIC2090-2YM5 is a single-channel current-limiting power distribution switch and load switch IC in a SOT-23-5 package, providing integrated overcurrent protection for USB and system power rails. It features a fixed current limit threshold and enables safe power sequencing with short-circuit protection. Stocked globally for portable electronics, USB power management, and single-board computer power distribution designs.

Microchip DSPIC33CK256MP206I/MR is a integrated circuit for embedded electronics, industrial controls, instrumentation, and production BOM sourcing. It offers 65 pins, 16-Bit, 64-pin in Quad Flat No-Lead. From quote-based sourcing, buyers can request stock checks and worldwide shipping support.

The Microchip AT24C32 is a 32 Kbit (4 KB) I2C serial EEPROM with a 400 kHz fast-mode interface and 1.8 V to 5.5 V wide supply range. It offers 32-byte page write and a 1,000,000-cycle endurance rating with 100-year data retention. Available in DIP-8, SOIC-8, and TSSOP-8 packages with worldwide stock and fast shipping.

IR-UWB Transceiver 1.25V/3.3V 6.2GHz to 8.3GHz 33-Pin TFBGA

MKL13Z32VLH4

Set Point or Offset Trimming Plastic Quad Flat, No Lead Package (QFN),4 mm x 4 mm, 20-Lead