DSPIC30F6010A-30I/PT Microchip Integrated Circuit (Quad Flat Packages) In Stock

The Microchip DSPIC30F6010A-30I/PT is a 16-bit digital signal controller running at up to 30 MIPS with a 40 MHz maximum clock frequency in an 80-pin TQFP package. It integrates a barrel shifter, fixed-point DSP engine, and supports operation down to 2.5 V at 10 MHz for power-sensitive designs. Suited for motor control, power conversion, and embedded digital signal processing requiring real-time performance.

ACTIVEIntegrated CircuitVerified Jun 2026
Package / Visual Reference
DSPIC30F6010A-30I/PTQuad Flat Packages
Quick Facts
Manufacturer
Microchip
Package
Quad Flat Packages
Pin Count
80
Lifecycle
ACTIVE
Category
Integrated Circuit
Price
From $11.2400(MOQ 1)
Temp Range
-40.0°C to 85.0°C
RoHS
Compliant
Lead Time
3–7 business days
Shipping
DHL Express · Worldwide

What are the key features of DSPIC30F6010A-30I/PT?

  • 16-bit fixed-point DSP core executing at up to 30 MIPS with 40 MHz maximum clock and hardware barrel shifter
  • 80-pin TQFP package provides extensive I/O, multiple UART/SPI/I2C peripherals, and PWM outputs for motor control
  • Operates at 2.5 V minimum supply at 10 MHz, enabling low-power battery-fed embedded DSP applications
  • RoHS-compliant, Pb-free construction with industrial temperature range suitable for demanding embedded environments

What is DSPIC30F6010A-30I/PT used for?

The DSPIC30F6010A-30I/PT targets brushless DC and AC induction motor control applications where the DSP core executes FOC algorithms at 30 MIPS while dedicated PWM hardware generates complementary drive signals. It is also used in power factor correction converters and UPS systems requiring real-time fixed-point arithmetic on 16-bit ADC samples. Embedded signal processing for industrial sensor nodes and audio processing front-ends benefits from the barrel shifter and multiply-accumulate architecture.

What are the specifications of DSPIC30F6010A-30I/PT?

Pbfree CodeYes
Manufacturer Package CodeTQFP-80
Factory Lead Time6Weeks
YTEOL8
Additional FeatureALSO OPERATES AT 2.5V MINIMUM SUPPLY AT 10 MHZ
Barrel ShifterYES
Bit Size16
Boundary ScanNO
Clock Frequency-Max40MHz
FormatFIXED POINT
Internal Bus ArchitectureMULTIPLE
JESD-30 CodeS-PQFP-G80
JESD-609 Codee3
Low Power ModeYES
On Chip Program ROM Width24
Package Body MaterialPLASTIC/EPOXY
Package Equivalence CodeTQFP80,.55SQ
Package ShapeSQUARE
Package StyleFLATPACK, THIN PROFILE, FINE PITCH
Peak Reflow Temperature (Cel)260
Qualification StatusNot Qualified
ROM ProgrammabilityFLASH
Screening LevelTS 16949
Supply Voltage-Max5.5V
Supply Voltage-Min4.5V
Supply Voltage-Nom5V
Surface MountYES
TechnologyCMOS
Temperature GradeINDUSTRIAL
Terminal FinishMatte Tin (Sn)
Terminal FormGULL WING
Terminal Pitch0.5mm
Terminal PositionQUAD
Time@Peak Reflow Temperature-Max (s)40
uPs/uCs/Peripheral ICs TypeDIGITAL SIGNAL PROCESSOR, CONTROLLER
PackageQuad Flat Packages

Compliance & Regulatory

RoHS StatusCompliant
Lead-FreeYes (Pb-Free)
Moisture Sensitivity LevelMSL 3
ECCN3A991.A.2
HTS Code8542.31.00.01
Country of OriginThailand

Where can I find the DSPIC30F6010A-30I/PT datasheet?

DSPIC30F6010A-30I/PT Datasheet Download

Official datasheet from Microchip

What are equivalent replacements for DSPIC30F6010A-30I/PT?

No known alternates. Submit an RFQ and our team can suggest alternatives.

Frequently Asked Questions

What clock speed and instruction throughput does the DSPIC30F6010A-30I/PT achieve in a 3.3 V motor control design?

At 3.3 V supply, the DSPIC30F6010A-30I/PT operates at up to 40 MHz oscillator frequency, yielding 30 MIPS throughput because the device executes one instruction every 4 clock cycles with its pipelined 16-bit DSP core. This provides sufficient headroom to run a complete FOC motor control loop—including Park/Clarke transforms and PI regulators—in under 33 microseconds at a 30 kHz PWM switching rate.

How does the DSPIC30F6010A-30I/PT's barrel shifter accelerate fixed-point DSP code compared to a standard 16-bit MCU without one?

A hardware barrel shifter shifts a 16-bit or 32-bit value by up to 16 positions in a single clock cycle. Without it, a standard MCU needs N shift instructions to move N bit positions, consuming N clock cycles. In fixed-point filter coefficient scaling for audio or vibration analysis, where shift operations may run thousands of times per second, the barrel shifter reduces shift-heavy loop execution time by up to 16x relative to software-emulated multi-step shifts.

What is the minimum supply voltage for the DSPIC30F6010A-30I/PT, and which battery-powered scenarios benefit from this specification?

The DSPIC30F6010A-30I/PT operates at a minimum supply voltage of 2.5 V at reduced clock speed of 10 MHz. This range covers the discharge curve of a single-cell LiPo battery from 3.7 V nominal down to approximately 2.8 V cutoff, enabling designs such as portable industrial data loggers, wireless sensor nodes, and battery-backed PLC I/O modules to continue operating through most of the battery's useful life without a boost converter.

Which communication peripherals are available on the DSPIC30F6010A-30I/PT's 80-pin TQFP package for industrial connectivity?

The DSPIC30F6010A-30I/PT in TQFP-80 provides multiple serial interfaces including at least 2 UART channels supporting up to 1 Mbit/s baud rate, 2 SPI ports for high-speed sensor and display interfacing, and 1 I2C port for low-pin-count peripheral expansion. Combined with the 80 available pins, designers can implement RS-485 fieldbus nodes, SPI-based motor drive gate drivers, and I2C EEPROM parameter storage without external interface ICs.

Related Guides

Why Buy from FindMyChip

Authorized Source
Verified supply chain with full traceability & inspection
Competitive Pricing
Factory-direct from China distributors, low MOQ
Fast Shipping
DHL Express 3–5 days · FedEx/UPS 5–7 days worldwide
Quality Guaranteed
30-day replacement for defective parts, no questions asked

About Microchip

Microchip is a leading electronic component manufacturer. FindMyChip sources Microchip ICs directly from authorized China distributors, offering competitive pricing and reliable stock.

AvailabilityIn Stock
Reference Price (USD)
From $11.2400
Buy from 1pc · Factory-direct pricing
Qty.Unit PriceExt. Price
1+$14.6800$14.68
15+$13.1400$197.10
25+$13.0700$326.75
50+$12.8800$644.00
100+$11.2700$1127.00
250+$11.2400$2810.00
pcs
Unit price: $14.6800 · Total: $14.68

In Stock · 24h Response · Worldwide Shipping

Lead Time3-7 business days
MOQFrom 1 piece
ShippingDHL / FedEx / UPS
OriginChina (Authorized)

Response within 24 hours · Worldwide shipping

Their engineering team helped us find a pin-compatible alternative when our original MCU went EOL.

MR
Marco Rossi
CTO, AutoDrive Systems, Italy