MCP1603T-250I/OS Microchip Integrated Circuit (SOT23 (5-Pin)) In Stock

Microchip MCP1603T-250I/OS is a 2.0 MHz synchronous buck regulator delivering up to 500 mA output current with a fixed 2.5 V output, operating from a 2.7 V to 5.5 V input supply. Its current-mode PWM control and tiny SOT-23-5 package make it ideal for portable and space-constrained power rails.

ACTIVEIntegrated CircuitVerified Jun 2026
Package / Visual Reference
MCP1603T-250I/OSSOT23 (5-Pin)
Quick Facts
Manufacturer
Microchip
Package
SOT23 (5-Pin)
Pin Count
5
Lifecycle
ACTIVE
Category
Integrated Circuit
Price
From $0.3276(MOQ 1)
Temp Range
-40.0°C to 85.0°C
RoHS
Compliant
Lead Time
3–7 business days
Shipping
DHL Express · Worldwide

Key Features

  • 2.0 MHz switching frequency enabling small external passives
  • 500 mA continuous output current capability
  • Fixed 2.5 V output in a SOT-23-5 package
  • Input voltage range 2.7 V to 5.5 V for single-cell Li-ion and USB sources
  • Current-mode PWM control for fast transient response
  • PFM mode for improved efficiency at light loads
  • RoHS compliant, lead-free packaging

Applications

MCP1603T-250I/OS is widely used in battery-powered consumer electronics, wearable devices, and portable instruments where a compact step-down regulator must supply 2.5 V from a Li-ion or USB source. It also serves as a point-of-load regulator in wireless sensor nodes and Bluetooth/ZigBee modules where PCB area and quiescent current are tightly constrained.

Specifications

Pbfree CodeYes
Manufacturer Package CodeTSOT-5
YTEOL8
Additional FeatureIT CAN ALSO OPERATE WITH PULSE FREQUENCY MODULATION
Analog IC - Other TypeSWITCHING REGULATOR
Control ModeCURRENT-MODE
Control TechniquePULSE WIDTH MODULATION
Input Voltage-Max5.5V
Input Voltage-Min2.7V
Input Voltage-Nom3.6V
JESD-30 CodeR-PDSO-G5
JESD-609 Codee3
Number of Functions1
Output Current-Max0.5A
Output Voltage-Max2.575V
Output Voltage-Min2.425V
Output Voltage-Nom2.5V
Package Body MaterialPLASTIC/EPOXY
Package Equivalence CodeTSOP5/6,.11,37
Package ShapeRECTANGULAR
Package StyleSMALL OUTLINE, THIN PROFILE
Peak Reflow Temperature (Cel)260
Qualification StatusNot Qualified
Screening LevelTS 16949
Surface MountYES
Switcher ConfigurationBUCK
Switching Frequency-Max2800kHz
Temperature GradeINDUSTRIAL
Terminal FinishMatte Tin (Sn)
Terminal FormGULL WING
Terminal Pitch0.95mm
Terminal PositionDUAL
PackageSOT23 (5-Pin)

Compliance & Regulatory

RoHS StatusCompliant
Lead-FreeYes (Pb-Free)
Moisture Sensitivity LevelMSL 2
ECCNEAR99
HTS Code8542.39.00.01
Country of OriginMalaysia

Datasheet

MCP1603T-250I/OS Datasheet Download

Official datasheet from Microchip

Alternate & Equivalent Parts

No known alternates. Submit an RFQ and our team can suggest alternatives.

Frequently Asked Questions

What output current can MCP1603T-250I/OS continuously deliver in a 2.5 V buck application?

MCP1603T-250I/OS supports up to 500 mA continuous output current at 2.5 V, making it suitable for MCUs, RF transceivers, and peripheral circuits that together draw moderate current from a compact synchronous buck stage.

How does the 2.0 MHz switching frequency influence inductor and capacitor selection in this regulator?

Operating at 2.0 MHz allows designers to use inductors in the 1 µH to 2.2 µH range and ceramic output capacitors as small as 4.7 µF, shrinking total BOM size and PCB footprint compared to lower-frequency alternatives. The result is a compact power stage below 10 mm² on many layouts.

Can MCP1603T-250I/OS be powered directly from a single-cell Li-ion battery?

Yes. The device accepts input voltages from 2.7 V to 5.5 V, which spans the full discharge curve of a 3.7 V Li-ion cell (approximately 3.0 V to 4.2 V). This means it can regulate a stable 2.5 V output without an intermediate boost stage, extending usable battery runtime.

What makes the SOT-23-5 package practical for wearable and IoT PCB layouts?

The SOT-23-5 package occupies a board footprint of roughly 1.6 mm × 2.9 mm, allowing the regulator to fit in densely populated wearable or IoT modules alongside RF ICs and sensors. The 5-pin layout simplifies routing with minimal via count compared to larger QFN alternatives.

Is MCP1603T-250I/OS a direct alternative to MCP1603T-330I/OS when a 2.5 V rather than 3.3 V rail is required?

Yes. Both devices share the same SOT-23-5 footprint, 500 mA current rating, and 2.0 MHz switching frequency. The only difference is the fixed output voltage — 2.5 V for the -250 variant versus 3.3 V for the -330 variant — enabling a pin-compatible swap when a lower voltage rail is required.

Why Buy from FindMyChip

Authorized Source
Verified supply chain with full traceability & inspection
$
Competitive Pricing
Factory-direct from China distributors, low MOQ
Fast Shipping
DHL Express 3–5 days · FedEx/UPS 5–7 days worldwide
Quality Guaranteed
30-day replacement for defective parts, no questions asked

About Microchip

Microchip is a leading electronic component manufacturer. FindMyChip sources Microchip ICs directly from authorized China distributors, offering competitive pricing and reliable stock.

AvailabilityIn Stock
Reference Price (USD)
From $0.3276
Buy from 1pc · Factory-direct pricing
Qty.Unit PriceExt. Price
1+$0.5380$0.54
25+$0.4900$12.25
78+$0.4680$36.50
100+$0.4500$45.00
250+$0.3744$93.60
500+$0.3276$163.80
pcs
Unit price: $0.5380 · Total: $0.54

In Stock · 24h Response · Worldwide Shipping

Lead Time3-7 business days
MOQFrom 1 piece
ShippingDHL / FedEx / UPS
OriginChina (Authorized)

Response within 24 hours · Worldwide shipping

We've been using FindMyChip for 2 years. Pricing is consistently 20-30% below Mouser/DigiKey for volume orders.

SK
Sarah Kim
VP Engineering, NovaBit Electronics, South Korea