Microchip

Atmel AT24C01D-STUM-T EEPROM Memory Chip, 1kbit, 1.7 → 3.6 V 5-Pin SOT

Microchip TCM810JVNB713 is a voltage supervisor and reset IC with a 4.1 V maximum threshold in a compact 3-pin SOT-23B package. It monitors supply rails and asserts a reset signal when voltage drops below threshold, ensuring reliable microcontroller startup and brownout protection in space-constrained designs.

Atmel AT24C32D-XHM-B EEPROM Memory, 32kbit, 600ns, 1.7 → 5.5 V 8-Pin TSSOP

Atmel AT24C128C-XHM-B EEPROM Memory, 128kbit, 900ns, 1.7 → 5.5 V 8-Pin TSSOP

Microchip TCM810ZVLB713 is a single-channel voltage supervisor and microcontroller reset IC in a 3-pin SC-70 package. It monitors supply rails from 2.5 V to 5 V and asserts an active-low RESET signal during undervoltage conditions, ensuring reliable system startup and brownout recovery.

Microchip TCM809RVNB713 is a single-channel voltage supervisor with a fixed reset threshold between 2.55 V and 2.7 V and an active-low push-pull reset output. It operates with minimal supply current and is housed in a compact 3-pin SOT-23 package. Designed for microprocessor reset supervision in battery-powered and embedded systems.

Atmel AT24C128C-SSHM-B EEPROM Memory, 128kbit, 900ns, 1.7 → 5.5 V 8-Pin SOIC

Atmel AT24C256C-XHL-B EEPROM Memory, 256kbit, 600ns, 1.7 → 5.5 V 8-Pin TSSOP

Atmel AT24C04D-XHM-B EEPROM Memory Chip, 4kbit, 1.7 → 3.6 V 8-Pin TSSOP

PIC16F1782-I/SO is an 8-bit PIC microcontroller by Microchip running up to 32 MHz, with 2048 words Flash, 256 B EEPROM, integrated ADC and DAC, and operation down to 2.3 V. It comes in a 28-pin SOIC package enabling surface-mount assembly. Designed for industrial and consumer applications including motor control, sensor interfaces, and low-power embedded systems.

Atmel AT24C02D-STUM-T EEPROM Memory Chip, 2kbit, 1.7 → 3.6 V 5-Pin SOT

Microchip TCM828ECT713 is a switched capacitor charge pump voltage converter supporting input voltages from 1.5 V to 5.5 V and output current up to 25 mA at 12 kHz switching frequency. It delivers an inverted or doubled output in a compact 5-pin SOT-23 package suitable for space-constrained designs.

Microchip TCN75AVOA is a 2-wire I2C digital temperature sensor with ±2°C maximum accuracy and programmable alert output in an SOIC-8 package. It measures temperatures from -40°C to +125°C and communicates over I2C with configurable resolution. Suitable for thermal management, environmental monitoring, and system health protection in industrial and consumer electronics.

The Microchip USB5533B-5000JZX is a USB 3.0 SuperSpeed hub controller supporting data rates up to 5 Gbps per port, with simultaneous USB 2.0 backward compatibility and I2C/SPI configuration interfaces. Operating from 1.25 V and 3.3 V supplies, it is housed in a 64-pin QFN package for compact multi-port hub and docking station designs.

Microchip USB5532B-5000JZX is a USB 3.1 Gen 1 SuperSpeed hub controller supporting 2 downstream ports with up to 625 MBps data transfer. It operates from 3.3 V, integrates I2C, SMBus, and SPI configuration interfaces, and is housed in a 64-pin QFN package for compact USB hub designs.

UCS1002-1-BP-TR is a single-port USB power delivery controller from Microchip supporting USB 2.0 with a 2.9 V to 5.5 V supply range and programmable charging current in a compact 20-pin QFN package, designed for smart USB charging ports in consumer and industrial products.

The USB2513BI-AEZG is a 3-port USB 2.0 hub controller from Microchip, supporting High-Speed 480 Mbps operation with I2C and SMBus configuration. Housed in a 36-pin VQFN package, it serves industrial, embedded, and computing USB expansion designs.

Microchip USB3347-CP is a USB 2.0 ULPI transceiver supporting 1.8 V and 3.3 V I/O interfaces with a 26 MHz reference clock in a 24-pin QFN package. It bridges USB 2.0 High Speed, Full Speed, and Low Speed traffic to ULPI-compatible USB controllers. Suitable for portable devices, wireless modems, and embedded USB host and device designs.

The TC4428ACPA is a dual MOSFET gate driver from Microchip capable of sourcing and sinking 1.5 A peak current from a 4.5 V to 18 V supply. It features Schmitt trigger inputs and non-inverting plus inverting outputs in an 8-pin PDIP package for easy prototyping and through-hole designs.

The TC670ECHTR is a single-channel temperature-proportional fan controller IC from Microchip that adjusts fan speed based on measured temperature, eliminating discrete component fan control circuits, housed in a compact 6-pin SOT-23 package suitable for space-constrained server, networking, and embedded system thermal management designs.

Microchip TCM809LVLB713 is a single-channel voltage supervisor with a fixed threshold from 4.50 V to 4.75 V, designed to monitor 5 V supply rails and assert a reset signal when voltage drops out of range. It is housed in a tiny 3-pin SC-70 package for minimal board space in embedded systems.

Microchip TCM810MVLB713 is a single-channel voltage supervisor with a fixed reset threshold up to 4.5 V maximum, delivering an active-low push-pull reset output in a tiny 3-pin SC-70 package. It requires no external components and operates with very low quiescent current for battery-sensitive applications. Ideal for supervisory reset in microprocessor and FPGA power sequencing designs.

Microchip TC4431VPA is an inverting MOSFET gate driver delivering 1.5 A peak output current over a 4.5 V to 30 V supply range with Schmitt-trigger input for clean switching. It features rail-to-rail output swing and fast propagation delays in an 8-pin PDIP package, targeting power conversion, motor drive, and DC-DC converter gate-drive circuits.

The TC962EPA is a switched-capacitor voltage converter IC in an 8-pin DIP package, accepting an input voltage from 3 V to 18 V. It generates a regulated negative voltage output for powering op-amps and other dual-supply analog circuits. Ideal for portable instruments, battery-powered systems, and analog signal conditioning boards requiring a negative rail.

The PIC16F777-I/PT is a Microchip 8-bit PIC16F microcontroller running at up to 20 MHz with 14 KB flash memory and ADC capability. It features multiple analog and digital peripherals in a compact 44-pin TQFP package. Available from stock with worldwide shipping.

The TC7662BEPA is a switched-capacitor voltage converter IC from Microchip that generates a negative supply rail from a positive 1.5 V to 15 V input. It operates in an 8-pin DIP package, requires minimal external capacitors, and suits portable and battery-powered systems needing a dual-supply.

The TC962CPA is a switched-capacitor voltage converter IC that generates a regulated negative output voltage from a positive input supply ranging from 3 V to 18 V, housed in an 8-pin DIP package. It provides a simple charge-pump inversion solution requiring minimal external components for bipolar supply generation.

TC913BCPA is a precision chopper-stabilized operational amplifier from Microchip in an 8-pin DIP package, featuring ultra-low offset voltage, bias current of 0.00012 µA at 25°C, and common-mode rejection ratio of 110 dB typical, designed for high-precision analog signal conditioning.

Microchip TC4420CPA is a 6A peak-current MOSFET driver IC in an 8-pin DIP package with Schmitt-trigger input. It provides high-speed single-channel gate driving with up to 30V supply range and is RoHS compliant for industrial and power electronics designs.

Microchip TC7662AEPA is a switched-capacitor voltage converter in an 8-pin PDIP package, accepting input voltages from 3 V to 18 V and generating a regulated inverted output. Designed for applications needing a negative supply rail from a single positive source without an inductor.

Microchip PIC24F16KA102-I/SP is a 16-bit PIC24 microcontroller with 16KB Flash, 2KB RAM, and a rich analog/digital peripheral set in a 28-pin SPDIP package. It operates from 1.8 V at 8 MHz up to 3.6 V at 32 MHz, making it an excellent choice for low-power sensor applications. Available from stock worldwide for battery-powered and industrial embedded designs.

The TC7662ACPA is a switched-capacitor voltage converter from Microchip Technology that generates a negative output voltage from a positive input supply in the 3 V to 18 V range. It operates without inductors using external capacitors only and is housed in an 8-pin DIP package, suitable for analog signal conditioning and op-amp bias supplies.

High Peak Output Current: 13A (typical) • Low Shoot-Through/Cross-Conduction Current in Output Stage • Wide Input Supply Voltage Operating Range: - 4.5V to 18V • High Continuous Output Current: 2.6A (maximum) • Matched Fast Rise and Fall Times: - 21 ns with 10,000 pF Load - 42 ns with 22,000 pF Load • Matched Short Propagation Delays: 44 ns (typical) • Low Supply Current: - With Logic ‘1’ Input – 140 µA (typical) - With Logic ‘0’ Input – 40 µA (typical) • Low Output Impedance: 0.9 (typical)

The TC7660HEPA is a switched-capacitor voltage inverter IC from Microchip supporting 1.5 V to 10 V input, converting a positive supply to an equal-magnitude negative rail. It is housed in an 8-pin DIP package, needs only 2 external capacitors, and targets portable analog and op-amp dual-supply applications.

TC4422EPA is a high-speed, single-channel MOSFET driver IC from Microchip with Schmitt trigger input, capable of driving large gate capacitances. It features 9A peak output current and operates from a 4.5 V to 18 V supply in an 8-pin DIP package.

Microchip TC4432EPA is a 1.5 A inverting MOSFET gate driver with Schmitt trigger input, capable of driving large power MOSFETs with fast 25 ns rise and fall times from a 4.5 V to 18 V supply. Its 8-pin PDIP package is suitable for through-hole prototyping and motor-drive gate-drive stages.

Microchip TC74A2-3.3VCTTR is a tiny serial digital temperature sensor operating from a 3.3 V supply, communicating over a 2-wire I2C-compatible interface with 1°C resolution. It measures temperatures from -40°C to +125°C, delivering readings as an 8-bit digital value. Housed in a compact 5-pin SOT-23 package, ideal for space-constrained thermal monitoring applications.

The Microchip TC74A0-3.3VAT is a simple I2C-compatible digital temperature sensor that reports temperature as an 8-bit digital word via a 2-wire serial interface, operating from a 3.3 V supply. With ±2°C accuracy over 0°C to 125°C and a 5-pin TO-220 package, it suits embedded thermal monitoring in space-constrained designs.

The TC74A0-5.0VAT is a serial digital temperature sensor from Microchip that communicates over a 2-wire I2C-compatible interface and operates from a 5.0 V supply. It provides 8-bit temperature resolution over the -40°C to +125°C range in a 5-pin TO-220 package, offering simple thermal monitoring for embedded systems and power supply designs.

TC7109ACKW is a 12-bit dual-slope integrating ADC from Microchip with differential input range of -3.5 V to 3.5 V and 0.024% maximum linearity error, offering high-accuracy analog-to-digital conversion for precision measurement applications in a 44-pin PQFP package.

The TC7107CPL is a 3.5-digit dual-slope ADC with differential input, accepting analog voltages from 2.7 V to 3.35 V, featuring direct LED display drive capability, housed in a 40-pin PDIP package for panel meters and bench instrumentation designs.

TC4426COA is a dual 1.5 A MOSFET driver from Microchip with Schmitt trigger inputs, rated for 4.5 V to 18 V supply, available in SOIC-8 package for low-side gate drive applications.

Microchip TC4425AVPA is a dual-channel MOSFET gate driver with Schmitt trigger inputs, capable of sourcing and sinking 1.5 A peak output current at up to 18 V supply in an 8-pin PDIP package, designed for high-speed power conversion, motor control, and inverter gate-drive applications.

The TC4424AVPA is a dual MOSFET gate driver capable of sourcing and sinking 3 A peak current, featuring Schmitt trigger inputs and high-side driver capability, packaged in PDIP-8 for efficient power switching applications.

Microchip TC4424EPA is a dual 3 A MOSFET gate driver with Schmitt trigger inputs and inverting/non-inverting buffer outputs in an 8-pin PDIP package. It drives high-side and low-side MOSFETs with fast switching for DC-DC converters, motor drives, and high-frequency switching circuits. RoHS-compliant with a 16-week factory lead time for production planning.

The TC500CPE is a precision analog signal conditioning IC from Microchip featuring a dual-supply architecture with ±5 V nominal operation, designed for instrumentation amplifier and precision analog front-end circuits, housed in a 16-pin PDIP through-hole package for industrial measurement and data acquisition applications.

Microchip TC664 is a PWM fan speed controller IC featuring automatic speed control and 2-wire fan interface in a compact 10-pin MSOP package. It provides thermal management control with analog temperature input and duty-cycle output suitable for cooling fan regulation in embedded systems.

Microchip TC4432CPA is a non-inverting single MOSFET gate driver capable of sourcing and sinking 1.5 A peak current with a supply range of 4.5 V to 30 V in an 8-pin PDIP package. Its Schmitt-trigger input and high-side drive capability make it suitable for power switching and motor-drive circuits.

Microchip TC1426CPA is a dual MOSFET gate driver IC capable of sourcing and sinking 1.5 A peak current, operating from a 4.5 V to 18 V supply in an 8-pin DIP package. It provides non-inverting buffer-based drive for power MOSFETs and IGBTs in switching power supplies, motor drives, and DC-DC converters.

Microchip TC4426AEPA is a dual-channel inverting MOSFET gate driver IC capable of 1.5A peak current per channel, operating from 4.5V to 18V. It features Schmitt-trigger inputs for noise immunity and is housed in an 8-pin PDIP package, ideal for high-frequency power conversion and motor drive circuits.