Microchip

The TC7662ACPA is a switched-capacitor voltage converter from Microchip Technology that generates a negative output voltage from a positive input supply in the 3 V to 18 V range. It operates without inductors using external capacitors only and is housed in an 8-pin DIP package, suitable for analog signal conditioning and op-amp bias supplies.

High Peak Output Current: 13A (typical) • Low Shoot-Through/Cross-Conduction Current in Output Stage • Wide Input Supply Voltage Operating Range: - 4.5V to 18V • High Continuous Output Current: 2.6A (maximum) • Matched Fast Rise and Fall Times: - 21 ns with 10,000 pF Load - 42 ns with 22,000 pF Load • Matched Short Propagation Delays: 44 ns (typical) • Low Supply Current: - With Logic ‘1’ Input – 140 µA (typical) - With Logic ‘0’ Input – 40 µA (typical) • Low Output Impedance: 0.9 (typical)

The TC7660HEPA is a switched-capacitor voltage inverter IC from Microchip supporting 1.5 V to 10 V input, converting a positive supply to an equal-magnitude negative rail. It is housed in an 8-pin DIP package, needs only 2 external capacitors, and targets portable analog and op-amp dual-supply applications.

TC4422EPA is a high-speed, single-channel MOSFET driver IC from Microchip with Schmitt trigger input, capable of driving large gate capacitances. It features 9A peak output current and operates from a 4.5 V to 18 V supply in an 8-pin DIP package.

Microchip TC4432EPA is a 1.5 A inverting MOSFET gate driver with Schmitt trigger input, capable of driving large power MOSFETs with fast 25 ns rise and fall times from a 4.5 V to 18 V supply. Its 8-pin PDIP package is suitable for through-hole prototyping and motor-drive gate-drive stages.

Microchip TC74A2-3.3VCTTR is a tiny serial digital temperature sensor operating from a 3.3 V supply, communicating over a 2-wire I2C-compatible interface with 1°C resolution. It measures temperatures from -40°C to +125°C, delivering readings as an 8-bit digital value. Housed in a compact 5-pin SOT-23 package, ideal for space-constrained thermal monitoring applications.

The Microchip TC74A0-3.3VAT is a simple I2C-compatible digital temperature sensor that reports temperature as an 8-bit digital word via a 2-wire serial interface, operating from a 3.3 V supply. With ±2°C accuracy over 0°C to 125°C and a 5-pin TO-220 package, it suits embedded thermal monitoring in space-constrained designs.

The TC74A0-5.0VAT is a serial digital temperature sensor from Microchip that communicates over a 2-wire I2C-compatible interface and operates from a 5.0 V supply. It provides 8-bit temperature resolution over the -40°C to +125°C range in a 5-pin TO-220 package, offering simple thermal monitoring for embedded systems and power supply designs.

TC7109ACKW is a 12-bit dual-slope integrating ADC from Microchip with differential input range of -3.5 V to 3.5 V and 0.024% maximum linearity error, offering high-accuracy analog-to-digital conversion for precision measurement applications in a 44-pin PQFP package.

The TC7107CPL is a 3.5-digit dual-slope ADC with differential input, accepting analog voltages from 2.7 V to 3.35 V, featuring direct LED display drive capability, housed in a 40-pin PDIP package for panel meters and bench instrumentation designs.

TC4426COA is a dual 1.5 A MOSFET driver from Microchip with Schmitt trigger inputs, rated for 4.5 V to 18 V supply, available in SOIC-8 package for low-side gate drive applications.

Microchip TC4425AVPA is a dual-channel MOSFET gate driver with Schmitt trigger inputs, capable of sourcing and sinking 1.5 A peak output current at up to 18 V supply in an 8-pin PDIP package, designed for high-speed power conversion, motor control, and inverter gate-drive applications.

The TC4424AVPA is a dual MOSFET gate driver capable of sourcing and sinking 3 A peak current, featuring Schmitt trigger inputs and high-side driver capability, packaged in PDIP-8 for efficient power switching applications.

Microchip TC4424EPA is a dual 3 A MOSFET gate driver with Schmitt trigger inputs and inverting/non-inverting buffer outputs in an 8-pin PDIP package. It drives high-side and low-side MOSFETs with fast switching for DC-DC converters, motor drives, and high-frequency switching circuits. RoHS-compliant with a 16-week factory lead time for production planning.

The TC500CPE is a precision analog signal conditioning IC from Microchip featuring a dual-supply architecture with ±5 V nominal operation, designed for instrumentation amplifier and precision analog front-end circuits, housed in a 16-pin PDIP through-hole package for industrial measurement and data acquisition applications.

Microchip TC664 is a PWM fan speed controller IC featuring automatic speed control and 2-wire fan interface in a compact 10-pin MSOP package. It provides thermal management control with analog temperature input and duty-cycle output suitable for cooling fan regulation in embedded systems.

Microchip TC4432CPA is a non-inverting single MOSFET gate driver capable of sourcing and sinking 1.5 A peak current with a supply range of 4.5 V to 30 V in an 8-pin PDIP package. Its Schmitt-trigger input and high-side drive capability make it suitable for power switching and motor-drive circuits.

Microchip TC1426CPA is a dual MOSFET gate driver IC capable of sourcing and sinking 1.5 A peak current, operating from a 4.5 V to 18 V supply in an 8-pin DIP package. It provides non-inverting buffer-based drive for power MOSFETs and IGBTs in switching power supplies, motor drives, and DC-DC converters.

Microchip TC4426AEPA is a dual-channel inverting MOSFET gate driver IC capable of 1.5A peak current per channel, operating from 4.5V to 18V. It features Schmitt-trigger inputs for noise immunity and is housed in an 8-pin PDIP package, ideal for high-frequency power conversion and motor drive circuits.

Microchip TC1426COA is a dual-channel MOSFET gate driver with buffer/inverter topology, standard input logic compatibility, and two drive functions in an 8-pin SOIC package for fast MOSFET switching in power conversion designs.

Microchip TC4423CPA is a dual-channel MOSFET gate driver with 3 A peak output current, Schmitt-trigger inputs, and high-side drive support in an 8-pin PDIP package. Operates across a wide supply range and delivers fast switching for power converters, motor drives, and bridge circuits.

The TC4426AVOA is a dual non-inverting MOSFET gate driver from Microchip with Schmitt trigger inputs and high-side drive capability. It delivers 1.5 A peak output current from a 4.5 V to 18 V supply in an SOIC-8 package, suitable for synchronous rectifiers, DC-DC converters, and motor H-bridge designs.

The TC1427CPA is a dual MOSFET gate driver with non-inverting and inverting outputs capable of sourcing and sinking 1.2 A peak current. It features high-speed switching with matched propagation delays for synchronous and half-bridge topologies. Available in an 8-pin PDIP package for through-hole power converter designs.

TC4425AVOA is a dual 1.5 A MOSFET gate driver IC from Microchip with Schmitt trigger inputs, 4.5 V to 18 V supply range, and non-inverting buffer topology, packaged in an 8-pin SOIC for high-speed switching power supply and motor drive gate-drive applications.

The Microchip TC1300R-3.3VUA is a fixed 3.3 V, 300 mA low-dropout linear regulator with a typical dropout voltage of only 210 mV, accepting input voltages from 4.3 V to 6 V. Featuring Pb-free construction in an MSOP-8 package, it is well-suited for low-power 3.3 V supply rails in portable and consumer electronics designs.

Microchip TC429CPA is a single non-inverting MOSFET gate driver with Schmitt trigger input in an 8-pin DIP package, capable of sourcing and sinking high peak currents for fast power MOSFET switching. It delivers robust gate drive for power conversion, motor control, and switching regulator circuits operating from 4.5 V to 18 V supply rails. The device suits through-hole prototype boards and low-volume production requiring reliable MOSFET drive.

TC428CPA is a dual MOSFET gate driver from Microchip capable of sourcing and sinking 1.5 A peak gate current, operating from 4.5 V to 18 V supply, with high-side drive capability in an 8-pin PDIP package, ideal for power converter and motor drive gate drive stages.

Microchip TC1411EOA is an inverting MOSFET gate driver delivering 1 A peak output current over a 4.5 V to 16 V supply range with a Schmitt-trigger input for clean noise rejection. It features rail-to-rail output swing and fast propagation delays in an 8-pin SOIC package, targeting DC-DC converter gate drives, motor control stages, and relay driver circuits.

Microchip PIC18F4580-I/P, 8bit PIC Microcontroller, 40MHz, 32 kB, 256 B Flash, 40-Pin PDIP

The TC1107-3.3VOA is a fixed-output 3.3 V low-dropout LDO voltage regulator from Microchip with a 270 mV nominal dropout voltage and an input range of 4.3 V to 6 V. It provides stable 3.3 V regulation in an 8-pin SOIC package, suitable for powering microcontrollers, memory, and mixed-signal circuits in consumer electronics and industrial equipment.

TC427CPA is a dual high-speed MOSFET gate driver with inverting and non-inverting outputs capable of sourcing and sinking 1.5 A peak in an 8-pin DIP package, designed for driving power switches in switching power supplies and motor drives.

Microchip TC14433EPG is a 3.5-digit dual-slope integrating ADC designed for high-accuracy DC voltage measurement. It accepts analog input voltages up to 0.2 V with 0.05% linearity error and operates from dual ±5 V supplies. Housed in a 24-pin PDIP package, it suits digital panel meters, handheld multimeters, and precision measurement instruments.

Microchip TC2117-3.3VDBTR is a fixed 3.3 V LDO linear regulator with 0.45 V typical dropout voltage, 6 V maximum input, and up to 800 mA output current, available in a 4-pin SOT-223 tape-and-reel package.

Microchip PIC18F8490-I/PT is an 8-bit PIC18 microcontroller in TQFP-80 package with 20 MHz max clock frequency and ADC functionality. Available worldwide with fast shipping.

Microchip TC1016-3.0VCTTR is a fixed 3.0 V low-dropout linear regulator with 150 mA output capability and only 0.15 V typical dropout in a compact 5-pin SOT-23 package. Supports input voltages from 4 V to 6 V, making it well-suited for USB-powered and battery-powered embedded applications.

The TC1265-3.3VOA is a fixed 3.3 V LDO linear regulator from Microchip with a nominal 0.45 V dropout voltage and up to 6 V input range. Packaged in an 8-pin SOIC, it provides a stable regulated 3.3 V output for microcontrollers, FPGAs, and logic supply rails in space-efficient surface-mount designs.

Use the download button to access the SST26VF032B-104I/MF schematic symbol, PCB footprint, and 3D model.

Photo smoke detector with alarm memory

Microchip SST11CP16-QXCE, RF Amplifier Power, 30 dB 2-channel 5.9 GHz, 16-Pin XQFN

Microchip PIC16F18345-I/GZ is an 8-bit PIC microcontroller with 32 MHz maximum clock, 14 kB Flash, and integrated ADC and DAC peripherals. It operates from 2.3 V minimum at 16 MHz and is housed in a compact 20-pin UQFN package. Suitable for cost-sensitive embedded control, sensor interfacing, and low-power IoT edge nodes.

TC1262-3.3VAB is a fixed 3.3 V low dropout linear regulator by Microchip housed in a TO-220-3 package, accepting inputs from 4.3 V to 6 V and offering a typical dropout voltage of only 350 mV. It delivers stable 3.3 V regulated output with up to 500 mA output current for powering digital logic and embedded processors. Suited for 5 V to 3.3 V conversion in industrial boards, embedded computers, and power supply modules.

Microchip TC1014-2.7V is a fixed 2.7 V output LDO linear voltage regulator delivering up to 50 mA output current with only 120 mV maximum dropout voltage. It accepts 2.7 V to 6 V input range and is housed in a compact 5-pin SOT-23 package for low-power portable and battery-operated applications.

Microchip TC1410NEOA is a 3 A non-inverting MOSFET gate driver with Schmitt trigger input housed in an 8-pin SOIC package, operating from 4.5 V to 18 V supply with propagation delays below 40 ns. It drives large power MOSFETs in motor control, half-bridge inverters, and switched-mode power supplies requiring high peak gate current.

TC1240ECHTR is a switched-capacitor charge pump voltage doubler from Microchip that delivers up to 50 mA output current at a 125 kHz switching frequency, accepting 2.5 V to 5.5 V input and providing a doubled output up to 9 V, packaged in a compact 6-pin SOT-23 for space-constrained portable applications.

Use the download button to access the SST39LF800A-55-4C-EKE schematic symbol, PCB footprint, and 3D model.

TFBGA-48

TC1232CPA is a single-channel voltage supervisor and microprocessor reset IC from Microchip with an adjustable threshold, housed in an 8-pin PDIP package, providing reliable power-on reset and brownout detection for embedded systems and industrial control equipment.

The TC1187VCT713 is an adjustable low-dropout (LDO) linear voltage regulator from Microchip Technology, delivering up to 150 mA output current with an output range of 1.165 V to 5.5 V. It features a typical dropout voltage of only 0.27 V and is housed in a compact 5-pin SOT-23 package for space-sensitive battery-powered designs.

TC1014-3.3VCT713 is a fixed 3.3 V LDO linear regulator from Microchip with a maximum dropout voltage of 120 mV and an input range of 4.3 V to 6 V. It is housed in a 5-pin SOT-23 package, making it ideal for battery-powered devices and portable electronics requiring a stable low-dropout power supply.

TC1108-3.3VDBTR is a fixed 3.3 V LDO voltage regulator from Microchip with 800 mA output current, a 0.24 V typical dropout voltage, 4.3 V to 6 V input range, and a compact SOT-223-3 surface-mount package for space-constrained power rails.