TCM810MVLB713 Microchip Integrated Circuit (Other) In Stock
Microchip TCM810MVLB713 is a single-channel voltage supervisor with a fixed reset threshold up to 4.5 V maximum, delivering an active-low push-pull reset output in a tiny 3-pin SC-70 package. It requires no external components and operates with very low quiescent current for battery-sensitive applications. Ideal for supervisory reset in microprocessor and FPGA power sequencing designs.
- Manufacturer
- Microchip
- Package
- Other
- Pin Count
- 3
- Lifecycle
- ACTIVE
- Datasheet
- TCM810MVLB713 Datasheet PDF
- Category
- Integrated Circuit
- Price
- From $0.1673(MOQ 1)
- Temp Range
- -40.0°C to 125.0°C
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
Key Features
- Fixed-threshold voltage supervisor monitoring supplies up to 4.5 V maximum
- Active-low push-pull RESET output requiring no external pull-up resistor
- Miniature 3-pin SC-70 package — smaller than SOT-23 for ultra-compact designs
- No external components required for complete reset supervisory function
- RoHS-compliant lead-free construction meeting JESD-609 e3 standard
Applications
TCM810MVLB713 is used to guarantee a clean power-on reset for microcontrollers and FPGAs in battery-powered IoT sensors, wearable devices, and handheld instruments operating from regulated 3.3 V or 5 V supply rails. Its SC-70 package is smaller than the equivalent SOT-23-3 part, enabling circuit designers to fit the supervisor function into extremely space-constrained PCB areas near the processor reset pin.
Specifications
| Pbfree Code | Yes |
| Manufacturer Package Code | SC70-3 |
| Factory Lead Time | 7Weeks |
| YTEOL | 8 |
| Adjustable Threshold | NO |
| Analog IC - Other Type | VOLTAGE SUPERVISOR/RESET IC |
| JESD-30 Code | R-PDSO-G3 |
| JESD-609 Code | e3 |
| Number of Channels | 1 |
| Number of Functions | 1 |
| Package Body Material | PLASTIC/EPOXY |
| Package Equivalence Code | TSSOP3/6,.08 |
| Package Shape | RECTANGULAR |
| Package Style | SMALL OUTLINE, THIN PROFILE, SHRINK PITCH |
| Peak Reflow Temperature (Cel) | 260 |
| Qualification Status | Not Qualified |
| Screening Level | TS 16949 |
| Supply Current-Max (Isup) | 0.03mA |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 1V |
| Supply Voltage-Nom (Vsup) | 5V |
| Surface Mount | YES |
| Technology | CMOS |
| Temperature Grade | AUTOMOTIVE |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Form | GULL WING |
| Terminal Pitch | 0.65mm |
| Terminal Position | DUAL |
| Threshold Voltage-Nom | +4.38V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Package | Other |
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
| Moisture Sensitivity Level | MSL 1 |
| ECCN | EAR99 |
| HTS Code | 8542.39.00.01 |
| Country of Origin | Malaysia, Thailand |
Alternate & Equivalent Parts
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
What is the maximum monitored supply voltage for TCM810MVLB713, and does it suit 3.3 V regulator supervision?
TCM810MVLB713 supports a maximum input supply voltage of 4.5 V, making it well-matched for supervising standard 3.3 V regulated rails with typical overshoot headroom. The fixed reset threshold is set internally near the 3.3 V nominal level, asserting RESET when the supply drops below the programmed threshold without any external resistors.
How does the SC-70-3 package of TCM810MVLB713 compare to SOT-23-3 equivalents in board space savings?
The SC-70-3 package measures approximately 2.0 mm × 1.25 mm, which is about 40% smaller in footprint area than a standard SOT-23-3 package at 2.9 mm × 1.6 mm. This difference can be significant in wearable or miniature IoT devices where the supervisor must be placed within 5 mm of the MCU reset pin with no additional clearance budget.
Does TCM810MVLB713 require any external passive components to function as a complete reset supervisory circuit?
No external components are required — TCM810MVLB713 integrates the reference, comparator, and reset pulse timer in a single 3-pin device. Connecting VCC, GND, and RESET to the microcontroller reset pin completes the supervisory function, eliminating the RC network or external reference resistors needed by discrete implementations and reducing assembly cost for high-volume PCBs.
What is the factory lead time for TCM810MVLB713, and should buyers stock safety buffer quantities?
Microchip lists a 7-week factory lead time for TCM810MVLB713. Given that this is a specialized SC-70 voltage supervisor with limited distributor stock depth, production buyers ordering quantities above 10,000 units should consider maintaining 4 to 8 weeks of safety stock to avoid line stoppages during any demand surge or allocation period.
Related Guides
How to Choose a BAS70 Schottky Diode for Signal Clamping: Selection Guide
A practical BAS70KFILM and BAS70-family Schottky diode selection guide for signal clamping, RF detection, leakage, and topology choices.
Jul 4, 2026
AMC1202DWVR Design Guide for Isolated Current Sensing
Practical AMC1202DWVR design guide covering shunt sizing, isolation layout, input filtering, ADC scaling, and sourcing choices.
Jul 4, 2026
1206 100 uF MLCC Design Guide for Compact Bulk Decoupling
Design guidance for applying CL31A107MQHNNNE and related 1206 MLCCs in compact bulk decoupling networks.
Jul 3, 2026
0402 10 nF MLCC Design Guide for High-Speed Decoupling
Practical design guidance for using CL05B103KB5NNNC and related 0402 MLCCs in high-speed decoupling networks.
Jul 3, 2026
Why Buy from FindMyChip
About Microchip
Microchip is a leading electronic component manufacturer. FindMyChip sources Microchip ICs directly from authorized China distributors, offering competitive pricing and reliable stock.
| Qty. | Unit Price | Ext. Price |
|---|---|---|
| 1+ | $0.4600 | $0.46 |
| 25+ | $0.4150 | $10.38 |
| 250+ | $0.2059 | $51.48 |
| 500+ | $0.1802 | $90.10 |
| 1000+ | $0.1673 | $167.30 |
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“Response time is incredible — usually under 4 hours. They understand that production lines can't wait.”