Analog Devices

MAX4231ART+ is a single-channel general-purpose operational amplifier with ultra-low bias current (1 pA typical at 25°C) and 70 dB typical CMRR in a tiny 6-ball UCSP package. It features voltage-feedback architecture with frequency compensation, suited for precision sensor interfaces and portable measurement circuits.

RS-422 Interface IC +/-15kV ESD-Protected, 3.3V Quad RS-422 Transmitters

MAXIM INTEGRATED PRODUCTS - MAX3841ETG+ - Crosspoint Switch, 2x2 Array, Serial, +3 V to +3.6 V, TQFN-24

The MAX326CEE+T is a quad single-pole single-throw (SPST) analog switch from Analog Devices, providing four independent switching channels in a compact 16-pin QSOP package. It supports dual supplies up to ±18 V (nominal ±15 V) for wide analog signal range switching in precision instrumentation and test equipment. Available through global distribution with RoHS-compliant lead-free construction.

MAX3397EELA+ is a dual bidirectional voltage-level translator in a 2x2x0.75 mm µDFN-8 package, supporting low-voltage logic-level shifting with open-drain outputs and up to 1000 ns propagation delay. It enables seamless signal translation between different voltage domains in mixed-supply PCB designs. Ideal for I2C, SPI, and GPIO level-shifting in portable, IoT, and battery-powered systems.

The MAX2650EUS+T is a DC-to-microwave low-noise amplifier from Analog Devices operating from a +5 V supply with 16.5 dB gain and 50 Ω characteristic impedance in a compact 4-pin SOT-143 package. It supports maximum input power of 13 dBm and is designed for wideband RF signal amplification from DC to microwave frequencies.

The MAX20075ATCB/V+T is a 36 V input, 600 mA / 1.2 A synchronous mini buck converter with current-mode PWM control in a compact 12-pin 3x3 mm LFCSP package. It accepts inputs from 3.5 V to 36 V, targeting automotive, industrial, and distributed power rails requiring a small, efficient step-down regulator.

Digital Isolator CMOS 4-CH 150Mbps 16-Pin SOIC W Tube

MAX320CUA+T is a precision, dual-supply SPST analog CMOS switch in an 8-pin Mini-SO package. It operates from dual supplies up to ±8 V and is designed for low on-resistance, high-accuracy signal routing in instrumentation, data acquisition, and audio switching circuits.

The MAX2674EWT+ is a GPS/GNSS low-noise amplifier integrating an antenna switch and active bias circuit in a 6-ball WLP package. It delivers high gain and low noise figure optimized for 1575 MHz GPS L1 band reception, targeting compact portable navigation, asset-tracking, and IoT devices.

MAX2650EUS+ is a DC-to-microwave low-noise amplifier from Analog Devices covering 800 MHz to 1000 MHz in a compact SOT-143 package. It delivers 16.5 dB gain with 50 ohm characteristic impedance and operates from a +5 V supply. Ideal for cellular RF front ends, GPS receivers, and wideband amplifier chains requiring low noise at L-band and UHF frequencies.

Analog Devices MAX2661EUT+ is a high-frequency upconverter mixer IC supporting IF input frequencies from 40 MHz to 500 MHz with a 50 Ω characteristic impedance, packaged in a compact 6-pin SOT-23 surface-mount package. It is designed for wireless transmitter up-conversion stages in portable radio, ISM band, and telemetry applications.

The MAX2550ETN+ is a highly integrated WCDMA femtocell transceiver supporting Band I, V, and VIII with simultaneous GSM monitoring capability. It combines transmit and receive paths for indoor cellular coverage base station designs. Available in a compact QFN package targeting femtocell access points and small cell base station applications.

Analog Devices MAX253EUA+T is a 1 W primary-side H-bridge transformer driver for generating isolated DC-DC supply voltages. It drives a transformer with an H-bridge output stage in a compact 8-pin SOIC package, enabling galvanic isolation in RS-485, CAN bus, and industrial interface circuits.

36V, 600mA/1.2A Mini Buck Converter

Automotive Low-Voltage 2-Channel Step-Down Controller

MAX17270ENE+ is a Analog Devices power management IC for regulated supplies and battery-powered products. It combines 16 pins, 16-WLCSP-N/A, -40°C to 85°C for reliable board-level integration. Quote-based sourcing supports stock checks and worldwide shipping.

HMC311LP3 is a IC RF AMP GP 0HZ-6GHZ 16SMT by Analog Devices. Key specs: 16 pins, -40°C to 85°C, 0HZ. From inquiry pricing, available through FindMyChip sourcing with worldwide shipping.

The MAX17050X+ is a 1-cell Li-ion battery fuel gauge IC using the ModelGauge m3 algorithm for accurate state-of-charge estimation, available in a tiny 9-bump WLCSP package for space-critical portable and wearable designs.

The MAX1763EUE+T is a 1.5 A low-noise 1 MHz PWM step-up DC-DC converter from Analog Devices operating from an input voltage as low as 1.1 V up to 5.5 V. It uses voltage-mode PWM control and comes in a 16-pin TSSOP with exposed pad for thermal relief in portable and battery-backed boost applications.

Analog Devices MAX17510ATB+ is a low-voltage DDR linear regulator with 0.015% maximum load regulation and a single output in a compact 10-pin 3x3 mm LFCSP package, ideal for precise DDR memory power supply rails. Available worldwide with fast shipping.

IC SUPERVISOR 1 CHANNEL 8TDFN

RF Amplifier x2 Active mult SMT, 9 - 16 GHz Fout

iency. The VDDQ output voltage can be set to a preset 1.8V or 1.5V, or be adjuste

DS2502X1+U is a Analog Devices integrated circuit for industrial electronics. It offers 2 pins, supporting reliable assembly in compact electronic equipment. From quote-based pricing, request stock for worldwide shipping.

ADP151AUJZ-3.3-R7/BKN is a Linear Voltage Regulator IC Positive Fixed 1 Output 200mA TSOT-23-5 for electronic system designs. Key details include 5 pins in SOT23 (5-Pin) from Analog Devices. It supports industrial power rails, embedded control boards, instrumentation supplies, and maintenance replacement builds with worldwide sourcing support.

Real Time Clock 3V/5V Real-Time Clock

MAXIM INTEGRATED PRODUCTS - DS2430AP+ - EEPROM, 256 bit, 32 x 8bit, Serial 1-Wire, TSOC, 6 Pins

IC OPAMP CFA 1 CIRCUIT 8SO

IC ADDRESSABLE SWITCH 6TSOC

5 Volt and 3.3 Volt MicroMonitor

Supervisory Circuits 3.3V and 5.0V MicroMonitor

0.150 INCH, LEAD FREE, PLASTIC, SOP-14

Voltage References 1uA Precision SOT-23 Reference 10ppm, 0.05%

LTC2858IMS-2#TRPBF is an Analog Devices RS-485/RS-422 full-duplex line transceiver operating at 5 V with up to 250 kbps data rate, featuring differential Schmitt-trigger inputs and driver enables, in a 10-pin MSOP package for robust industrial serial communication links.

MAXIM INTEGRATED PRODUCTS - MAX4514EUK+T - Analogue Switch, 1 Channels, SPST, 5 ohm, 2V to 12V, SOT-23, 5 Pins

Temperature Sensor Analog, Local -25°C ~ 105°C TO-92-3

GaAs, pHEMT, MMIC, Single Positive Supply,??DC to 10 GHz Power Amplifier

Linear Voltage Regulator IC Positive or Negative Adjustable 1 Output 3A 5-DDPAK

Hot Swap Voltage Controllers High Voltage Current Limit

Multi-Phase Current Mode Step-Up DC/DC Controller

MAX22700DASA+ is an ultra-high CMTI isolated gate driver IC from Analog Devices with a 5.7 A peak output current in an 8-pin SOIC package. It provides high-side MOSFET driving capability with differential Schmitt-trigger inputs for robust noise immunity across isolation barriers. Designed for inverters, motor drives, and power converters demanding fast, reliable gate switching in high-voltage environments.

The LT1767EMS8E-5 is a 1.5 A, 1.25 MHz monolithic buck switching regulator from Analog Devices (Linear Technology) with a fixed 5 V output and 3 V to 25 V input range in an 8-pin MSOP package. It uses constant-frequency current-mode control for stable operation. Available in stock with worldwide shipping.

IC OPAMP GP 1 CIRCUIT 8SO

Complete DDR2 and DDR3 Power-Management Solution

50ppm/°C (max) Temperature Coefficient Guaranteed over the -40°C to +125°C Temperature RangeUltra-Small 3-Pin SC70 Package0.1% (max) Initial AccuracyWide Operating Current Range: 60µA to 15mALow 28µVRMS Output Noise (10Hz to 10kHz)1.225V, 2.048V, 2.500V, 3.000V, 3.3V, 4.096V, and 5.000V Fixed Reverse Breakdown VoltagesNo Output Capacitors RequiredTolerates Capacitive LoadsAEC-Q100 Qualified, Refer to Ordering Information for the Specific /V Versions

Analog Devices MAX17220ENT+ is a nanoPower synchronous boost converter accepting 0.4 V to 5.5 V input and regulating output from 1.8 V to 5 V with pulse-frequency-modulation control and true shutdown in a 6-bump WLCSP. Available from stock with worldwide shipping.

The MAX1609EEE+T is an octal SMBus-to-parallel I/O expander from Analog Devices providing 8 bidirectional I/O lines via a 2-wire SMBus interface. In a 16-pin QSOP package, it is used to expand GPIO resources on microcontroller-based systems with minimal bus wiring.

Switching Voltage Regulators 36V, 2.2MHz Step-Down Converter with Low Operating Current

MAX17000ETG+ is a complete DDR2 and DDR3 power-management IC from Analog Devices (Maxim) integrating a PWM step-down controller, VTT termination regulator, and voltage supervisors. It accepts a 3 V to 26 V input, supports adjustable output from 1 V to 2.5 V, and comes in a compact 24-pin LFCSP package for server and networking memory rails.