Analog Devices

1.5MHz, 600mA Synchronous Step-Down Regulator in ThinSOT

BIAS GENERATOR, BOOST/LDO, QFN-24 Dual-Channel Low Noise Bias Generators

Instrumentation Amplifiers Hi Speed, Prec, JFET In Instr Amp (Fixed

Analog Devices LTC6810HG-2 is a 6-channel high-voltage battery stack monitor IC supporting up to 44 pins in an SOIC package, measuring cell voltages with 16-bit resolution across a wide temperature range for battery management systems.

Analog Devices LTC4440EMS8E#PBF High Side MOSFET Power Driver, 2.4A 8-Pin, MSOP

Driver 1.1A 1-OUT High Side Full Brdg Non-Inv Automotive 8-Pin MSOP EP T/R

Digital to Analog Converters - DAC 12-Bit 50Msps DAC

Driver 2.4A 1-OUT High Side Full Brdg Inv 8-Pin MSOP EP Tube

Driver 1.1A 1-OUT High Side Full Brdg Non-Inv Automotive 8-Pin MSOP EP T/R

Gate Drivers Fast 65V Protected High-Side NMOS Static Switch Driver

Driver 1.1A 1-OUT High Side Full Brdg Non-Inv Automotive 8-Pin MSOP EP Tube

Voltage References 1.5ppm/ C Drift, Low Noise, Buffered Reference

ANALOG DEVICES - HMC595AE - RF SWITCH, SPDT, 3GHZ, SOT-26-6

SMT GaAs HBT MMIC Divide-by-5, DC - 7 GHz

LTC6259IMS8#PBF is a Analog Devices integrated circuit for automotive, industrial, and embedded control designs. It uses a 8-pin TSSOP package with protected driver functions. From RFQ pricing with stock checks and worldwide shipping.

Voltage References 3ppm/ C Drift, Low Noise, Buffered Reference

42V, 6A Synchronous Step-Down Silent Switcher 2 with 2.5μA Quiescent Current

RF Development Tools HMC406MS8G Evaluation PCB

Conv DC-DC 7.5V to 36V Step Down Single-Out 0.8V 1.2A Automotive 8-Pin MSOP EP T/R

The LT3663IMS8E-5#TRPBF is an automotive-grade step-down DC-DC switching regulator that converts 7.5 V–36 V input to a fixed 5 V output at up to 1.2 A. It uses constant-frequency current-mode control in a compact MSOP-8 exposed-pad package. Ideal for 12 V automotive, industrial, and transportation systems requiring a reliable 5 V rail.

42V, 6A Synchronous Step-Down Silent Switcher 2 with 2.5μA Quiescent Current

RF Amp Single Power Amp 6GHz 5.5V 8-Pin MSOP EP T/R

Processor Supervisor 3.085V/4.675V/Adj 3 Active Low/Open Drain Automotive 8-Pin MSOP T/R

Digital Isolator CMOS 3-CH 150Mbps 16-Pin SOIC W Tube

Analog Devices LT6654AMPS6-3.3 is a high-voltage, high-current three-terminal voltage reference with a precise 3.3 V output in a compact SOT-23 6-pin package. It offers tight output voltage tolerance from 3.29241 V to 3.30759 V. Available worldwide in tape-and-reel packaging.

Analog to Digital Converters - ADC 12-Bit, 5Msps Serial SAR ADC with 20ppm/ C (Max) Internal Reference in TSOT-8

The LTC2992HMS-1#PBF is a dual wide-range power monitor IC from Analog Devices, measuring voltage, current, and power across two channels with an inverted SDAO output. It supports 2.7 V to 100 V input range, I2C interface, and 12-bit ADC resolution. Ideal for system power management, industrial monitoring, and server power distribution.

105V, 2.3A Low EMI Synchronous Step-Down Regulator with PassThru

Monitor 2.7V to 100V Automotive 16-Pin DFN EP Tube

Analog Devices LT3990EMSE-5#TRPBF is an automotive-grade 62V input, 5V/350mA step-down DC/DC converter with current-mode PWM control, AEC-Q100 qualification, and a 16-pin MSOP-EP package for wide-input vehicle and industrial power rails.

Voltage References Precision Low Drift Voltage Reference

Audio Amp Speaker 2-CH Stereo 3.2W Class-D 16-Pin WLCSP T/R

Buck Switching Regulator IC Positive Adjustable 1V 1 Output 2.3A 36-WFQFN, 26 Leads, Exposed Pad

LDO Regulator Pos 5V 0.5A Automotive 8-Pin SOIC N Tube

Analog to Digital Converters - ADC 16-bit, 20Msps, 1.8V Low Noise Dual ADC, Serial LVDS Outputs

100kHz, 5A, 2.5A and 1.25A High Efficiency Switching Regulators

Analog Devices LT3990EMSE-5#PBF is a 60V, 350mA current-mode PWM step-down regulator with ultralow 2µA quiescent current and integrated diodes, operating from 4.2V to 62V input in a 16-pin MSOP package.

LDO Voltage Regulators 3A, Fast Transient Response, Low Noise, LDO Regulators

Operational Amplifiers - Op Amps Dual 1.3MHz 23uA Power Efficient RRIO Op Amp

LT1172CQ#PBF is a high-power DC-DC switching regulator from Analog Devices supporting 3 V to 40 V input, delivering up to 100 W output with current-mode PWM control in a 6-pin DDPAK package.

Analog Devices LT3980EDE#TRPBF is a 58 V input, 2 A step-down switching regulator with 2.4 MHz switching frequency and 75 µA quiescent current in a compact DFN package. Ideal for industrial and automotive buck conversion from wide input rails.

Analog Devices LT6654AIS6-2.048#TRMPBF is a precision 2.048 V low-noise voltage reference with 10 ppm/°C temperature coefficient in a compact 6-pin SOT-23 package. Specified from -40°C to +85°C for high-accuracy ADC and DAC reference applications.

Voltage References High Voltage, High Current Voltage Reference

The Analog Devices LT6657AHMS8-2.5 is a precision 2.5 V voltage reference delivering output accuracy within ±0.05% (2.4975 V to 2.5025 V) and up to 10 mA output current. Housed in an 8-pin MSOP package, it targets automotive and medical applications requiring stable, low-noise reference voltages.

LT6657BHMS8-2.5 is a precision 2.5 V buffered voltage reference IC from Analog Devices featuring 3 ppm/°C maximum temperature drift and ultra-low noise. Delivers 2.5 V ±0.1% initial accuracy with 50 mA output current capability for ADC and DAC reference applications. Available in 8-pin MSOP package for compact high-precision analog circuit designs.

The LTC6259IMS8#TRPBF is a dual rail-to-rail input/output op-amp from Analog Devices, offering 1.3 MHz bandwidth and only 23 µA supply current per amplifier in an MSOP-8 package, ideal for low-power portable and battery-operated analog designs.

The LT6657AHMS8-3#TRPBF is a precision buffered 3.0 V voltage reference from Analog Devices with an ultra-low 1.5 ppm/°C temperature drift and ±0.1% initial accuracy in an 8-pin MSOP package. It is optimized for high-resolution ADC and DAC reference applications in industrial instrumentation and data acquisition systems.

LT6657AHMS8-3 is a precision 3.0 V buffered voltage reference from Analog Devices with an ultralow 1.5 ppm/°C maximum temperature coefficient and low noise output. Provides 3.0 V ±0.1% initial accuracy with 50 mA output current capability for high-resolution ADC and DAC applications. Housed in an 8-pin MSOP package for compact precision analog and measurement system designs.

Voltage References 3ppm/ C Drift, Low Noise, Buffered Reference

Voltage References 3ppm/ C Drift, Low Noise, Buffered Reference