LTC4121EUD-4.2#PBF Analog Devices Integrated Circuit (Quad Flat No-Lead) In Stock
Analog Devices LTC4121EUD-4.2#PBF is a 40V, 400mA synchronous step-down Li-ion battery charger in 16-lead QFN, offering programmable charge current, wide input range, and autonomous charging control for embedded systems.
- Manufacturer
- Analog Devices
- Package
- Quad Flat No-Lead
- Pin Count
- 16
- Lifecycle
- ACTIVE
- Datasheet
- LTC4121EUD-4.2#PBF Datasheet PDF
- Category
- Integrated Circuit
- Price
- From $3.6100(MOQ 1)
- Temp Range
- -40.0°C to 125.0°C
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
Key Features
- 40 V input rating handles automotive and industrial supply rails with wide voltage swings
- 400 mA synchronous step-down topology delivers high efficiency charging with low heat dissipation
- Fixed 4.2 V charge termination voltage factory-programmed for single-cell Li-ion batteries
- Autonomous charger operation requires no host MCU, simplifying firmware and reducing BOM
Applications
The LTC4121EUD-4.2#PBF is designed for embedded systems that harvest energy from solar panels, automotive 12 V rails, or wide-range DC sources to charge a single-cell 4.2 V Li-ion battery. Its 40 V input tolerance makes it suitable for industrial remote sensors and portable field instruments powered from unregulated supplies. The autonomous operation mode enables battery backup solutions and IoT edge nodes that must charge reliably without microcontroller supervision.
Specifications
| Pbfree Code | No |
| Manufacturer Package Code | 05-08-1691 |
| YTEOL | 8.5 |
| Adjustable Threshold | YES |
| Analog IC - Other Type | LINEAR BATTERY CHARGER |
| JESD-30 Code | S-PQCC-N16 |
| JESD-609 Code | e3 |
| Number of Channels | 1 |
| Number of Functions | 1 |
| Package Body Material | PLASTIC/EPOXY |
| Package Equivalence Code | LCC16,.12SQ,20 |
| Package Shape | SQUARE |
| Package Style | CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage-Max (Vsup) | 40V |
| Supply Voltage-Min (Vsup) | 4.4V |
| Supply Voltage-Nom (Vsup) | 15V |
| Surface Mount | YES |
| Technology | CMOS |
| Temperature Grade | AUTOMOTIVE |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Terminal Form | NO LEAD |
| Terminal Pitch | 0.5mm |
| Terminal Position | QUAD |
| Threshold Voltage-Nom | +2.21V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Package | Quad Flat No-Lead |
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
| Moisture Sensitivity Level | MSL 1 |
| ECCN | EAR99 |
| HTS Code | 8542.39.00.01 |
| Country of Origin | Thailand |
Alternate & Equivalent Parts
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
What input voltage range does the LTC4121EUD-4.2#PBF support for solar or automotive charging?
The LTC4121EUD-4.2#PBF accepts input voltages from approximately 3.3 V up to 40 V, making it directly compatible with 12 V automotive rails, 24 V industrial bus voltages, and small solar panels, all while charging a single-cell 4.2 V Li-ion battery at up to 400 mA.
How is the charge current configured on the LTC4121EUD-4.2#PBF?
Charge current on the LTC4121EUD-4.2#PBF is set by a single external resistor connected to the PROG pin; selecting a 10 kΩ resistor programs roughly 100 mA, and scaling down to 2.5 kΩ achieves the full 400 mA, enabling flexible charge rates for batteries from 100 mAh to over 1 Ah capacity.
Does the LTC4121EUD-4.2#PBF require a microcontroller to manage the charge cycle?
No, the LTC4121EUD-4.2#PBF operates autonomously through its complete constant-current and constant-voltage charge algorithm, automatically transitioning through pre-charge, bulk charge, and termination phases without any firmware intervention, which simplifies designs for standalone IoT nodes or backup battery systems with 16-pin QFN footprint.
When would the LTC4121EUD-4.2#PBF be preferred over a lower-voltage charger IC for an industrial sensor?
Whenever the power source exceeds 6 V — such as a 12 V industrial rail or a 10 V to 18 V solar array — the 40 V input rating of the LTC4121EUD-4.2#PBF removes the need for a separate pre-regulator stage, saving at least one conversion stage and reducing system losses by several percentage points compared to cascaded 5 V or 6 V input charger solutions.
Related Guides
How to Choose a BAS70 Schottky Diode for Signal Clamping: Selection Guide
A practical BAS70KFILM and BAS70-family Schottky diode selection guide for signal clamping, RF detection, leakage, and topology choices.
Jul 4, 2026
AMC1202DWVR Design Guide for Isolated Current Sensing
Practical AMC1202DWVR design guide covering shunt sizing, isolation layout, input filtering, ADC scaling, and sourcing choices.
Jul 4, 2026
1206 100 uF MLCC Design Guide for Compact Bulk Decoupling
Design guidance for applying CL31A107MQHNNNE and related 1206 MLCCs in compact bulk decoupling networks.
Jul 3, 2026
0402 10 nF MLCC Design Guide for High-Speed Decoupling
Practical design guidance for using CL05B103KB5NNNC and related 0402 MLCCs in high-speed decoupling networks.
Jul 3, 2026
Why Buy from FindMyChip
About Analog Devices
Analog Devices (ADI) is a global leader in high-performance analog, mixed-signal, and digital signal processing integrated circuits used in virtually all types of electronic equipment.
More from Analog Devices
| Qty. | Unit Price | Ext. Price |
|---|---|---|
| 1+ | $9.0800 | $9.08 |
| 3+ | $8.5300 | $25.59 |
| 10+ | $6.0110 | $60.11 |
| 19+ | $4.7800 | $90.82 |
| 500+ | $4.2800 | $2140.00 |
| 1000+ | $3.6100 | $3610.00 |
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“The anti-counterfeit verification gave us confidence we'd never had with other China suppliers.”