Analog Devices

Analog Devices ADUC848 is an 8-bit microcontroller integrating a 10-channel, 16-bit ADC with a fast 8-bit MCU core in a Quad Flat Package. It combines precision analog signal acquisition with embedded microcontroller functionality for sensor measurement and industrial control designs. Available from authorized distributors with worldwide shipping.

Analog Devices LT8390HFE is a synchronous 4-switch buck-boost controller supporting 4 V to 60 V input, current-mode control, and spread-spectrum operation. Available in 28-lead QFN package with worldwide stock and shipping.

Switching Voltage Regulators 6V/6A High Eff, Step-Down DC-to-DC Reg

Analog Devices MAX20078AUE+ is a synchronous buck controller for high-power LED drivers in a 16-pin TSSOP package, supporting 2-channel open-drain LED control. Designed for efficient PWM dimming and current regulation in automotive and industrial LED lighting systems. Available in stock with worldwide shipping.

The LTC4313IMS8-3#TRPBF is a 2-wire I2C/SMBus bus buffer with high-impedance fault protection from Analog Devices in an 8-pin MSOP package. It extends I2C bus segments by buffering SDA and SCL lines while providing high-noise-margin operation suited for long or heavily loaded buses. Available from authorized distributors in tape-and-reel packaging with worldwide shipping.

Analog Devices LTM4619EV#PBF is a dual 12 A switching controller module in PBGA-144 package with 4.5 V to 26.5 V input range. Operates at up to 860 kHz switching frequency with current-mode PWM control, adjustable output from 0.8 V to 5 V. Ideal for high-current DC/DC conversion in computing and communications power supply designs.

Voltage References Low Cost 4.096V Shunt Voltage Reference

Hot Swap Voltage Controllers Low volt Positive Hot Swap + Power mon

RF Switch SPDT 200MHz to 2.2GHz 8dB Automotive 8-Pin MSOP EP T/R

12-Bit, 65/40/25Msps Low Power 3V ADCs, QFN-32

Conv DC-DC 2.7V to 5.5V Synchronous Step Down Single-Out 1.2V 6A 24-Pin LFCSP EP T/R

Analog Devices LTC6253ITS8#TRMPBF is a dual low-power rail-to-rail input/output operational amplifier in an 8-pin TSOT-23 package, rated for automotive applications on ±2.625 V or 5.25 V single-supply operation. It delivers 105 dB typical common-mode rejection ratio and 77 dB minimum CMRR for precision signal conditioning. Available from authorized distributors worldwide with in-stock inventory and competitive pricing.

The MAX20078ATEY+ is a synchronous buck high-brightness LED controller in a 16-pin LFCSP (3x3mm) package, supporting 2-channel LED driving with open-drain outputs and wide input voltage range for automotive and industrial lighting. It is in stock with worldwide shipping available.

Analog Devices MAX236EWG+ is a 5 V-powered multichannel RS-232 driver/receiver IC with 4 drivers and 3 receivers in a 24-pin wide SOIC package. It includes an internal charge pump, Schmitt trigger inputs, tristatable receivers, and supports EIA-232-E/TIA-232-E standards for robust serial communication interfaces. Available in stock worldwide.

Analog Devices MAX11284ETL+T is a dual-channel 24-bit delta-sigma ADC with integrated PGAs, 4 kSPS output data rate, and 0.0006% maximum linearity error. Available in 40-pin LFCSP package with worldwide shipping.

RF Amplifier DC - 8 GHz 15 dB Gain Ext Temp

7 X 7 MM, 0.80 MM HEIGHT, ROHS COMPLIANT, TQFN-48

Analog Devices LT1160CN#PBF is a half-bridge N-channel power MOSFET gate driver with Schmitt trigger inputs and totem-pole outputs in a 14-pin DIP package. It provides high-side and low-side gate drive for bridge converter and motor control topologies. Available from stock with worldwide shipping.

Analog Devices MAX11284ETL+ is a dual-channel 24-bit delta-sigma ADC with integrated PGAs offering 4ksps throughput rate, up to 3.6V analog input, and 0.0006% maximum linearity error in a 40-pin LFCSP package. Available from stock with worldwide shipping.

Analog Devices LTC6993HS6-2#TRPBF is a TimerBlox monostable multivibrator with a single true-polarity output, operating from -40°C to 125°C in a 6-pin TSOT-23 package for automotive and industrial pulse-generation applications.

The LT1513-2CR#TRPBF is a 2A current-mode switching battery charger IC from Analog Devices supporting Lead-Acid, Li-Ion, Li-Polymer, NiCd, and NiMH batteries in an 8-pin DDPAK package. It accepts input voltages from 2.7V to 25V and includes integrated current-mode control. Available from stock with worldwide shipping.

Hot Swap Voltage Controllers Hot Swap Contr. +48V Latch-Off Mode

3.12Gbps GMSL Serializers for Coax or STP Output Drive and Parallel Input

The LT4256-1IS8#PBF is a +48V hot swap controller IC by Analog Devices with latch-off fault mode and adjustable current limit threshold, housed in an SOIC-8 package. Key specs: 48V hot swap control, 2-channel, adjustable overcurrent threshold with latch-off protection. Available in stock with worldwide shipping.

Analog Devices LT1764EFE-3.3#PBF is a fixed 3.3 V, fast-transient-response low-noise LDO linear regulator with a 3 A output current and 340 mV nominal dropout voltage. It accepts inputs from 2.7 V to 20 V in a 16-pin TSSOP exposed-pad package. Available from stock with worldwide shipping.

Hot Swap Voltage Controllers Hot Swap Contr. +48V Auto-Retry

Analog Devices LT6654BXMS8-2.5#TRPBF is a precision 2.5 V low-dropout voltage reference in an MSOP-8 package rated for -40°C to +175°C operation. It delivers high output current with low noise and excellent long-term stability for demanding instrumentation and industrial applications. Available worldwide with in-stock shipping.

Analog Devices LTC3636EUFD#PBF is a dual-channel 6 A 20 V monolithic synchronous step-down regulator operating from 3.1 V to 20 V input with phase-shift control for reduced EMI. It delivers dual outputs adjustable from 0.6 V to 5 V in a compact QFN package.

LINEAR TECHNOLOGY - LTC4260IUH#PBF - HOT SWAP CNTRL, 80V, 32QFN

DS1077Z-203+ is a Analog Devices crystal oscillator for clock-generation circuits. It provides 8 pins, -40°C to 85°C, Small Outline Packages. From RFQ pricing, in-stock sourcing supports worldwide shipping.

Analog Devices LTC2387IUH-18#TRPBF is an 18-bit SAR ADC with 1 differential input channel, 0.0011% max linearity error, and a 32-QFN (5mm×5mm) package. Supports up to 15.6Msps sampling rate with ±4.1V input range for precision high-speed data acquisition. Available in stock with worldwide shipping.

3.5- and 4.5-Digit, Single-Chip ADCs with LED Drivers and µC Interface, PDIP-28

Analog Devices LTC3869IUFD#PBF is a dual 2-phase synchronous buck controller with current-mode PWM control, supporting input voltages from 4 V to 38 V and adjustable output from 0.6 V to 12.5 V, packaged in a QFN for high-density power designs. It can also operate as an LDO regulator for design flexibility. Available from authorized distributors with worldwide shipping.

The LT6654BXMS8-2.5#PBF is a precision 2.5V voltage reference IC by Analog Devices rated for operation from -40°C to 175°C junction temperature in an MSOP-8 package. Key specs: 2.5V output, wide supply range, high-temperature operation to 175°C. Available in stock with worldwide shipping.

LTC1598IG#PBF is an Analog Devices 8-channel 12-bit successive-approximation ADC with serial SPI interface, supporting ±2.5 V analog input range and 2.8 µs maximum conversion time in a 36-pin SOIC package. Available in stock with worldwide shipping.

Analog Devices LTC3869IGN-2#PBF is a dual 2-phase synchronous step-down switching controller supporting 4 V to 38 V input range and adjustable output from 0.6 V to 12.5 V. It uses current-mode PWM control for tight transient regulation in high-current power supplies. Available in a 28-pin GN package with worldwide shipping.

Analog Devices MAX471ESA+T is a high-side current-sense amplifier measuring 0 A to 3 A with ±3% accuracy over a 3 V to 36 V supply range in an SOIC-8 package. Integrated precision resistor and op-amp eliminate external shunt components for simplified battery and load current monitoring. Available from stock worldwide with competitive pricing.

Analog Devices LTC1598CG#PBF is a 12-bit, 8-channel successive approximation ADC with an analog input range of -0.05 V to 5.55 V, packaged in a 24-pin SSOP (G24). It offers a maximum linearity error of 0.0732% (±0.5 LSB DNL) and serial SPI interface for easy microcontroller integration. Available from stock worldwide for data acquisition and sensor measurement designs.

Analog Devices MAX825ZEXK+T is a single-channel microprocessor supervisory circuit in a 5-pin SC-70 package that provides voltage monitoring with manual reset and a watchdog timer function for embedded system reliability. It monitors supply rails with a fixed threshold and asserts reset to ensure correct processor startup and fault recovery. Available from authorized distributors with worldwide shipping.

Analog Devices LTC4313IMS8-3#PBF is a 2-wire I2C/SMBus bus buffer with high noise margin in an MSOP-8 package, supporting up to 400 kHz fast-mode operation. It isolates capacitive loads and enables hot-swap card insertion without corrupting live bus signals. Available from authorized distributors with worldwide shipping.

LTC1598LCG#PBF is a 12-bit successive approximation ADC from Analog Devices with 8 analog input channels, 3V single-supply operation, and low power consumption, housed in a 24-pin SOIC package.

Supervisory Circuits 5-Pin Microprocessor Supervisory Circuits with Watchdog Timer and Manual Reset

The MAX14745KEWX+T is a 5-channel integrated power management unit from Analog Devices designed for wearable charge management with adjustable thresholds and battery management features. It integrates all power rails in a compact 36-ball WLCSP package measuring 6×6 mm. Available from stock worldwide with fast shipping.

IC OPAMP GP 2 CIRCUIT 8SOIC

The LT1073CS8-12#PBF is a micropower DC/DC converter from Analog Devices with 1 V to 30 V input range, 12 V fixed output at up to 0.4 A, supporting step-up, step-down, inverting, and non-inverting topologies in an 8-pin SOIC package. It uses pulse frequency modulation for high efficiency at light loads, ideal for battery-powered portable systems. Available from authorized distributors with worldwide shipping.

LT1073CS8-5#TRPBF is a micropower buck-boost switching regulator by Analog Devices with a fixed 5 V output and 1.5 A switch current rating. Key specs: 1 V to 30 V input range, pulse-frequency modulation control, 8-SOIC package. Available in tape-and-reel with worldwide shipping.

ELECTROMECHANICAL SWITCH NON REFLECTIVE SWITCH SPDT 4GHZ

LDO Voltage Regulators 1A Single Resistor Programmed Low Dropout Linear Regulator

WLP-25

MAXIM INTEGRATED PRODUCTS - MAX30208CLB+ - TEMP SENSOR, DIGITAL, TLGA-10