Analog Devices

ANALOG DEVICES - ADP2302ARDZ-3.3-R7 - Buck (Step Down) Switching Regulator, Fixed, 3V-20V In, 3.3V And 2A Out, 700 kHz, NSOIC-8

MAX9375EUA+ is a Analog Devices integrated circuit component for integrated circuit designs. It supports 1 channel in a Small Outline Packages package. Request inquiry pricing with worldwide shipping support for production or replacement sourcing.

Switching Voltage Regulators 1.2MHz Inverting DC/DC Converter in 5-lead SOT-23

MAX16822AASA+T is a Analog Devices integrated circuit component for integrated circuit designs. It supports 2MHz in a Small Outline Packages package. Request inquiry pricing with worldwide shipping support for production or replacement sourcing.

MAXM17537ALY# is a Analog Devices power-management component for regulated power conversion designs. It supports 4.5V in a supplier-specified package. Request inquiry pricing with worldwide shipping support for production or replacement sourcing.

ANALOG DEVICES - HMC326MS8GE - RF Amplifier IC, 21 dB Gain / 5 dB Noise, 3 GHz to 4.5 GHz, 5 V, HMSOP-8

MAX3074EESA+ is a Analog Devices interface transceiver IC for industrial serial communication interfaces. It supports 3.3V in a Small Outline Packages package. Request inquiry pricing with worldwide shipping support for production or replacement sourcing.

5V, 4A Synchronous Step-Down?Silent Switcher in 2mm x 2mm LQFN

3.0 V to 5.5 V, ±12 kV IEC ESD Protected, 500 kbps/50 Mbps RS-485 Transceivers

Supervisory Circuits Single UV/OV Monitor

MAX1745EUB/V+ is a Analog Devices power-management component for regulated power conversion designs. It supports 1 channel in a Small Outline Packages package. Request inquiry pricing with worldwide shipping support for production or replacement sourcing.

Linear Voltage Regulators 150mA LDO Adj Vout w/ QOD

MAX4802CQI+ is a Analog Devices switch IC for signal routing and RF switching circuits. It supports 1 channel in a Plastic Leaded Chip Carrier package. Request inquiry pricing with worldwide shipping support for production or replacement sourcing.

High Performance, +3.3V Clock Generator, 25 - 550 MHz

MAX96701GTG/V+ is a Analog Devices integrated circuit component for integrated circuit designs. It supports 24 pins in a Quad Flat No-Lead package. Request inquiry pricing with worldwide shipping support for production or replacement sourcing.

MAX1745EUB/V+T is a Analog Devices power-management component for regulated power conversion designs. It supports 1 channel in a Small Outline Packages package. Request inquiry pricing with worldwide shipping support for production or replacement sourcing.

Clock Generators & Support Products Hi Perf Clk Gen 1000MHz Fmax IC 550MHz 1 40-VFQFN Exposed Pad

RF Mixer BiCMOS Mix w/Int LO amp, 700 - 1500 MHz

Highly Integrated4x Buck Regulators SD0/1 Peak Efficiency >90% at 3.6VIN,1.1VOUT SD2/3 Peak Efficiency >93% at 3.6VIN,1.8VOUTSupports LDDR4x Memory requirements 9x Low-Dropout Linear RegulatorEight GPIOs Real-Time ClockBackup Battery Charger Bidirectional Reset I/OInterrupt OutputSystem Watchdog TimerFlexible and ConfigurableI2C-Compatible Interface Factory OTP Options Available Flexible Power SequencerConfigurable Power-Up/Power-Down/Sleep Mode Entry/Exit TimingHighly configurable GPIO ALT ModesThree Resou

MAX40078AUD+T is a precision quad voltage-feedback operational amplifier from Analog Devices with 120 dB typical CMRR and ultra-low bias current of 26 nA maximum at 25°C. Housed in a 14-pin TSSOP package, it is ideal for sensor signal conditioning and high-accuracy measurement applications. Available in stock with worldwide shipping.

Battery Management Wearable Charge Management Solution

High Voltage Buck-Boost Battery Charge?Controller with Maximum Power Point?Tracking (MPPT) and I2C

42V, 15A Synchronous?Step-Down Silent Switcher 2

GaAs MMIC I/Q DOWNCONVERTER 20 - 28 GHz

IC INST AMP 1 CIRCUIT 8DIP

LQFN-36

Switching Voltage Regulators Mono 2x Track 3A Buck Sw Reg

Analog to Digital Converters - ADC 20-Bit, 0.5 MSPS, Diff, PulSAR ADC

Surge Stopper with Ideal Diode

● Robust Galvanic Isolation of Digital Signals • Withstands 5kVRMS for 60s (VISO) Wide-Body • Withstands 3kVRMS for 60s (VISO) Narrow-Body • Continuously Withstands 848VRMS (VIOWM) WideBody • Continuously Withstands 445VRMS (VIOWM) Narrow-Body • Withstands ±10kV Surge Between GNDA and GNDB with 1.2/50µs Waveform • High CMTI (50kV/µs, typ) ● Options to Support a Broad Range of Applications • 2 Data Rates (25Mbps/150Mbps) • 2 Channel Direction Configurations • 2 Output Default States (High or Low)

The MAX22028AWA+ is a compact, isolated half-duplex RS-485/RS-422 transceiver from Analog Devices with AutoDirection Control, supporting data rates up to 500 kbps, a 5 V supply, and ±15 kV ESD protection in an 8-SOIC package.

Operational Amplifier, 10000uV Offset-Max, PQCC16

RS-422/RS-485 Interface IC +5.0V, +/-15kV ESD-Protected, Fail-Safe, Hot-Swap, RS-485/RS-422 Transceivers

Analog to Digital Converters - ADC 12-Bit A/D Converter with 3-State Binary Outputs

RF Detector RMS TruPwr Detectors

Switching Voltage Regulators 26A Single or 13A Dual DC/DC uModule Regulator (Higher Vout version of LTM4620)

Analog Devices MAX32650GWQ+ is an ultra-low-power 32-bit ARM Cortex-M4 with FPU microcontroller featuring 3 MB Flash and 1 MB SRAM in a 96-ball WLCSP package. It integrates hardware security, DMA, ADC, and boundary scan for IoT and wearable applications. Available in compact wafer-level packaging for space-constrained designs with worldwide distribution.

Analog Devices AD977ABRSZRL is an integrated circuit for electronic assemblies. It is specified around 28 pins for matching footprints and electrical requirements. From inquiry pricing with worldwide shipping support.

The MAX19588ETN+D is a 16-bit, 100 Msps analog-to-digital converter by Analog Devices featuring -82 dBFS noise floor, 2.56 V analog input, single-channel input, and 56-pin QFN package for high-dynamic-range communications, medical imaging, and software-defined radio applications.

RF Amplifier Analog VGA

Analog Devices MAX4601CPE+ is a quad SPST CMOS analog switch IC in 16-pin DIP package with 2.5 Ω on-resistance, operating on dual supplies from ±4.5 V to ±20 V or single supply from 4.5 V to 36 V, suitable for audio and signal switching applications.

Analog Devices MAX407CSA is a dual general-purpose operational amplifier with 2 circuits in an 8-SOIC package, offering low supply current and rail-to-rail output swing for portable and battery-powered signal conditioning applications.

The MAX5862DUXH+ is a fully integrated downstream cable QAM modulator from Analog Devices, consuming only 131 mW per QAM channel, supporting up to 256-QAM, and housed in a compact 12 mm × 17 mm BGA package for high-density CMTS and edge-QAM headend designs.

The MAX782CBX+ is a triple-output power-supply controller IC from Analog Devices, designed for notebook computers. It provides regulated outputs for CPU core, I/O, and memory rails, featuring high efficiency synchronous buck conversion with 5V and 3.3V outputs, programmable voltage via external resistors, and integrated MOSFET gate drivers. Ideal for portable computing power management applications.

MAX17303X+T is a 1-cell ModelGauge m5 EZ fuel gauge IC with integrated battery protector from Analog Devices. It provides accurate state-of-charge estimation using SHA-256 authentication and internal self-discharge detection. Packaged in a 15-ball WLCSP, it targets portable consumer electronics, wearables, and IoT devices requiring compact, secure battery management.

Analog Devices LTC3404EMS8#PBF, 1-Channel, Step Down DC-DC Converter 8-Pin, MSOP

The Analog Devices MAX20040DATPA/VY+ is an automotive-grade buck-boost converter operating from 2 V to 36 V input, delivering up to 1.2 A output current at 2.2 MHz switching frequency with an integrated H-bridge architecture. It supports both PWM and PFM control modes for high efficiency across load ranges. Housed in a 20-pin 4x4 mm LFCSP package, it is designed for 12 V automotive and industrial power rails.

LOW DRIFT, LOW NOISE INSTRUMENTA

Integrated Downstream Cable QAM ModulatorHigh-Density: 8, 16, 24, or 32 QAM Channels14-Bit 4.6Gsps RF-DACDOCSIS 3.0 DRFI CompliantHighly Flexible and ConfigurableRRC Filters Support ITU-T J.83 Annex A, B, and C1MHz to 8MHz Channel BandwidthFull Carrier Agility within Each of Four 192MHz BlocksBlock Agility within 950MHz Output BandwidthReconfigurable Without Service InterruptionInput Symbol Rate: 1Msym/s to 7.14Msym/sIndependently Set for Each ChannelIntegrated QAM Mapper (16/32/64/128/256-QAM)Supports All

IC DAC 12BIT A-OUT 18SOIC