Analog Devices

Switching Controllers PWM with 0% to 100% Pulse Width Control, MP

EEPROM Memory IC 1Kbit 1-Wire® 2 µs TO-92-3

The MAX77654BENV+T is an ultra-low power PMIC from Analog Devices featuring a 3-output SIMO buck-boost regulator and a linear battery charger. It integrates 8 channels of power management in a compact 30-ball WLCSP package, ideal for space-constrained wearable and IoT applications.

Analog Devices MAX9100EUK+T is a micropower voltage comparator in a compact SOT-23 5-pin package, featuring ultra-low supply current under 5 µA, 1.0 V minimum supply operation, and an open-drain output for flexible logic interfacing. Available with worldwide shipping.

IC LED DRVR RGLTR DIM 50MA 24QFN

Switching Voltage Regulators Dual 2.7VINMIN, 8A Step-down uModule Regulator

CAN Interface IC 5KV Isolated CAN

5V, 3A Synchronous Step-Down Silent Switcher in 2mm x 2mm LQFN

Analog Devices MAX17270AENE+T is a triple-output nanopower buck-boost regulator with 2.7 V to 5.5 V input range, up to 1.155 A output current, in a compact 16-WLCSP package. Ideal for battery-powered IoT and wearable designs.

20V, 200mA, Ultralow Noise, Ultrahigh PSRR Precision DAC/Reference Buffer

Analog Devices MAX16832AASA/V+ is a 2 MHz high-brightness LED driver with integrated MOSFET and high-side current sense, packaged in an 8-pin SOIC, ideal for efficient LED lighting systems requiring compact constant-current control.

Analog Devices LTC6229IDD#TRPBF is a precision, low-drift, low-noise high-speed operational amplifier with 730 MHz bandwidth and 110 dB CMRR. Offers voltage-feedback architecture in a compact small outline no-lead package. Available from authorized distributors with worldwide shipping.

Low Cost CMOS, High Speed, Rail-to-Rail Amplifier (Quad)

±60V Fault Protected 3V to 5.5V RS485/RS422 Transceiver with Level 4 IEC ESD, 20Mbps, –40°C to 85°C

RS-422/RS-485 Interface IC 20Mbps 60V Fault Protected RS485 Transceiver (Full Duplex + Enables)

Switching Voltage Regulators 2.2MHz Boost Conv. in 5-lead SOT-23

Attenuators Fixed atten 4 dB

IC LED DRIVER RGLTR 500MA 10DFN

Monostable Multi-vibrator ONE SHOT with Rising Edge Trigger, Non-Retriggerable

The MAX22025AWA+ is a compact, isolated, half-duplex RS-485/RS-422 transceiver with auto-direction control in an 8-SOIC package. It operates with a 4.75 V to 5.25 V supply (VDDB), supports EIA-485 and EIA-422 standards, and simplifies bus direction switching without manual driver-enable control.

MAXIM INTEGRATED PRODUCTS - MAX4521EUE+ - Analogue Switch, 4 Channels, SPST - NC, 100 ohm, 2V to 12V, ± 2V to ± 6V, TSSOP, 16 Pins

Analog Devices LTC4282CUH#TRPBF is a high-current hot swap controller with I2C-compatible monitoring, enabling safe board insertion and removal in live 4-channel high-availability systems. It integrates adjustable overvoltage and overcurrent thresholds in a compact 32-lead QFN package.

Op Amp Single Wideband Amplifier ±18V 12-Pin TO-8

Supervisory Circuits CPU Supervisor with Nonvolatile Memory and Programmable I/O

Analog Devices MAX16832AASA/V+T is a 2 MHz high-brightness LED driver IC with integrated MOSFET and high-side current sense in an 8-SOIC package. Supports constant-current output up to 2 A with wide input voltage range. Available in stock with worldwide shipping.

SPI Digital Isolator 2500Vrms 6 Channel 4MHz, 8MHz 30kV/µs CMTI 32-BBGA Module

Analog Devices MAX9002ESA+ is a low-power, high-speed, single-supply op-amp/comparator reference IC in 8-pin SOIC package. It delivers high-speed analog signal processing with low quiescent current, making it suitable for battery-powered and portable applications. Available from authorized distributors with worldwide shipping.

Analog Devices MAX9004EUB+T is a low-power, high-speed single-supply op-amp comparator reference IC in a 10-pin MINI-SO package. Operates from a single supply with propagation delays under 10 ns and rail-to-rail inputs. Available in tape-and-reel packaging with worldwide shipping.

20V, 200mA, Ultralow Noise, Ultrahigh PSRR Precision DAC/Reference Buffer

20V, 200mA, Ultralow Noise, Ultrahigh PSRR Precision DAC/Reference Buffer

Interface - Specialised Multiprotocol, Pin-Selectable Data Interface Chipset

Analog Devices LTC1771EMS8#PBF, DC-DC Controller 8-Pin, MSOP

Surge Suppressors Low Quiescent Current Surge Stopper with Adjustable Clamp and Retry

LINEAR TECHNOLOGY - LT1931ES5#TRMPBF - DC-DC Switching Inverting Regulator, Adjustable, 2.6V-16V in, 1A out, 1.2MHz, TSOT-23-5

Integrated Downstream Cable QAM ModulatorHigh-Density: 8, 16, 24, or 32 QAM Channels14-Bit 4.6Gsps RF-DACDOCSIS 3.0 DRFI CompliantHighly Flexible and ConfigurableRRC Filters Support ITU-T J.83 Annex A, B, and C1MHz to 8MHz Channel BandwidthFull Carrier Agility within Each of Four 192MHz BlocksBlock Agility within 950MHz Output BandwidthReconfigurable Without Service InterruptionInput Symbol Rate: 1Msym/s to 7.14Msym/sIndependently Set for Each ChannelIntegrated QAM Mapper (16/32/64/128/256-QAM)Supports All

MAX9626ATC+ is a Analog Devices audio amplifier IC for speaker driver and compact audio output stages. It supports 1.35GHz in a Quad Flat No-Lead package. Request inquiry pricing with worldwide shipping support for production or replacement sourcing.

Precision Amplifiers Over-the-Top uP R-to-R I/O OA

LDO Voltage Regulators 100mA, Low Noise, LDO Micropower Regulators in SOT-23

MAX16543GPC+ is a Analog Devices integrated circuit component for integrated circuit designs. It supports 1 channel in a supplier-specified package. Request inquiry pricing with worldwide shipping support for production or replacement sourcing.

Integrated Downstream Cable QAM ModulatorHigh-Density: 8, 16, 24, or 32 QAM Channels14-Bit 4.6Gsps RF-DACDOCSIS 3.0 DRFI CompliantHighly Flexible and ConfigurableRRC Filters Support ITU-T J.83 Annex A, B, and C1MHz to 8MHz Channel BandwidthFull Carrier Agility within Each of Four 192MHz BlocksBlock Agility within 950MHz Output BandwidthReconfigurable Without Service InterruptionInput Symbol Rate: 1Msym/s to 7.14Msym/sIndependently Set for Each ChannelIntegrated QAM Mapper (16/32/64/128/256-QAM)Supports All

10A Positive Adjustable Voltage Regulator.

LTC6363IRD#PBF is a Analog Devices audio amplifier IC for speaker driver and compact audio output stages. It supports 1 channel in a Quad Flat No-Lead package. Request inquiry pricing with worldwide shipping support for production or replacement sourcing.

Analog Devices MAX8882XEUTA5+T is a dual low-noise, low-dropout linear regulator IC in a 6-pin SOT23 package, delivering 160mA per channel with fixed positive output. Ideal for noise-sensitive portable and wireless applications. Available in stock with worldwide shipping.

RF Detector

MAXM17712AMB+ is a Analog Devices power-management component for regulated power conversion designs. It supports 4V in a supplier-specified package. Request inquiry pricing with worldwide shipping support for production or replacement sourcing.

Multiplexer Switch ICs Improved, 8-Channel/Dual 4-Channel, CMOS Analog Multiplexers

Power Management Specialized - PMIC MAXM17712: 4.5V to 60V Input, 150mA, 3.3V Synchronous DC-DC and 1.8V, 50mA low noise LDO Himalaya uSLIC Power Module / MAXM17729: 4.5V to 42V Input, 150mA, 3.3V Synchronous DC-DC and 1.8V, 50mA low noise LDO Himalaya uSLIC Power Module / MAXM17963: 4

80V Synchronous 4-Switch Buck-Boost DC/DC Slave Controller for LT8708 Multiphase System

High Speed Operational Amplifiers Low Frequency to 1.4GHz, 50-Ohm Gain Block

MAX964ESE+T is a Analog Devices integrated circuit component for integrated circuit designs. It supports 3V in a Small Outline Packages package. Request inquiry pricing with worldwide shipping support for production or replacement sourcing.