Analog Devices

Battery Management IC, ULP PMU CHG FG BP Buck BB WLCSP

LT1528CQ#PBF is a low-dropout linear voltage regulator from Analog Devices providing up to 3 A output current with a fixed or adjustable positive output voltage, featuring a typical dropout voltage of only 0.57 V and a maximum input voltage of 15 V in a 5-pin DDPAK package.

The LTC7060 is an Analog Devices 100 V half-bridge gate driver with floating high-side and low-side drives, programmable dead-time control, and robust protection features for motor drives and power conversion. It operates across industrial temperature ranges and is available from authorized distributors with worldwide shipping.

ADI IC, ULP PMU CHG FG BP Buck BB WLCSP

Accelerometer Triple ±10g/±20g 2.5V 73.6mV/g to 86.4mV/g/36.8mV/g to 43.2mV/g 14-Pin CLLCC Tray

MAX6628MKA+T is a remote digital temperature sensor from Analog Devices with ±1°C accuracy, serial I2C/SMBus interface, and 5.5°C maximum accuracy over the full range in an 8-pin SOT-23 package. Suited for board-mount thermal monitoring in servers, laptops, and industrial equipment.

Accelerometers Tri-Axis Analog Accel +/-10g/+/-40g

Accelerometer Triple ±2g/±8g 3.3V 368mv/g to 432mv/g/92mv/g to 108mv/g 14-Pin CLLCC T/R

The MAX4514ESA+T is an Analog Devices low-voltage, low-on-resistance single-pole single-throw (SPST) CMOS analog switch in an 8-pin SOIC package, providing reliable signal routing for data acquisition and communications circuits. Available in tape-and-reel packaging with worldwide distribution.

Analog Devices MAX1196ECM+D is a dual 8-bit, 40 Msps analog-to-digital converter operating from a 3 V supply with an internal reference and multiplexed parallel outputs. Optimized for low-power dual-channel digitization in portable communications, imaging, and video processing applications.

Battery Management 200kHz, 1.5A Stepdn Bat Charger

Low-Cost Precision Sensor Signal Conditioner

Current & Power Monitors & Regulators >> MAX17612A: 4.5V to 60V, 200mA Overvoltage, Overcurrent Protector with Reverse Protection and UVLO/OVLO >> MAX17612B: 4.5V to 60V, 200mA Overvoltage, Overcurrent Protector with UVLO/OVLO >> MAX17612C: 4.5V to 60V, 200mA Overvoltage, Overcurrent Pro

LTM4613MPY#PBF is an Analog Devices ultralow-EMI step-down DC/DC power module accepting 5 V to 36 V input and delivering up to 8 A continuous output current with adjustable output voltage from 3.3 V to 15 V, using current-mode PWM control in a compact BGA power module package.

♦ Available in SOT23-5 Package ♦ +2V to +12V Single-Supply Operation ♦ Guaranteed On-Resistance: 20Ω with +5V Supply 10Ω with +12V Supply ♦ Guaranteed Low Off-Leak

LTC2226CUH#PBF is a 12-bit, 25 MSPS analog-to-digital converter from Analog Devices featuring a single differential input channel, 1 V to 1.9 V analog input range, and low-power CMOS architecture packaged in a 32-pin QFN for high-speed data acquisition systems.

MAX15093GWL+T is a 15 A eFuse hot-swap controller with an integrated power FET and adjustable overcurrent threshold. It provides inrush current limiting, overvoltage protection, and fault management for board-level power rails in servers and telecom equipment. Packaged in a compact 40-ball WLCSP for space-constrained high-density power designs.

Switching Voltage Regulators Ultralow EMI, 36V, 1A Step-down uModule Regulator LGA Package 71-Lead (15mm × 9mm × 2.82mm) (Reference LTC DWG # 05-08-1823 Rev Ø)

Fractional-N PLL with Integrated VCO SMT, 990 - 1105 MHz

Analog & Digital Crosspoint ICs +3.3V, 2.7Gbps Dual 2 x 2 Crosspoint Switch

Fractional-N PLL with Integrated VCO SMT, 990 - 1105 MHz

The LTC2377IMS-20#PBF is a 20-bit SAR ADC with 500 ksps sample rate, 104 dB SNR, and 0.5 ppm INL in a 16-pin MSOP package from Analog Devices. It features a serial SPI interface, 10.5 mW power consumption, and a wide analog input range from -2.5 V to 5.1 V for high-precision measurement. Suited for industrial instrumentation, medical imaging, and precision data acquisition systems requiring excellent linearity.

MAX4802ACCM+ is an 8-channel SPST analog switch with 38 Ω on-resistance, operating from 2.7 V to 6 V supply in a 48-pin LQFP package. It provides 33 dB off-state isolation and is designed for signal routing, test equipment multiplexing, and communication system switching applications.

IC AMPLIFIER 24QFN

The LT1634ACS8-5#PBF is a precision two-terminal 5 V shunt voltage reference with 0.05% initial accuracy and very low temperature coefficient, housed in an 8-pin SOIC package. It is designed for use in high-accuracy data conversion and instrumentation circuits. Available in global distribution with worldwide shipping.

► Maximum temperature coefficient (TCVOUT): ► 0.8 ppm/°C (D grade 0°C to 70°C) ► 1 ppm/°C (C grade 0°C to 70°C) ► 2 ppm/°C (B grade −40°C to +125°C) ► 4 ppm/°C (A grade −40°C to +125°C) ► Output noise (0.1 Hz to 10 Hz): ► 1 μV p-p at VOUT of 2.048 V typical ► Initial output voltage error: ► B, C, D grade: ±0.02% (maximum) ► Input voltage range: 3 V to 15 V ► Operating temperature: ► A grade and B grade: −40°C to +125°C ► C grade and D grade: 0°C to +70°C ► Output current: +10 mA source/−10 mA s

LTC3633EUFD#TRPBF is a dual 3 A monolithic synchronous step-down regulator from Analog Devices with 3.6 V to 15 V input range, 4 MHz switching frequency, current-mode control, and LDO fallback operation. Ideal for point-of-load regulation in communications, industrial, and processor power supply designs.

The MAX20303JEWN+T is a highly integrated PMIC from Analog Devices featuring ultra-low IQ voltage regulators, a lithium-ion battery charger, and a fuel gauge in a single 56-ball WLCSP. Designed for small Li-ion wearable systems, it integrates 8 channels of power management to minimize BOM and PCB area.

The MAX9788ETI+ is a single-channel Class G ceramic speaker driver from Analog Devices delivering up to 14 V peak-to-peak output swing and 2.4 W nominal output power. Housed in a 28-pin 4×4 mm LFCSP package, it targets mobile phones, tablets, and portable consumer devices requiring high acoustic output with minimal power dissipation.

The LTC2912CDDB-3#TRPBF is a single-channel under/overvoltage supervisor IC from Analog Devices with an adjustable threshold, programmable reset delay, and active-low open-drain reset output. It operates in an ultra-compact 8-pad DFN package and is suitable for power-rail monitoring in portable and industrial systems.

LT6658AHDE-1.2#TRPBF is a precision dual-output, high-current, low-noise voltage reference from Analog Devices with a 1.2 V output. It provides two independent regulated outputs in a 16-pin DFN package and features extremely low output noise for sensitive analog circuits. Designed for high-accuracy ADC references, instrumentation, and medical equipment demanding stable low-noise voltage references.

MAX7312ATG+T is a Maxim/Analog Devices 16-bit I/O port expander using a 2-wire I2C interface with interrupt output and hot-insertion protection. It provides 2 ports of 8 I/O lines each, configurable as inputs or outputs. Packaged in a 24-pin LFCSP (4×4×0.75 mm) for compact expansion of microcontroller GPIO.

Analog Devices MAX16822AASA/V+T is a 2 MHz high-brightness LED driver with integrated MOSFET and high-side current sensing, housed in an 8-pin SOIC package, designed for efficient LED lighting control in automotive and industrial applications.

Multiple Functions for Small Size • Synchronous 750mA Boost Converter - Fixed from 3.8V to 8.5V in 100mV Steps • Synchronous Buck Converter Up to 3A - Factory-Configurable Output Voltage from 0.8V to 3.8V in 25mV Steps - Resistor-Adjustable • 3.0V to 5.5V Operating Supply Voltage • 2.2MHz Operation • 93% ±3% Undervoltage Threshold • 107% ±3% Overvoltage Threshold • Individual EN_ Inputs and RESET_ Outputs ● High Precision • ±2% Output-Voltage Accuracy (OUT1), and ±1.5% Output-Voltage Accuracy

8 GHz 16-Bit Fractional-N PLL

LTC6560HUD#WPBF is a single-channel transimpedance amplifier (TIA) from Analog Devices designed for high-speed photodiode signal conversion. It converts input current to voltage with low noise and wide bandwidth, housed in a 16-pin QFN package for precision optical receiver designs.

Analog Devices, AD8553ARMZ

Analog Devices LTC6908CS6-1#PBF is a CMOS output, resistor-programmable oscillator operating from 0.05 MHz to 10 MHz with a 9 ns maximum fall time, housed in a compact 6-pin SOT-23 package. Its frequency is set by an external resistor, eliminating the need for crystals or trimmers in low-cost clock generation designs. Ideal for microcontroller clocking, PWM generation, and frequency reference applications in space-constrained boards.

MAX9919NASA/V+T is a Analog Devices integrated circuit for embedded electronics, industrial modules, and repair BOMs. Key specs include 8 pins, -20 V, 8-SOIC_N-150_MIL, -40°C to 125°C operating range. From RFQ pricing with in-stock sourcing and worldwide shipping support.

Hot Swap Voltage Controllers Hot Swap Contr. w/ADC and I2C

Analog Devices MAX16550AGPN+T is a 30 A integrated protection IC for 12 V bus applications, operating from 10.8 V to 13.2 V, housed in an 18-pin LFCSP package with adjustable threshold for bus protection.

ANALOG DEVICES - HMC797LP5E - RF Amplifier IC, 13.5 dB Gain / 6 dB Noise, DC to 22 GHz, 9 V to 11 V supply, QFN-32

LTM4657IY#PBF is a Analog Devices integrated circuit for embedded electronics, industrial modules, and repair BOMs. Key specs include 49 pins, 8 A, BGA, -40°C to 125°C operating range. From RFQ pricing with in-stock sourcing and worldwide shipping support.

MAX6420UK31+T is a Analog Devices integrated circuit for embedded electronics, industrial modules, and repair BOMs. Key specs include 5 pins, 5-SOT_23-N/A, -40°C to 125°C operating range. From RFQ pricing with in-stock sourcing and worldwide shipping support.

ADM5180APZ-REEL is an octal RS-232/RS-423 line receiver for multi-channel serial interface designs. It provides 8 receiver channels in a 28-pin PLCC package. Suitable for industrial terminals, instrumentation ports, and communication equipment needing reliable worldwide sourcing support.

MAXM17633AMG+ is a Analog Devices integrated circuit for industrial electronics and embedded systems. It combines 24 pins, 24-CSP_BGA_EM-4X4X1.55, -40°C to 125°C for reliable board-level integration. Quote-based sourcing supports stock checks and worldwide shipping.

MAX4800CQI+ is a Analog Devices integrated circuit for embedded electronics, industrial modules, and repair BOMs. Key specs include 28 pins, 28-PLCC-N/A. From RFQ pricing with in-stock sourcing and worldwide shipping support.

MAX308EUE+T is a Analog Devices integrated circuit for embedded electronics, industrial modules, and repair BOMs. Key specs include 16 pins, 16-TSSOP_4.4-4.4_MM, -40°C to 85°C operating range. From RFQ pricing with in-stock sourcing and worldwide shipping support.

IC SWITCH QUAD SPST 16SOIC

Schaltspannungsregler LV 5V Boost Converter