Analog Devices
Analog Devices (ADI) is a global leader in high-performance analog, mixed-signal, and digital signal processing integrated circuits used in virtually all types of electronic equipment.
11,378
Total Products
25
Categories
All Analog Devices Components
Showing 5,851–5,900 of 11,378
Ultralow Power, 3-Lead, Microprocessor Reset Circuits
Ultralow Power, 3-Lead, Microprocessor Reset Circuits
ADF4002SRU-EP-RL7 is a high-performance RF PLL frequency synthesizer with a 400 MHz phase detector operating on a 16-pin TSSOP package, designed for enhanced product longevity and reliability in demanding environments. It features a programmable reference divider, N-counter, and charge pump for precise clock synthesis and frequency translation. Available in stock worldwide for wireless communication, radar, and instrumentation phase-locked loop applications.
Ultralow Power, 3-Lead, Microprocessor Reset Circuits
ADL5504ACBZ-P2 is a TruPwr RMS power detector by Analog Devices operating from 450 MHz to 6000 MHz with a 50-ohm input and 3 V supply in a compact surface-mount package. Key specs: true RMS detection, wide 5.5 GHz frequency range, positive output polarity. Available from stock worldwide.
Transceivers
Microprocessor Reset Circuits
Transceivers
5 V, ±15 kV ESD Protected Half-Duplex Transceivers
4-Channel Multiplexer
Quad SPDT Switches
The ADG412BRUZ-REEL is a quad SPST analog switch IC from Analog Devices in a 16-pin TSSOP package with 35 Ohm on-resistance. It operates on dual ±15 V or single 12 V supplies, supporting high-voltage signal switching. Available on tape and reel from stock with worldwide shipping.
High Performance 4/8 Channel Fault-Protected Analog Multiplexers
14-Bit 1.8 V Dual Analog-to-Digital Converter
TruPwr Detector
Quad SPST Switches
High Voltage Latch-Up Proof, 4-/8-Channel Multiplexers
High Voltage, Low Noise, Low Distortion, Unity Gain Stable, High Speed, Dual 8-Lead Op Amp
Balanced Mixer, LO Buffer, IF Amplifier, and RF Balun
Four LVPECL Outputs,SiGe Clock Fanout Buffer
ADG3301BKSZ-REEL is a single-bit bidirectional logic-level translator from Analog Devices enabling voltage translation between 1.2 V, 1.8 V, 2.5 V, 3.3 V, and 5 V logic domains. Supports data rates up to 100 Mbps with automatic direction sensing requiring no direction control pin. Packaged in a 6-pin SOT-23 package for minimal board footprint in mixed-voltage embedded systems.
16-Bit, 100 kSPS/200 kSPS BiCMOS A/D Converter
Input/Output Operational Amplifier
Digital Audio Processor
1 Circuit IC Switch 8:1 11.5Ohm 20-TSSOP
Dual SPDT Switch
ADC
Analog Devices ADCMP600BKSZ-RL is a very fast rail-to-rail single-supply comparator operating from 2.5 V to 5.5 V with push-pull TTL/CMOS output and 5 mV maximum input offset voltage in a 5-pin SC-70 package. Ideal for threshold detection and signal conditioning in portable and high-speed digital systems. Available from stock with worldwide shipping.
ADC
Analog Devices ADE7518ASTZF16-RL is a single-phase energy measurement IC with high-accuracy active and reactive energy calculation, multiple analog inputs, and serial communication in a 64-pin LQFP package. It is designed for residential and commercial electricity metering applications requiring IEC and ANSI compliance.
CMOS Output Clock Generator
ADA4938-1ACPZ-R2 is an ultralow distortion fully differential ADC driver amplifier from Analog Devices, featuring 75dB CMRR and 18µA max bias current in a 16-pad QFN package. It is optimized for driving high-resolution ADC inputs with voltage-feedback architecture and internal frequency compensation. Available from stock worldwide with competitive pricing.
Low Cost CMOS, High Speed, Rail-to-Rail Amplifiers (Dual)
ADC
Low Cost, High Speed, Rail-to-Rail, Output Op Amp (Quad)
Analog-to-Digital Converter
Low Cost CMOS, High Speed, Rail-to-Rail Amplifiers
Fiber Channel/Ethernet Clock Generator IC 7 Clock Outputs
Network Clock Generator, Two Outputs
24 MHz Rail-to-Rail Amplifiers with Shutdown Option
Analog-to-Digital Converter
ADA4051-1ARJZ-RL is a Analog Devices integrated circuit for embedded, industrial, and mixed-signal electronic designs. It provides manufacturer-backed specifications for compact PCB layouts and purchasing checks. From RFQ pricing, it supports in-stock sourcing and worldwide shipping.
Low Power, Low Noise, Low Bias Current, Precision Dual RRO Op Amp
Low Power, 3.6 MHz, Low Noise, Rail-to-Rail Output, Operational Amplifiers
The ADA4627-1BRZ-RL is a high-speed JFET op-amp with 30 V supply, 5 fA typical input bias current, and 116 dB common-mode rejection ratio. It combines low noise and wide bandwidth in a voltage-feedback architecture for precision signal conditioning. Available on tape-and-reel from stock with worldwide shipping.
Dual 10-bit/12-bit, 100 MSPS ADC ► SNR = 67 dB, fIN = 30.1 MHz ► Dual 10-bit/12-bit, 170 MSPS DAC ► ACLR = 74 dBc ► 5 channels of analog auxiliary input/output ► Low power, <425 mW at maximum sample rates ► Supports full and half-duplex data interfaces ► Small 72-lead LFCSP lead-free package
30 V, High Speed, Low Noise, Low Bias Current, JFET Operational Amplifier
6-Output Clock Generator
Low Power, 3.6 MHz, Low Noise, Rail-to-Rail Output, Operational Amplifiers
Micropower RRIO Operational Amplifier
Need Analog Devices Components?
Get competitive quotes from authorized China distributors
Request a Quote