Analog Devices

Four LVPECL Outputs,SiGe Clock Fanout Buffer

ADG3301BKSZ-REEL is a single-bit bidirectional logic-level translator from Analog Devices enabling voltage translation between 1.2 V, 1.8 V, 2.5 V, 3.3 V, and 5 V logic domains. Supports data rates up to 100 Mbps with automatic direction sensing requiring no direction control pin. Packaged in a 6-pin SOT-23 package for minimal board footprint in mixed-voltage embedded systems.

16-Bit, 100 kSPS/200 kSPS BiCMOS A/D Converter

Input/Output Operational Amplifier

Digital Audio Processor

1 Circuit IC Switch 8:1 11.5Ohm 20-TSSOP

Dual SPDT Switch

ADC

Analog Devices ADCMP600BKSZ-RL is a very fast rail-to-rail single-supply comparator operating from 2.5 V to 5.5 V with push-pull TTL/CMOS output and 5 mV maximum input offset voltage in a 5-pin SC-70 package. Ideal for threshold detection and signal conditioning in portable and high-speed digital systems. Available from stock with worldwide shipping.

ADC

Analog Devices ADE7518ASTZF16-RL is a single-phase energy measurement IC with high-accuracy active and reactive energy calculation, multiple analog inputs, and serial communication in a 64-pin LQFP package. It is designed for residential and commercial electricity metering applications requiring IEC and ANSI compliance.

CMOS Output Clock Generator

ADA4938-1ACPZ-R2 is an ultralow distortion fully differential ADC driver amplifier from Analog Devices, featuring 75dB CMRR and 18µA max bias current in a 16-pad QFN package. It is optimized for driving high-resolution ADC inputs with voltage-feedback architecture and internal frequency compensation. Available from stock worldwide with competitive pricing.

Low Cost CMOS, High Speed, Rail-to-Rail Amplifiers (Dual)

ADC

Low Cost, High Speed, Rail-to-Rail, Output Op Amp (Quad)

Analog-to-Digital Converter

Low Cost CMOS, High Speed, Rail-to-Rail Amplifiers

Fiber Channel/Ethernet Clock Generator IC 7 Clock Outputs

Network Clock Generator, Two Outputs

24 MHz Rail-to-Rail Amplifiers with Shutdown Option

Analog-to-Digital Converter

ADA4051-1ARJZ-RL is a Analog Devices integrated circuit for embedded, industrial, and mixed-signal electronic designs. It provides manufacturer-backed specifications for compact PCB layouts and purchasing checks. From RFQ pricing, it supports in-stock sourcing and worldwide shipping.

Low Power, Low Noise, Low Bias Current, Precision Dual RRO Op Amp

Low Power, 3.6 MHz, Low Noise, Rail-to-Rail Output, Operational Amplifiers

The ADA4627-1BRZ-RL is a high-speed JFET op-amp with 30 V supply, 5 fA typical input bias current, and 116 dB common-mode rejection ratio. It combines low noise and wide bandwidth in a voltage-feedback architecture for precision signal conditioning. Available on tape-and-reel from stock with worldwide shipping.

Dual 10-bit/12-bit, 100 MSPS ADC ► SNR = 67 dB, fIN = 30.1 MHz ► Dual 10-bit/12-bit, 170 MSPS DAC ► ACLR = 74 dBc ► 5 channels of analog auxiliary input/output ► Low power, <425 mW at maximum sample rates ► Supports full and half-duplex data interfaces ► Small 72-lead LFCSP lead-free package

30 V, High Speed, Low Noise, Low Bias Current, JFET Operational Amplifier

6-Output Clock Generator

Low Power, 3.6 MHz, Low Noise, Rail-to-Rail Output, Operational Amplifiers

Micropower RRIO Operational Amplifier

Fiber Channel/Ethernet Clock Generator IC 7 Clock Outputs

16 V, 1 MHz, CMOS Rail-to-Rail Input/Output Operational Amplifier

ADC

1.8 V Dual Analog-to-Digital Converter

Low Cost CMOS, High Speed, Rail-to-Rail Amplifier (Triple)

14-Bit 1.8 V Dual Analog-to-Digital Converter

ADA4691-2ACPZ-RL is a dual, low-power, wideband, low-noise op-amp with rail-to-rail output by Analog Devices. Key specs: 98 dB CMRR, 0.36 nA maximum bias current, voltage-feedback architecture in a 10-pin LFCSP package. Available from stock with worldwide shipping.

ADC

Precision JFET High Speed Dual Op Amp

Battery Sensor

Embedded Processor

Quad-Channel Isolators with Integrated DC-to-DC Converter

Embedded Processor

ADSP-BF512BSWZ-4 is a 32-bit fixed-point Blackfin embedded processor from Analog Devices, clocked up to 400 MHz with a 19-bit address bus and 16-bit external data bus, packaged in a 176-pin quad flat package.

ADSP-BF512BBCZ-4F4 is an Analog Devices Blackfin 32-bit fixed-point embedded processor running at up to 400 MHz with a 19-bit address bus, 16-bit external data bus, and boundary scan in a 168-ball BGA package. Available from stock worldwide with fast shipping.

TMP05BRTZ is a Analog Devices sensor for measurement and control systems. It provides 5 pins and IC PWM Temperature Sensor. From RFQ pricing, in-stock sourcing supports worldwide shipping.

TMP05ARTZ is a PWM digital temperature sensor IC from Analog Devices, operating from 3.3 V to 5.5 V supply with ±1°C accuracy over a -40°C to +150°C range. Available in SOT-23 package with worldwide shipping.

Analog Devices ADR121AUJZ-R2 is a precision micropower LDO voltage reference providing a 2.5 V output in a tiny TSOT-6 package. It delivers tight output accuracy of ±2.4 mV and ultra-low supply current, ideal for portable instrumentation and ADC reference applications.

SOIC-8