Analog Devices

OPERATIONAL AMPLIFIER

SSM2356CBZ-RL is a stereo Class D audio amplifier IC from Analog Devices featuring 18 dB gain, 20 kHz bandwidth, and dual-channel output. Available in a compact 16-ball BGA package for space-constrained designs.

TMP05BRTZ-REEL7 is a PWM output digital temperature sensor from Analog Devices with ±0.5°C typical accuracy and a single-wire duty-cycle encoded output. It operates over a -40°C to +125°C range and requires no ADC on the host side, simplifying temperature readout in space-constrained designs. Packaged in a tiny 5-pin SC-70 (SOT-353) surface-mount package.

Dual/Quad, Low Power, High Speed JFET Operational Amplifiers

Analog Devices ADXRS620WBBGZA-RL is a ±300°/s single-axis MEMS yaw-rate gyroscope with analog voltage output in a 7 mm x 7 mm ceramic BGA-32 package. Designed for high-vibration and shock environments with integrated signal processing. Available worldwide with fast shipping.

The SSM2603CPZ-REEL7 is a low power stereo audio codec from Analog Devices featuring integrated ADC, DAC, and headphone driver in a 28-pin QFN package. It operates from a 3.3 V supply with 24-bit resolution at up to 96 kHz sample rate. Available in tape-and-reel packaging for high-volume production.

Analog Devices ADSP-BF514KSWZ-4F4 is a 32-bit Blackfin embedded processor running at up to 400 MHz with 16-bit external data bus and boundary scan support. It integrates fixed-point DSP with a microcontroller, offering 19-bit address bus width in a 176-pin QFP package. Available from stock with worldwide shipping.

800 MHz, 4:1 Analog Multiplexer

Precision JFET High Speed Dual Op Amp

Instrumentation Amplifier 1 Circuit 18-CDIP

1 kV RMS Quad-Channel Digital Isolator

SSM2375CBZ is a Class D audio power amplifier IC from Analog Devices, delivering up to 2.8 W output power from a 5 V supply with 90% efficiency. It features shutdown mode, filterless PWM output, and low EMI design. From $1.50, in stock, worldwide shipping.

The SSM2018TPZ is a voltage controlled amplifier IC by Analog Devices in a 16-pin DIP package, offering precise gain control for audio and signal processing. Features wide dynamic range and low distortion. Available from authorized distributors with worldwide shipping.

Octal 8-bit CMOS D/A Converter

Operational Amplifiers

Operational Amplifier

Quad-Channel Isolators with Integrated DC-to-DC Converter

Accelerometer

12 Bit Digital to Analog Converter 2 24-PDIP

±300°/sec Yaw Rate Gyro

Quad-Channel Isolators with Integrated DC-to-DC Converter

800 MHz, 4:1 Analog Multiplexer

ADSP-BF512KSWZ-4F4 is a 32-bit Blackfin embedded processor from Analog Devices running at up to 400 MHz with a 16-bit external data bus. It integrates a dual-MAC fixed-point DSP core, 176-pin LQFP package, JTAG boundary scan, and on-chip peripherals for embedded control and signal processing applications.

±300°/sec Yaw Rate Gyro

Dual-Channel Digital Isolators Enhanced System-Level ESD Reliability

Quad-Channel Isolators with Integrated DC-to-DC Converter

The ADUC7039BCP6Z-RL is a precision battery sensor IC from Analog Devices integrating a 16-bit ADC, ARM7TDMI core, and analog front-end for accurate current and voltage measurement. Features -40°C to 125°C operation in a compact 32-lead QFN package. Available from stock worldwide.

Isolated 4 A Dual-Channel Gate Driver

FEATURES Enhanced system-level ESD performance per IEC 61000-4-x Safety and regulatory approvals UL recognition: 5000 V rms for 1 minute per UL 1577 CSA Component Acceptance Notice #5A IEC 60950-1: 380 V rms (reinforced) VDE Certificate of Conformity DIN V VDE V 0884-10 (VDE V 0884-10):2006-12 VIORM = 849 V peak Low power operation 5 V operation 1.4 mA per channel maximum @ 0 Mbps to 1 Mbps 4.3 mA per channel maximum @ 10 Mbps 3.3 V operation 0.9 mA per channel maximum @ 0 Mbps to 1 Mbps 2.4

Quad-Channel Isolators with Integrated DC-to-DC Converter

DC-to-DC Converter

Quad-Channel Isolators with Integrated DC-to-DC Converter

5 kV RMS Quad-Channel Digital Isolators

Integrated, Precision Battery Sensor

Quad-Channel Isolators with Integrated DC-to-DC Converter

Quad-Channel Isolators with Integrated DC-to-DC Converter

Precision Analog Microcontroller

Quad-Channel Isolators with Integrated DC-to-DC Converter

Step-Down DC-to-DC Regulator

DC-to-DC Converter

5 kV RMS Quad-Channel Digital Isolators

Dual-Channel, Digital Isolators,Enhanced System-Level ESD Reliability

5 kV RMS Quad-Channel Digital Isolators

Precision Analog Microcontroller,

5 kV RMS Quad-Channel Digital Isolators

The ADUM5401WCRWZ-RL is a quad-channel digital isolator with integrated DC-to-DC converter from Analog Devices, providing 4 isolated digital channels and an isolated power supply in a 16-pin SOIC package. It offers up to 2.5 kV RMS isolation for robust noise immunity. Available worldwide with competitive pricing.

Enhanced system-level ESD performance per IEC 61000-4-x Safety and regulatory approvals UL recognition: 5000 V rms for 1 minute per UL 1577 CSA Component Acceptance Notice #5A IEC 60950-1: 380 V rms (reinforced) VDE Certificate of Conformity DIN V VDE V 0884-10 (VDE V 0884-10):2006-12 VIORM = 849 V peak Low power operation 5 V operation 1.4 mA per channel maximum @ 0 Mbps to 1 Mbps 4.3 mA per channel maximum @ 10 Mbps 3.3 V operation 0.9 mA per channel maximum @ 0 Mbps to 1 Mbps 2.4 mA per cha

Blackfin Embedded Processor

5 kV RMS Quad-Channel Digital Isolators

ROHS COMPLIANT, MS-013AC, SOIC-16