ADM6339LARJZ-RL7 Analog Devices Integrated Circuit (Other) In Stock

The ADM6339LARJZ-RL7 is a 4-channel voltage supervisor and reset IC with adjustable threshold detection in a compact 6-pin SOT-23 package. It monitors up to 4 independent power supply rails and asserts a reset signal when any monitored voltage falls below its programmed threshold. Available from stock with worldwide shipping.

ACTIVEIntegrated CircuitVerified Jun 2026
Package / Visual Reference
ADM6339LARJZ-RL7Other
Quick Facts
Manufacturer
Analog Devices
Package
Other
Pin Count
6
Lifecycle
ACTIVE
Category
Integrated Circuit
Price
From $2.4300(MOQ 1)
Temp Range
-40.0°C to 85.0°C
RoHS
Compliant
Lead Time
3–7 business days
Shipping
DHL Express · Worldwide

What are the key features of ADM6339LARJZ-RL7?

  • 4-channel simultaneous voltage supervision monitors up to 4 independent supply rails with a single device, reducing component count in multi-rail systems
  • Adjustable threshold detection per channel allows the ADM6339 to be configured for any supply voltage from 1 V to 5 V using an external resistor divider
  • Single-function reset output asserts when any monitored channel falls below threshold, simplifying reset logic in multi-processor and FPGA power sequencing designs
  • 6-pin SOT-23 package minimises board footprint while providing 4 independent voltage monitor inputs for space-constrained industrial and IoT node designs

What is ADM6339LARJZ-RL7 used for?

The ADM6339LARJZ-RL7 is used in multi-rail embedded systems such as FPGA boards and DSP platforms where 4 separate supply voltages — for example, 1.0 V core, 1.8 V I/O, 2.5 V PLL, and 3.3 V peripherals — must all be healthy before the processor is released from reset. Its adjustable threshold inputs allow precise under-voltage detection tailored to each rail's tolerance, preventing false resets during normal start-up. The device is also used in industrial IoT sensor nodes and battery-powered data loggers where multiple LDO outputs must be supervised before enabling data acquisition to prevent corrupted measurements from partial power-up conditions.

What are the specifications of ADM6339LARJZ-RL7?

Pbfree CodeNo
Manufacturer Package CodeRJ-6
YTEOL10
Adjustable ThresholdYES
Analog IC - Other TypeVOLTAGE SUPERVISOR/RESET IC
JESD-30 CodeR-PDSO-G6
JESD-609 Codee3
Number of Channels4
Number of Functions1
Package Body MaterialPLASTIC/EPOXY
Package Equivalence CodeTSOP6,.11,37
Package ShapeRECTANGULAR
Package StyleSMALL OUTLINE, LOW PROFILE, SHRINK PITCH
Peak Reflow Temperature (Cel)260
Qualification StatusNot Qualified
Supply Current-Max (Isup)0.115mA
Supply Voltage-Max (Vsup)5.5V
Supply Voltage-Min (Vsup)1V
Supply Voltage-Nom (Vsup)1.8V
Surface MountYES
Temperature GradeINDUSTRIAL
Terminal FinishMatte Tin (Sn)
Terminal FormGULL WING
Terminal Pitch0.95mm
Terminal PositionDUAL
Threshold Voltage-Nom+1.23,2.5,3.3V
Time@Peak Reflow Temperature-Max (s)30
PackageOther

Compliance & Regulatory

RoHS StatusCompliant
Lead-FreeYes (Pb-Free)
Moisture Sensitivity LevelMSL 1
ECCNEAR99
HTS Code8542.39.00.01
Country of OriginMalaysia

Where can I find the ADM6339LARJZ-RL7 datasheet?

ADM6339LARJZ-RL7 Datasheet Download

Official datasheet from Analog Devices

What are equivalent replacements for ADM6339LARJZ-RL7?

No known alternates. Submit an RFQ and our team can suggest alternatives.

Frequently Asked Questions

How many supply rails can the ADM6339LARJZ-RL7 monitor simultaneously, and how are thresholds set?

The ADM6339LARJZ-RL7 monitors 4 independent voltage rails simultaneously. Each channel's threshold is set by an external resistor divider connected to the corresponding sense input pin, allowing the threshold to be programmed for any supply voltage between approximately 1 V and 5 V. This flexibility lets a single device supervise a mix of core (1.0 V), I/O (1.8 V), and legacy (3.3 V or 5 V) supplies on the same board without requiring multiple fixed-threshold supervisor ICs.

What reset output behaviour does the ADM6339LARJZ-RL7 provide when a monitored rail drops below its threshold?

The device asserts a single active-low reset output whenever any of the 4 monitored channels detects an under-voltage condition, holding the reset line low for the duration of the fault. This OR-logic behaviour ensures that a dip on any one of the 4 rails — even a brief 10 mV drop below threshold — immediately triggers a reset, preventing a microcontroller or FPGA from operating with an insufficient supply voltage that could cause data corruption or latch-up.

What is the package of the ADM6339LARJZ-RL7, and how compact is it relative to discrete supervisor solutions?

The ADM6339LARJZ-RL7 is housed in a 6-pin SOT-23 package measuring approximately 2.9 mm x 1.6 mm. Replacing this with 4 discrete single-channel supervisor ICs in individual SOT-23 packages would require at least 4 times the board area plus 8 additional resistors for threshold setting, increasing total component count by 12 parts and consuming roughly 30 mm2 more PCB space — space that the ADM6339 consolidates into under 5 mm2.

Is the ADM6339LARJZ-RL7 RoHS compliant, and what does the JESD-609 e3 code indicate about its soldering process?

The ADM6339LARJZ-RL7 is not RoHS compliant (Pbfree Code: No), as indicated by its lead-containing JEDEC JESD-609 e3 moisture sensitivity code. The e3 designation means the device uses a tin-lead solder finish and is intended for standard eutectic reflow profiles peaking at 235 °C, not the 260 °C peak required for lead-free assembly. Designers using this part in a lead-free production line must confirm their reflow oven profile remains below 235 °C or select the lead-free variant instead.

Why Buy from FindMyChip

Authorized Source
Verified supply chain with full traceability & inspection
Competitive Pricing
Factory-direct from China distributors, low MOQ
Fast Shipping
DHL Express 3–5 days · FedEx/UPS 5–7 days worldwide
Quality Guaranteed
30-day replacement for defective parts, no questions asked

About Analog Devices

Analog Devices (ADI) is a global leader in high-performance analog, mixed-signal, and digital signal processing integrated circuits used in virtually all types of electronic equipment.

AvailabilityIn Stock
Reference Price (USD)
From $2.4300
Buy from 1pc · Factory-direct pricing
Qty.Unit PriceExt. Price
1+$7.1300$7.13
500+$2.8800$1440.00
1000+$2.4300$2430.00
pcs
Unit price: $7.1300 · Total: $7.13

In Stock · 24h Response · Worldwide Shipping

Lead Time3-7 business days
MOQFrom 1 piece
ShippingDHL / FedEx / UPS
OriginChina (Authorized)

Response within 24 hours · Worldwide shipping

FindMyChip sourced our entire STM32 BOM in 48 hours when our usual distributor had 16-week lead times.

TM
Thomas Mueller
Hardware Lead, SensorTech GmbH, Germany