LT6004CMS8#TRPBF Analog Devices Integrated Circuit (Small Outline Packages) In Stock
Analog Devices LT6004CMS8#TRPBF is a dual precision rail-to-rail input and output op-amp operating from a 1.6 V supply with 825 µV maximum input offset voltage and 100 dB typical CMRR. It is housed in an 8-pin MSOP package suitable for low-voltage, low-power sensor signal conditioning. Available from authorized distributors with worldwide shipping.
- Manufacturer
- Analog Devices
- Package
- Small Outline Packages
- Pin Count
- 8
- Lifecycle
- ACTIVE
- Datasheet
- LT6004CMS8#TRPBF Datasheet PDF
- Category
- Integrated Circuit
- Price
- From $1.6125(MOQ 19)
- Temp Range
- ?°C to 70.0°C
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
What are the key features of LT6004CMS8#TRPBF?
- Dual rail-to-rail input and output architecture supports signal swing from 0 V to supply rail on both input and output for maximum dynamic range at 1.6 V supply
- 825 µV maximum input offset voltage and 100 dB typical CMRR deliver precision performance in low-level sensor signal conditioning applications
- Ultra-low bias current of 0.0001 µA (100 pA max) enables accurate signal processing from high-impedance sensors such as photodiodes and pH electrodes
- 1.6 V minimum supply voltage operation makes the LT6004 ideal for single-cell battery and energy-harvesting powered portable instruments
What is LT6004CMS8#TRPBF used for?
The LT6004CMS8#TRPBF is designed for precision signal conditioning in portable medical instruments, battery-powered sensor nodes, and low-voltage data acquisition systems where supply voltages as low as 1.6 V are used. Its rail-to-rail input and output capability combined with a 100 dB CMRR makes it well-suited for Wheatstone bridge amplification, thermocouple conditioning, and transimpedance amplifier circuits driving high-impedance sources. The dual op-amp configuration in the compact MSOP-8 package enables two independent amplification channels in applications such as differential analog front ends and active filter stages.
What are the specifications of LT6004CMS8#TRPBF?
| Pbfree Code | No |
| Manufacturer Package Code | 05-08-1660 |
| YTEOL | 10 |
| Amplifier Type | OPERATIONAL AMPLIFIER |
| Architecture | VOLTAGE-FEEDBACK |
| Average Bias Current-Max (IIB) | 0.0001 µA |
| Common-mode Reject Ratio-Min | 82dB |
| Common-mode Reject Ratio-Nom | 100dB |
| Frequency Compensation | YES |
| Input Offset Voltage-Max | 825 µV |
| JESD-30 Code | S-PDSO-G8 |
| JESD-609 Code | e3 |
| Low-Bias | YES |
| Low-Offset | NO |
| Micropower | NO |
| Neg Supply Voltage Limit-Max | -9 V |
| Neg Supply Voltage-Nom (Vsup) | -8 V |
| Number of Functions | 2 |
| Package Body Material | PLASTIC/EPOXY |
| Package Equivalence Code | TSSOP8,.19 |
| Package Shape | SQUARE |
| Package Style | SMALL OUTLINE, THIN PROFILE, SHRINK PITCH |
| Packing Method | TR |
| Peak Reflow Temperature (Cel) | 260 |
| Power | NO |
| Programmable Power | NO |
| Qualification Status | Not Qualified |
| Slew Rate-Min | 550V/us |
| Slew Rate-Nom | 1300V/us |
| Supply Current-Max | 0.0038mA |
| Supply Voltage Limit-Max | 9V |
| Supply Voltage-Nom (Vsup) | 8V |
| Surface Mount | YES |
| Technology | BIPOLAR |
| Temperature Grade | COMMERCIAL |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Form | GULL WING |
| Terminal Pitch | 0.65mm |
| Terminal Position | DUAL |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Unity Gain BW-Nom | 3 |
| Voltage Gain-Min | 350000 |
| Wideband | NO |
| Package | Small Outline Packages |
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
| Moisture Sensitivity Level | MSL 1 |
| ECCN | EAR99 |
| HTS Code | 8542.33.00.01 |
| Country of Origin | Malaysia |
Where can I find the LT6004CMS8#TRPBF datasheet?
LT6004CMS8#TRPBF Datasheet DownloadOfficial datasheet from Analog Devices
What are equivalent replacements for LT6004CMS8#TRPBF?
No known alternates. Submit an RFQ and our team can suggest alternatives.
Frequently Asked Questions
What is the minimum supply voltage for the LT6004CMS8#TRPBF, and why does it suit battery-powered designs?
The LT6004CMS8#TRPBF operates from a minimum supply voltage of 1.6 V, enabling direct use with single-cell lithium-ion batteries or energy-harvesting sources. Its rail-to-rail input and output swing ensures full dynamic range is preserved even as the battery voltage decreases during discharge in portable medical and IoT sensor devices.
How does the 100 dB CMRR of the LT6004CMS8#TRPBF benefit differential sensor measurements?
A 100 dB typical common-mode rejection ratio means the LT6004 attenuates common-mode noise by a factor of 100,000, which is critical in Wheatstone bridge strain gauge and thermocouple amplifier circuits where the differential signal may be as small as 1 mV superimposed on a several-volt common-mode voltage.
What bias current specification makes the LT6004CMS8#TRPBF suitable for high-impedance source applications?
The LT6004 features a maximum bias current of 0.0001 µA (100 pA), allowing it to interface directly with high-impedance sources such as photodiodes, pH electrodes, or capacitive sensors without introducing significant input error voltage from current flowing through the source impedance, even when source resistance exceeds 10 MΩ.
What is the input offset voltage specification of the LT6004CMS8#TRPBF, and how does it compare to general-purpose op-amps?
The LT6004CMS8#TRPBF has a maximum input offset voltage of 825 µV, which is significantly tighter than general-purpose op-amps that commonly specify 1 mV to 5 mV offset. This precision is important in 12-bit and 14-bit ADC front-end circuits where offset errors exceeding 1 LSB—approximately 0.5 mV at 5 V full scale—would reduce effective resolution.
Related Guides
CSD87313DMS Synchronous Buck Power Stage Design Guide
Design a compact CSD87313DMS synchronous buck stage with practical guidance for loss, gate drive, PCB layout, EMI, thermal validation, and sourcing.
Aug 6, 2026
STEF05SGR eFuse Selection Guide for 5 V Overcurrent Protection
Choose STEF05SGR for 5 V overcurrent protection by checking current-limit margin, inrush, thermal loss, fault response, and sourcing.
Aug 6, 2026
C0402C103K3RACTU Selection Guide: Choosing a 10 nF 0402 MLCC
Select C0402C103K3RACTU by voltage margin, X7R behavior, tolerance, 0402 assembly risk, and qualified alternatives.
Aug 4, 2026
STM32H753VIT6 MCU Selection Guide: Memory, Package, Connectivity, and Security
Choose STM32H753VIT6 by evaluating memory architecture, LQFP-100 pin fit, connectivity, security, power, and sourcing tradeoffs.
Aug 4, 2026
Why Buy from FindMyChip
About Analog Devices
Analog Devices (ADI) is a global leader in high-performance analog, mixed-signal, and digital signal processing integrated circuits used in virtually all types of electronic equipment.
More from Analog Devices
LT3062EDCB#TRPBF
Small Outline No-lead
Integrated Circuit
LT3062EDCB#TRMPBF
Small Outline No-lead
Integrated Circuit
LT8641IUDC#TRPBF
Other
Integrated Circuit
HMC412AMS8GTR
Small Outline Packages
Integrated Circuit
LT3062HMS8E#PBF
Small Outline Packages
Integrated Circuit
LT3062IMS8E#PBF
Small Outline Packages
Integrated Circuit
| Qty. | Unit Price | Ext. Price |
|---|---|---|
| 19+ | $1.9600 | $37.24 |
| 500+ | $1.7313 | $865.66 |
| 1000+ | $1.6125 | $1612.50 |
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“The anti-counterfeit verification gave us confidence we'd never had with other China suppliers.”
You May Also Like
ACS770ECB-200U-PFF-T
Allegro Microsystems
Integrated Circuit
ACS770KCB-150U-PFF-T
Allegro Microsystems
Integrated Circuit
MC33901WEF
NXP
Integrated Circuit
MC7808BDTRKG
ON Semiconductor
Integrated Circuit
PA94EC
Apex Microtechnology
Integrated Circuit
AP7315-28SR-7
Diodes Inc.
Integrated Circuit
74HCT245D
Nexperia
Integrated Circuit
CY62256VNLL-70ZXCT
Cypress Semiconductor
Integrated Circuit
EPM7032AETC44-4N
Intel
Integrated Circuit
EPM3512AQC208-10N
Intel
Integrated Circuit
EPM3256ATC144-7N
Intel
Integrated Circuit
EPM3256AQC208-7N
Intel
Integrated Circuit
EPM3256AQC208-10N
Intel
Integrated Circuit
EPM3128ATC100-7N
Intel
Integrated Circuit
EPM1270F256C4N
Intel
Integrated Circuit
EPF8282ATC100-4N
Intel
Integrated Circuit
EPF6016QC208-2N
Intel
Integrated Circuit
EPF6016ATC144-3N
Intel
Integrated Circuit
EPF10K30ATC144-3N
Intel
Integrated Circuit
EPC2TI32N
Intel
Integrated Circuit
EPC2LC20
Intel
Integrated Circuit
EP3SL150F1152C4N
Intel
Integrated Circuit
EP2SGX60DF780C5N
Intel
Integrated Circuit
EP2SGX60CF780C5N
Intel
Integrated Circuit