MT48LC16M16A2F4-6A:GTR Alliance Memory Integrated Circuit (BGA) In Stock

The Alliance Memory MT48LC16M16A2F4-6A:GTR is a 256 Mbit (16M x 16-bit) synchronous DRAM (SDRAM) in a 54-ball BGA package, rated at 166 MHz with a 6 ns cycle time and commercial temperature range. It provides a 16-bit wide data bus, tape-and-reel packaging, and is suited for embedded processor memory expansion in networking, industrial, and consumer electronics applications.

ACTIVEIntegrated CircuitVerified Jun 2026
Package / Visual Reference
MT48LC16M16A2F4-6A:GTRBGA
Quick Facts
Manufacturer
Alliance Memory
Package
BGA
Pin Count
54
Lifecycle
ACTIVE
Category
Integrated Circuit
RoHS
Compliant
Lead Time
3–7 business days
Shipping
DHL Express · Worldwide

Key Features

  • 256 Mbit (16M x 16-bit) SDRAM with 166 MHz clock and 6 ns cycle time for high-bandwidth embedded processor memory applications
  • 54-ball BGA package in tape-and-reel format enabling automated SMT assembly in compact embedded computing and networking hardware
  • 16-bit wide data bus with 4-bank architecture and commercial temperature range for cost-effective system memory in industrial and consumer designs

Applications

The MT48LC16M16A2F4-6A:GTR is used as main system DRAM in embedded Linux platforms, single-board computers, and network switches where 256 Mbit of 16-bit wide SDRAM provides adequate bandwidth for OS operation and packet buffering. Industrial HMI panels and video processing boards use this device as frame buffer memory thanks to its 166 MHz data rate and compact 54-ball BGA form factor. Consumer electronics such as set-top boxes, DSL modems, and IP cameras also deploy this SDRAM for local data buffering and firmware execution at low system cost.

Compliance & Regulatory

RoHS StatusCompliant
Lead-FreeYes (Pb-Free)

Datasheet

MT48LC16M16A2F4-6A:GTR Datasheet Download

Official datasheet from Alliance Memory

Alternate & Equivalent Parts

No known alternates. Submit an RFQ and our team can suggest alternatives.

Frequently Asked Questions

What clock speed and data bus width does the MT48LC16M16A2F4-6A:GTR provide for an embedded Linux application processor?

The MT48LC16M16A2F4-6A:GTR operates at up to 166 MHz with a 6 ns cycle time and a 16-bit wide data bus, delivering a peak transfer bandwidth of approximately 332 MB/s. This is sufficient for running embedded Linux kernels on 32-bit application processors at clock speeds up to 200 MHz, where the 256 Mbit (32 MB) capacity accommodates the kernel, root filesystem, and application memory simultaneously. The 4-bank architecture allows bank interleaving to reduce effective memory latency during sequential access patterns common in OS page table walks.

Which networking and industrial board designs benefit most from the MT48LC16M16A2F4-6A's 54-ball BGA and tape-and-reel packaging?

Network switch line cards, industrial gateway controllers, and Ethernet router boards benefit from the 54-ball BGA footprint of the MT48LC16M16A2F4-6A, which consumes roughly 50% less PCB area than a comparable 54-pin TSOP-II package. The tape-and-reel (:GTR suffix) format enables fully automated pick-and-place assembly at throughput rates exceeding 5,000 units per hour on modern SMT lines, reducing per-unit assembly cost in high-volume networking equipment manufacturing. Industrial control boards in factory automation and building management systems also benefit from the compact BGA for fitting 256 Mbit of SDRAM into dense multi-chip module layouts.

How does the leaded (non-RoHS) composition of the MT48LC16M16A2F4-6A:GTR affect its use in modern commercial electronics compared to lead-free SDRAM alternatives?

The MT48LC16M16A2F4-6A:GTR is described as a leaded device, meaning it falls outside standard RoHS Directive 2011/65/EU requirements for consumer electronics sold in the EU and many other markets. This makes it unsuitable for most commercial consumer products such as smartphones, tablets, and laptops where RoHS compliance is mandatory. However, industrial, military, and aerospace applications often permit leaded solder under specific exemptions, and the leaded device may offer advantages in high-reliability solder joint integrity at operating temperatures above 85°C. Designers targeting RoHS-compliant commercial products should source a lead-free SDRAM alternative such as an equivalent Alliance Memory part with an 'IT' or 'PBF' suffix to ensure regulatory compliance.

Related Guides

Why Buy from FindMyChip

Authorized Source
Verified supply chain with full traceability & inspection
$
Competitive Pricing
Factory-direct from China distributors, low MOQ
Fast Shipping
DHL Express 3–5 days · FedEx/UPS 5–7 days worldwide
Quality Guaranteed
30-day replacement for defective parts, no questions asked

About Alliance Memory

Alliance Memory is a leading electronic component manufacturer. FindMyChip sources Alliance Memory ICs directly from authorized China distributors, offering competitive pricing and reliable stock.

AvailabilityIn Stock
Reference Price (USD)
Contact for Price
Buy from 1pc · Factory-direct pricing
pcs

In Stock · 24h Response · Worldwide Shipping

Lead Time3-7 business days
MOQFrom 1 piece
ShippingDHL / FedEx / UPS
OriginChina (Authorized)

Response within 24 hours · Worldwide shipping

We've been using FindMyChip for 2 years. Pricing is consistently 20-30% below Mouser/DigiKey for volume orders.

SK
Sarah Kim
VP Engineering, NovaBit Electronics, South Korea