TL062ACD Texas Instruments op-amps (SOIC-8) In Stock
TL062ACD is a low-power JFET-input dual op-amp by Texas Instruments, 1MHz bandwidth, 18V max supply, SOIC-8 package, from $0.32, in stock, ships globally, 1-piece minimum.
- Manufacturer
- Texas Instruments
- Package
- SOIC-8
- Pin Count
- 8
- Lifecycle
- ACTIVE
- Datasheet
- TL062ACD Datasheet PDF
- Category
- op-amps
- Price
- From $0.2200(MOQ 1)
- Temp Range
- -40.0°C to 125.0°C
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
What is TL062ACD used for?
The TL062ACD is widely used in battery-powered instrumentation, portable medical devices, and sensor signal conditioning circuits. Its low quiescent current makes it ideal for IoT edge nodes, handheld test equipment, and audio preamplifier stages where power efficiency is critical.
What are the specifications of TL062ACD?
| Supply Voltage | +/-18V (36V single supply) |
| Input Bias Current | 30pA typical |
| Supply Current | 200uA per amplifier |
| Unity-Gain Bandwidth | 1MHz |
| Slew Rate | 3.5V/us |
| Input Offset Voltage | 6mV maximum |
| Operating Temperature | -40C to +125C |
| Package | SOIC-8 |
Compliance & Regulatory
| RoHS Status | Compliant |
| Lead-Free | Yes (Pb-Free) |
| Moisture Sensitivity Level | MSL 1 |
Where can I find the TL062ACD datasheet?
TL062ACD Datasheet DownloadOfficial datasheet from Texas Instruments
What are equivalent replacements for TL062ACD?
Compatible alternatives and drop-in replacements for TL062ACD:
Frequently Asked Questions
What is the TL062ACD and what makes it different from TL072?
The TL062ACD is a low-power JFET-input dual operational amplifier from Texas Instruments. Compared to the TL072, the TL062A consumes significantly less supply current (200uA vs 1.4mA per amplifier), making it the preferred choice for battery-operated equipment, while sharing the same JFET input stage for high input impedance and low noise performance.
What are the key electrical specifications of TL062ACD?
The TL062ACD operates from +/-2.5V to +/-18V (or 5V to 36V single supply), draws only 200uA quiescent current per amplifier, offers 1MHz unity-gain bandwidth, 3.5V/us slew rate, 30pA input bias current, and operates across -40C to +125C. It is housed in an SOIC-8 (D) package with 8 pins.
What applications is TL062ACD suitable for?
TL062ACD excels in portable and battery-powered designs: IoT sensor nodes, handheld instruments, medical wearables, audio preamplifiers, active filters, and precision signal conditioning. Its low power consumption extends battery life significantly versus standard op-amps like the TL072 or LM358.
What are compatible replacement parts for TL062ACD?
Direct or functional equivalents include the TL062CP (DIP-8 through-hole version), LM2904 (lower power, bipolar input), MCP602 (2.7V to 5.5V micropower CMOS op-amp), and OPA2314 (rail-to-rail CMOS alternative). Pin-for-pin SOIC-8 replacements should be verified against supply voltage and bandwidth requirements.
Is TL062ACD RoHS compliant and what is the package marking?
Yes, the TL062ACD is RoHS compliant and lead-free (Pb-free). The D suffix denotes the SOIC-8 surface-mount package. MSL rating is Level 1 (unlimited floor life at <=30C/85% RH). The part is active and in production by Texas Instruments.
Related Guides
CDSOT23-SM712 RS-485 Interface Protection Design Guide
Design robust RS-485 protection with CDSOT23-SM712 using correct clamping, placement, grounding, termination, and surge coordination.
Jul 17, 2026
CR0805-FX-10R0ELF 10 Ohm 0805 Resistor Design Guide
Design CR0805-FX-10R0ELF into 0805 circuits with practical power, pulse, thermal, layout, tolerance, and sourcing checks.
Jul 17, 2026
How to Choose Würth Elektronik 150141-Series SMD Indicator LEDs
Choose 150141RS73100 and related Würth 150141 LEDs by color, brightness, 3528 package fit, drive margin, and procurement controls.
Jul 15, 2026
Molex 53398-0371 Selection Guide: Choosing a 3-Circuit Wire-to-Board Header
Choose Molex 53398-0371 by circuit count, mating system, derating, PCB geometry, assembly needs, and exact-suffix sourcing.
Jul 15, 2026
Why Buy from FindMyChip
About Texas Instruments
Texas Instruments (TI) is a global semiconductor company headquartered in Dallas, Texas. TI designs and manufactures analog and embedded processing chips used in industrial, automotive, consumer, communications, and enterprise systems.
More from Texas Instruments
| Qty. | Unit Price | Ext. Price |
|---|---|---|
| 1+ | $0.3200 | $0.32 |
| 10+ | $0.2800 | $2.80 |
| 100+ | $0.2200 | $22.00 |
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“Response time is incredible — usually under 4 hours. They understand that production lines can't wait.”