OPA4228UA Texas Instruments op-amps (SOIC) In Stock
OPA4228UA is Texas Instruments' quad precision op-amp with 3 nV/√Hz input noise, 138 dB CMRR, and ±18V supply range in a SOIC-14 package. From $7.84/unit, 1 pc MOQ, in stock with global shipping.
- Manufacturer
- Texas Instruments
- Package
- SOIC
- Pin Count
- 14
- Lifecycle
- ACTIVE
- Datasheet
- OPA4228UA Datasheet PDF
- Category
- op-amps
- Price
- From $6.0000(MOQ 1)
- Temp Range
- -40.0°C to 85.0°C
- RoHS
- Compliant
- Lead Time
- 3–7 business days
- Shipping
- DHL Express · Worldwide
What are the key features of OPA4228UA?
- Ultra-low voltage noise: 3 nV/√Hz at 1 kHz for precision signal chains
- Wide supply range: ±2.25V to ±18V covering single and dual supply designs
- High CMRR: 138 dB typical for superior common-mode rejection
- Low bias current: 10 nA typical, ideal for high-impedance sensor interfaces
- Quad channel in compact SOIC-14 package, saving board space
What is OPA4228UA used for?
OPA4228UA is well suited for precision instrumentation amplifiers, medical sensor front-ends, and industrial data acquisition systems. Its four matched channels and ultra-low noise make it ideal for audio measurement equipment, strain-gauge bridges, and thermocouple signal conditioning.
What are the specifications of OPA4228UA?
| Input Voltage Noise | 3nV/√Hz |
| Supply Voltage | ±2.25 to ±18V |
| CMRR | 138dB |
| Input Bias Current | 10nA |
| Gain Bandwidth Product | 33MHz |
| Operating Temperature | -40 to 85°C |
| Number of Channels | 4 |
| Supply Current per Channel | 3.5mA |
| Package | SOIC |
Compliance & Regulatory
| RoHS Status | Compliant |
Where can I find the OPA4228UA datasheet?
OPA4228UA Datasheet DownloadOfficial datasheet from Texas Instruments
What are equivalent replacements for OPA4228UA?
Compatible alternatives and drop-in replacements for OPA4228UA:
Same quad precision op-amp family, slightly higher noise (8 nV/√Hz) but lower cost; pin-compatible drop-in alternative
Quad precision op-amp with rail-to-rail output, ±5V to ±15V supply; suitable when output swing to supply rails is required
Frequently Asked Questions
How many op-amp channels does the OPA4228UA contain, and what package is used?
The OPA4228UA contains four independent op-amp channels in a SOIC-14 package. All four channels share identical precision specifications, making it easy to design matched differential or bridge circuits without component-to-component variation.
What supply voltage range does the OPA4228UA support?
The OPA4228UA operates from ±2.25V to ±18V dual supply (or 4.5V to 36V single supply). This wide range lets designers use it from battery-powered portable instruments up to industrial ±15V bench equipment without circuit redesign.
Is the OPA4228UA suitable for precision sensor signal conditioning?
Yes. With only 3 nV/√Hz input voltage noise and 138 dB CMRR, the OPA4228UA excels at amplifying small differential signals from strain gauges, RTDs, thermocouples, and bridge sensors in noisy industrial or medical environments.
What is the minimum order quantity and lead time for OPA4228UA?
FindMyChip stocks OPA4228UA with a minimum order quantity of 1 piece. Price breaks are available at qty 1 ($7.84), 2 ($7.00), 100 ($6.92), and 1000 ($6.00). Orders typically ship within a few business days globally.
What are common alternatives to the OPA4228UA?
Pin-compatible and functionally similar alternatives include the OPA4227 (lower cost, slightly higher noise at 8 nV/√Hz), the AD8664 from Analog Devices (rail-to-rail output, ±5V to ±15V), and the LT6014 from Analog Devices (1.1 nV/√Hz, higher performance). Select based on your noise budget and supply voltage.
Related Guides
CDSOT23-SM712 RS-485 Interface Protection Design Guide
Design robust RS-485 protection with CDSOT23-SM712 using correct clamping, placement, grounding, termination, and surge coordination.
Jul 17, 2026
CR0805-FX-10R0ELF 10 Ohm 0805 Resistor Design Guide
Design CR0805-FX-10R0ELF into 0805 circuits with practical power, pulse, thermal, layout, tolerance, and sourcing checks.
Jul 17, 2026
How to Choose Würth Elektronik 150141-Series SMD Indicator LEDs
Choose 150141RS73100 and related Würth 150141 LEDs by color, brightness, 3528 package fit, drive margin, and procurement controls.
Jul 15, 2026
Molex 53398-0371 Selection Guide: Choosing a 3-Circuit Wire-to-Board Header
Choose Molex 53398-0371 by circuit count, mating system, derating, PCB geometry, assembly needs, and exact-suffix sourcing.
Jul 15, 2026
Why Buy from FindMyChip
About Texas Instruments
Texas Instruments (TI) is a global semiconductor company headquartered in Dallas, Texas. TI designs and manufactures analog and embedded processing chips used in industrial, automotive, consumer, communications, and enterprise systems.
More from Texas Instruments
| Qty. | Unit Price | Ext. Price |
|---|---|---|
| 1+ | $7.8400 | $7.84 |
| 2+ | $7.0000 | $14.00 |
| 100+ | $6.9200 | $692.00 |
| 1000+ | $6.0000 | $6000.00 |
In Stock · 24h Response · Worldwide Shipping
Response within 24 hours · Worldwide shipping
“Response time is incredible — usually under 4 hours. They understand that production lines can't wait.”