Integrated Circuit
Integrated Circuit components are essential building blocks in modern electronic systems. FindMyChip sources Integrated Circuit ICs from authorized China distributors with competitive pricing and reliable stock.
77,666 components
How to Choose Integrated Circuit Components
- 1Verify electrical specifications (voltage, current, frequency) match your design requirements.
- 2Check package footprint and thermal characteristics against your PCB layout constraints.
- 3Confirm lifecycle status and long-term availability for production designs.
Popular Applications
Consumer Electronics
Smartphones, tablets, and smart home devices
Industrial Systems
Factory automation, control systems, and monitoring
Automotive
In-vehicle electronics and advanced driver assistance
Telecommunications
Base stations, routers, and network equipment
Integrated Circuit Guides & Articles
STM32H725IGT3 High-Performance MCU Design Guide
Design STM32H725IGT3 systems for reliable 550 MHz operation with practical power, clock, cache, DMA, PCB, ADC, and recovery guidance.
Jul 31, 2026
150141VS73100 Violet SMD LED Selection Guide: Color, Drive, and Sourcing
Select the 150141VS73100 by wavelength, brightness, drive current, 3528 fit, reliability, and traceable sourcing requirements.
Jul 31, 2026
STEF05SGR 5 V eFuse Protection Design Guide
Design a reliable 5 V STEF05SGR eFuse stage with current-limit math, capacitor sizing, thermal analysis, fault recovery, and PCB layout guidance.
Jul 30, 2026
S1J-E3/61T Rectifier Thermal Design, Surge, and Derating Guide
Practical S1J-E3/61T design guidance for thermal limits, inrush surge, PCB layout, voltage margin, and current derating.
Jul 30, 2026
All Integrated Circuit Components
Showing 49,651–49,700 of 77,666
Texas Instruments XA6843ABGABL is a voltage output IC with open-drain output range of 0.45V to 1.35V in a 10.4 x 10.4 mm BGA package. Surface-mount design introduced in 2020. Available from stock with worldwide shipping.
The SCAN16602SM/NOPB is a 16-bit bus transceiver from Texas Instruments with IEEE 1149.1 JTAG boundary scan support, enabling in-system testability. It integrates 16-channel unidirectional buffering with standard logic interface in a 64-pin BGA package. Ideal for high-density PCB designs requiring both bus transceiver functionality and board-level test access.
Voltage References Adjustable Precision Shunt Regulator
SN74CBT6800ADBQRG4 is a Texas Instruments integrated circuit for electronic designs. Key specs include 24 pins, SOIC, and datasheet-backed parameters. From inquiry quote with in stock worldwide shipping support.
Power Management Specialised - PMIC LP3907 Dual 1A and 600mA Buck Converters and Dual 300mA LDOs with I2C Interface 25-DSBGA -40 to 85
Bus Switch 2-Element CMOS 24-IN 56-Pin SSOP Tube
IC COUNTER BIN 4BIT U/D 16-DIP
ZIP, ZIP11,.2,.17,67TB
TLV320AIC12IDBT is a low-power mono voice-band CODEC IC from Texas Instruments supporting single-ended and differential analog inputs up to 2 V with integrated digital filter. Requires a 3.3 V analog supply and uses two's complement digital interface in a 30-pin TSSOP package. Available from stock with worldwide shipping.
Voltage References Lo-Vtg Adj Precision Shunt Regulator
Logic Gates Quadruple 2-Input Positive-OR Gates
Logic Gates Quad 2-Input Pos-OR
TPS70848PWPG4 is a integrated circuit for board-level control by Texas Instruments. Key specs: SOIC package, 20 pins, 500mA. From inquiry pricing, in stock with worldwide shipping.
Display Drivers & Controllers
Use the download button to access the ADC34J23IRGZR schematic symbol, PCB footprint, and 3D model.
The TMS320F280260DAS is a 32-bit Piccolo microcontroller from Texas Instruments in the TMS320 C28x CPU family, operating at up to 30 MHz with integrated ADC and JTAG boundary scan support in a 38-pin SOIC package. It targets real-time control applications in digital power supplies and motor drives. Available from stock with worldwide shipping.
Flip-Flops Octal D-Type Rgstr with 3-State Output
Bus Transceivers 3.3V ABT Octal Bus Xcvr/Reg
Inverters Hex Inverters
Interface - CODECs Lo-Pwr Mono Voice Band CODEC
Precision Amplifiers Quad Precision Sngl Supply Micropower
LM3S5B91-IBZ80-C5 is a Texas Instruments Stellaris 32-bit ARM Cortex-M3 microcontroller in a 108-pin BGA package, running up to 16.384 MHz with integrated ADC, DMA, and JTAG boundary scan for embedded control.
Precision Amplifiers Quad Precision Sngl Supply Micropower
IC AMP CLASS AB STEREO 14SOIC
Clock Drivers & Distribution 3.3V PLL Clock Drvr
Voltage References Lo-Vtg Adj Precision Shunt Regulator
SN74LVC863ANSRE4 is a 9-bit bidirectional bus transceiver from Texas Instruments in the LVC logic family with 3-state outputs and dual independent output enables. Supports 24 mA output sink current and independent control for each data direction in a 24-pin SOIC package. Available in stock worldwide with fast shipping.
The LM3704XBBP-232 is a single-channel voltage supervisor and reset IC from Texas Instruments, featuring manual reset input, power-fail input monitoring, and fixed threshold detection in a compact 9-ball BGA package.
Battery Management Complete Battery Fuel Gauge
LDO Voltage Regulators
UC3874N-2G4 is a high-efficiency synchronous step-down buck switching controller by Texas Instruments in an 18-pin DIP package. Key specs: current-mode PWM control, 12V to 36V input voltage range, and synchronous rectification for maximum efficiency. Available in stock with worldwide shipping.
Analog to Digital Converters - ADC 12-Bit 10us Serial CMOS Sampling
Modulator/Demodulator 1.7-6.0GHz Wide BW Dir Down Conv Rcvr
Battery Management Complete Battery Fuel Gauge
Battery Management Complete Battery Fuel Gauge
Analog to Digital Converters - ADC 12-Bit 10us Serial CMOS Sampling
The SN74BCT25244NSRE4 is an octal bus driver from Texas Instruments BCT family with 25-ohm incident wave switching for controlled impedance backplane drive. It supports unidirectional buffering with active-low output enable and 188 mA sink current capacity. Offered in a green, lead-free 24-pin SOP package for high-speed digital bus applications.
The SN74BCT25244NSRG4 is a 24-pin octal bus driver from Texas Instruments BCT family featuring 25-ohm incident wave switching for controlled impedance drive. It provides unidirectional buffering with active-low output enable and 188 mA sink current. Packaged in a 24-pin SOP for high-speed backplane bus driving applications.
Texas Instruments SN74BCT25244NSR is an octal bus driver and line driver featuring 25-ohm series resistors for incident wave switching and 3-state outputs. Supports unidirectional data flow with active-low enable control, 50 pF load capacitance, and 188 mA output current. Available in SOIC-24 package with RoHS-compliant lead-free construction, in stock worldwide with competitive pricing.
Audio DSPs Dig Audio SoC for multi-channel app
TPS2346PWG4 is a 4-channel optical network hot-swap controller from Texas Instruments in a 24-pin TSSOP package. It manages power sequencing and inrush current control for four independent channels to enable live board insertion without system disruption. Operates 0°C to 70°C; available from stock worldwide.
Analog to Digital Converters - ADC 11B 200 MSPS ADC
Counter ICs Hi-Sp CMOS 4-Bit Binary w/Sync Reset
16-bit Microcontrollers - MCU Mixed Signal MCU
Operational Amplifiers - Op Amps Low-Noise,High-Prec JFET-Input Op Amp
Texas Instruments SN74BCT2241DWRE4 is an octal buffer and line driver with 3-state outputs in the BCT logic family. It features 33-ohm series output resistors and a 50pF load capacitance rating for bus signal integrity. Packaged in a 20-pin SOIC with dual enable controls for unidirectional bus driving.
VQFN-48
ADS5203IPFBRG4 is a dual-channel 10-bit analog-to-digital converter by Texas Instruments with ±1 V analog input range. Key specs: 2 analog input channels, 10-bit resolution, 0.1465% max linearity error in a 48-pin TQFP package. Available in stock with worldwide shipping.
Microprocessors - MPU ARM MicroProc
Texas Instruments TRSF3238ECDWG4 is a multi-channel RS-232 line driver and receiver supporting 3 V to 5.5 V supply with 5 drivers and Schmitt-trigger inputs in a 28-pin SOIC package. It complies with EIA/TIA-232-F and V.28 standards for reliable serial communication. Available worldwide with competitive pricing and fast shipping.
Need Integrated Circuit Components?
Get competitive quotes from authorized China distributors
Request a Quote