Integrated Circuit

Texas Instruments TLC7703IDRG4, Voltage Supervisor 2.7V max. 8-Pin, SOIC

Texas Instruments TLC7733QPWG4 is a micropower voltage supervisor IC with a 2.86V fixed threshold in an 8-pin TSSOP package. Provides reliable power-on reset and brown-out detection with ultra-low quiescent current consumption. Available from stock worldwide with competitive pricing and fast shipping.

TLC7703QPWG4, Voltage Supervisor 2.56V Micropower Supply 8-Pin TSSOP

Texas Instruments TLC27M9IDG4 is a integrated circuit for embedded electronics, industrial controls, instrumentation, and production BOM sourcing. It offers 14 pins, 520 kHz, 5 V in Small Outline Packages. From quote-based sourcing, buyers can request stock checks and worldwide shipping support.

Texas Instruments TLC7703IPWRG4, Voltage Supervisor 2.7V max. 8-Pin, TSSOP

The SN74LVC827APWG4 is a 10-channel buffer and line driver with 3-state outputs from Texas Instruments in the LVC logic family. Key specs: active-low enable, 24 mA output drive, 24-pin TSSOP package. In stock with worldwide shipping.

TLC7725IPWG4 is a Texas Instruments micropower voltage supervisor and reset IC with a fixed 2.18 V threshold, single-channel monitoring function, and low quiescent current, housed in an 8-pin TSSOP package for space-constrained designs.

Texas Instruments TLC27L4B is a quad CMOS operational amplifier with 0.085 MHz bandwidth, 94 dB typical CMRR, and 0.0006 µA bias current operating from 5 V to 15 V supply in a 14-pin SOIC package. Ideal for low-power precision analog filtering. Available from stock with worldwide shipping.

TLC7524CPWG4 is an 8-bit parallel-input DAC operating at up to 10 Msps with ±10 V analog output range. It supports binary and offset binary input codes, making it versatile for waveform synthesis and calibration applications. Housed in a 16-pin TSSOP package for compact mixed-signal PCB layouts.

Texas Instruments TLC549CD, 8-bit Serial ADC, 8-Pin SOIC

Quad 3-state buffer and line driver in the 74LS logic family, providing four independent unidirectional channels with active-high enable control, 24 mA output sink current, and 45 pF load capacitance rating in a 14-pin SOIC package. Enables bus driving, signal isolation, and tri-state bus sharing in TTL-compatible digital systems. Used in legacy microprocessor bus expansion and industrial control logic boards.

The TLC27M7IDRG4 is a precision operational amplifier from Texas Instruments with a 520 kHz gain-bandwidth product and ultra-low 0.06 nA bias current. It operates on supply voltages from 5 V to 15 V with a 91 dB typical CMRR and 500 µV maximum input offset voltage. Available in an 8-pin SOIC package for low-power sensor signal conditioning and industrial analog designs.

Texas Instruments TLC27M2IPWG4 is a dual CMOS operational amplifier with 0.525 MHz gain-bandwidth product, 2 pA typical bias current, and 5 V to 15 V supply range in an 8-pin TSSOP package. From $0.80 in stock with worldwide shipping.

TLC3548CPWG4 is a 14-bit 8-channel successive approximation ADC from Texas Instruments in a 24-pin TSSOP package, with 2.785 µs maximum conversion time and 0.0061% linearity error. It features a serial SPI-compatible interface for easy microcontroller integration across 8 analog inputs up to 4.07 V. Suitable for precision industrial measurement, medical instrumentation, and multi-channel data acquisition systems.

TLC2578IPWG4 is an 8-channel 12-bit successive approximation ADC from Texas Instruments. It samples analog inputs from -10 V to 10 V with a maximum conversion time of 2.015 µs and 0.012% linearity error. Housed in a 24-pin TSSOP package for industrial data acquisition boards.

The SN74ALS564BDWG4 is an octal D-type flip-flop bus driver from Texas Instruments, featuring 3-state outputs and active-low output enable for bidirectional bus applications. It belongs to the ALS logic family, rated for 50pF load capacitance in a 20-pin SOIC package with RoHS-compliant construction. Available in stock from global distributors with fast worldwide shipping.

TLC27L1CDG4 Texas Instruments, Op Amp, 85kHz, 5 V, 9 V, 12 V, 15 V, 8-Pin SOIC

TLC2262AIPWG4 is a dual rail-to-rail operational amplifier from Texas Instruments with 800 kHz bandwidth and 1.5 mV max input offset voltage, available in an 8-pin TSSOP package.

Texas Instruments TLC2551CDGKG4 is a 12-bit successive approximation ADC with serial interface, 1-channel analog input, and 2.77 µs conversion time, housed in an 8-pin MSOP package for compact designs.

TLC2558IDWG4 is a 12-bit successive approximation ADC with 8 differential input channels and serial interface. Features 2.5 µs conversion time, 5.5 V supply, and a 20-pin SOIC package. Available from Texas Instruments with worldwide shipping.

TLC2262IDRG4 is a dual rail-to-rail CMOS operational amplifier with 0.82 MHz gain-bandwidth product and 5V to 15V supply range. It features an input bias current of only 0.8 pA and 88 dB typical CMRR, packaged in an 8-Pin SOIC for compact signal conditioning circuits.

TLC2252CPWG4 Texas Instruments, Op Amp, 200kHz, 5 V, 9 V, 12 V, 15 V, 8-Pin TSSOP

TLC1543IDBG4, 10-Bit Analogue to Digital Converter, Differential, Serial, 20-Pin SSOP

TL3843DG4-8 is a current-mode PWM switching controller from Texas Instruments operating from 12 V to 30 V input at up to 500 kHz with 200 mA output drive capability. It provides precise cycle-by-cycle current limiting in an 8-pin SOIC for flyback and forward converter power supply designs.

Texas Instruments TL2843DRG4 is a current-mode PWM controller supporting 8.2V to 30V input, up to 500 kHz switching, and 200 mA gate drive output in a 14-pin SOIC, ideal for flyback and boost power supply designs.

Texas Instruments TL2845DRG4, PWM Current Mode Controller, 200 mA, 500 kHz, 14-Pin SOIC

Texas Instruments TL2845DG4-8, PWM Current Mode Controller, 200 mA, 500 kHz, 8-Pin SOIC

Texas Instruments SN75C1167N, Line Transceiver, RS-422 2-TX 2-RX, 5 V, 16-Pin PDIP

TL16C2550IRHBG4, Universal Asynchronous Receiver & Transmitter 2-Channel 1.5MBd, 5V, 32-Pin, QFN EP

Texas Instruments SN74F125DG4 Quad-Channel Buffer & Line Driver, 3-State, 14-Pin SOIC

TL1451ACNSRG4 is a dual PWM switching controller from Texas Instruments supporting 3.6V to 50V input range with voltage-mode control in a 16-pin SOP package. Enables independent dual-output DC-DC power conversion with precise regulation. Available from stock with worldwide shipping.

The TL061ACDRG4 is a low-power JFET-input operational amplifier in SOIC-8 package. It delivers 80 dB minimum CMRR, 7500 µV max input offset voltage, and 0.007 µA max bias current. Available from stock worldwide with competitive pricing.

THS6093IPWPG4, ADSL Line Driver, Dual Current Feedback Amplifier, 14-Pin HTSSOP EP

Texas Instruments SN74LVT245BDWG4, 1 Bus Transceiver, Bus Transceiver, 8-Bit Non-Inverting LVTTL, 20-Pin SOIC

TIBPAL16L8-7CN is a bipolar PAL-type programmable logic device with 16 inputs, 8 outputs, and 64 product terms in 20-pin PDIP package. Offers 7 ns propagation delay, 10 dedicated inputs, and 6 bidirectional I/O lines. From $3.50 in stock worldwide shipping.

Texas Instruments THS7315 is a 3-channel video amplifier with 10.6 MHz bandwidth per channel in an 8-pin SOIC package. Designed for RGB and component video signal buffering and distribution. Available from stock with worldwide shipping.

Texas Instruments THS12082IDAG4 is a dual-channel, 12-bit parallel ADC with differential and single-ended inputs in a 32-pin TSSOP package. It accepts analog input voltages from 1.4 V to 4.05 V with 0.037% maximum linearity error for high-accuracy data acquisition. Available from stock worldwide for precision measurement applications.

Texas Instruments SN74AHC574DWG4 Octal D Type Flip Flop IC, 3-State, 20-Pin SOIC

THS4011IDGNG4 is a high-speed voltage-feedback operational amplifier from Texas Instruments offering 270 MHz bandwidth and ±15 V supply range in an 8-Pin MSOP package. Key specs include 77 dB minimum CMRR and 8 µA max bias current. Available worldwide with fast shipping.

The SN75LBC174DWG4 is a quad EIA-485/RS-485 differential line transmitter operating from a 5 V supply in a 20-pin SOIC package. It drives 4 independent differential output pairs with 100 µA maximum input current, suited for multi-drop industrial networks transmitting data over long cable runs.

The THS1030CPWG4 is a 10-bit, single-channel analog-to-digital converter from Texas Instruments with differential inputs and parallel output interface in a 28-pin TSSOP package. It accepts analog inputs up to 5.5 V and achieves 0.1953% maximum linearity error for data acquisition applications. Available RoHS-compliant from global authorized distributors.

TFP101APZPG4, Video Decoder 3.3V 100-Pin HTQFP

Texas Instruments TAS5112ADFDG4 is a stereo Class-AB audio amplifier delivering 62 W nominal output power per channel with 20 kHz bandwidth and 16 V to 30.5 V supply range. Housed in a 56-pin HTSSOP package for high-density audio designs.

Texas Instruments SN75LP1185DWG4 is a multichannel RS-232 line transceiver with 3 transmitters, 5 receivers, and 3 transceivers in a 20-pin SOIC package. It complies with EIA/TIA-232-F and V.28 standards and features Schmitt-trigger inputs for enhanced noise immunity. Available from stock with worldwide shipping.

Texas Instruments DS92LV1021AMSA/NOPB, LVDS Serializer LVCMOS, LVTTL 400Mbps, 28-Pin, SSOP

Texas Instruments SN74LVTH241DWG4 is an 8-bit non-inverting 3-state bus buffer and line driver operating from 2.7 V to 3.6 V in a 20-pin SOIC package. Features dual active-low and active-high output enable controls with 50 pF load capacitance. Available from stock worldwide.

GREEN, PLASTIC, MS012AB, SOIC-14

Texas Instruments SN75161BNE4, Line Transceiver, 20-Pin PDIP

SN75107ADG4 is a dual differential line receiver from Texas Instruments in a 14-pin SOIC package. It features 2 independent differential input channels with a common strobe input, 16 mA output sink current, and is designed for general-purpose RS-422 and balanced-line data reception. Available from stock with worldwide shipping.

The SN75108ADG4 is a dual differential line receiver IC from Texas Instruments with a common strobe input for general-purpose interface applications. It features totem-pole outputs, 16mA output low current, and two independent differential receiver functions. Housed in a 14-pin SOIC with RoHS e4 compliance, available in stock with worldwide shipping.