Integrated Circuit

The UCC2580D-4G4 is a dual PWM voltage-mode controller from Texas Instruments operating up to 430 kHz with 1 A gate drive capability in a 16-pin SOIC package. It supports 10–14 V input voltage range and integrates dual outputs for flexible power supply design. Available from stock worldwide with competitive pricing for telecom and industrial power systems.

Texas Instruments UCC2580N-3, Dual PWM Voltage Mode Controller, 1 A, 430 kHz 16-Pin, PDIP

PWM secondary-side post-regulator controller with current-mode control, 8.9V to 14V input voltage range, and 14-pin PDIP package for offline switching power supplies. Enables precise secondary-side regulation in forward and flyback converter designs without optocoupler feedback. Available through authorized distributors with worldwide shipping.

The UCC25705DG4 is a voltage-mode PWM controller IC from Texas Instruments, featuring up to 4000kHz switching frequency, 20mA drive capability, and an input voltage range of 9V to 15V. Housed in an 8-pin SOIC surface-mount package, it enables precise pulse-width modulation control for compact switching power supply designs. Available from authorized distributors with worldwide shipping.

Texas Instruments UCC2580N-4G4, Dual PWM Voltage Mode Controller, 1 A, 430 kHz 16-Pin, PDIP

Texas Instruments TLC7701QDG4 is a single-channel voltage supervisor and reset IC with adjustable threshold up to 1.16 V. It provides accurate supply monitoring with reset signal generation and features SOIC-8 packaging. Competitively priced and available in stock with worldwide shipping.

Texas Instruments UCC2580N-2, Dual PWM Voltage Mode Controller, 1 A, 430 kHz 16-Pin, PDIP

Texas Instruments TPS61010DGSG4, Boost Converter, Step Up Adjustable, 780 kHz 10-Pin, MSOP

The TPS2057ADG4 is a hex power distribution switch from Texas Instruments, featuring three high-side channels with 80mΩ on-resistance and 2.7V minimum operating voltage. It integrates fault reporting and current limiting in a 16-pin SOIC package. Available from stock with competitive pricing and worldwide shipping.

Texas Instruments TPS2398DGKG4, 1-Channel, Hot Swap Controller, Negative Voltage, -48 V 8-Pin, MSOP

Texas Instruments UCC2580D-2G4 is a dual voltage-mode PWM controller operating up to 430kHz with 1A gate drive output in a 16-pin SOIC package. Supports 10V to 14V input range for push-pull and half-bridge topologies. RoHS compliant, in stock worldwide shipping.

The TLC354CPWG4 is a quad comparator from Texas Instruments with open-drain outputs and 0.65 µs response time supporting 3 V to 15 V supply range in a 14-pin TSSOP package. It features ultra-low 0.6 nA input bias current and four independent comparator channels. Available from stock with competitive pricing and worldwide shipping.

UC39431DG4 is an adjustable three-terminal series voltage reference by Texas Instruments covering 2.4V to 36V output range with 0.4% accuracy. Key specs: 50 mA max output current, programmable to standard voltages, 8-pin SOIC package. Available from stock with worldwide shipping.

Texas Instruments UC3841DWG4 is a PWM current-mode controller delivering up to 1 A output with switching frequency up to 500 kHz. Operating from 8 V to 30 V input, it supports pulse width modulation and current-mode control for efficient power supply designs. Available in 18-Pin SOIC package from Texas Instruments, in stock with worldwide shipping.

The UC39432NG4 is a precision analog controller and feedback signal generator from Texas Instruments. It features a 1.3V internal reference, supports up to 36V supply voltage, and operates as a single-channel precision analog circuit. Available in 8-pin PDIP package, from $2.50 in stock with worldwide shipping.

Texas Instruments TLC2652C-8DG4 is a chopper-stabilized precision operational amplifier with an ultra-low input offset voltage of 4.35µV maximum and 1.9MHz bandwidth. It features 120dB minimum CMRR, 0.0001µA bias current, and supports supply voltages from 5V to 15V in an 8-pin SOIC package. Available from stock with worldwide shipping.

The UC3872MG4 is a fluorescent lamp controller and driver IC from Texas Instruments, featuring current-mode resonant control with input voltage range of 4.5V to 24V across 5V, 9V, 12V, 15V, and 18V nominal levels. It supports efficient CCFL and fluorescent lamp dimming in a compact 16-pin QSOP package. Available in RoHS-compliant lead-free packaging, in stock worldwide with fast global shipping.

Texas Instruments UCC25702PWG4, PWM Voltage Mode Controller, 1 A, 700 kHz 14-Pin, TSSOP

The UC3832NG4 is a low dropout voltage regulator from Texas Instruments with adjustable output up to 0.4A, supporting input voltages from 4.5V to 36V with a 2V reference. Packaged in a 14-Pin PDIP, it features under and over-voltage fault alert with programmable delay. Available from stock worldwide with competitive pricing.

The TPS76425DBVRG4 is a fixed 2.5V LDO voltage regulator from Texas Instruments delivering 150mA output in a compact 5-pin SOT-23 package. Accepts 2.7V to 10V input with dropout voltage as low as 0.36V nominal. Available from stock with worldwide shipping.

UC2874N-1G4, DC-DC Controller Dual, 36V Step-Down, 18-Pin, PDIP

The Texas Instruments UC37133DG4 is a 1-channel intelligent power switch in an 8-pin SOIC package. It features built-in overcurrent and transient protection with up to 0.4A source output current. Available from stock worldwide with competitive pricing.

The UC3578NG4 is a voltage-mode PWM DC-DC switching controller from Texas Instruments, supporting an input voltage range of 11V to 72V in a 16-pin PDIP package. It provides pulse-width modulation control for designing reliable buck, boost, and flyback converters in power supply applications. In-stock worldwide with competitive pricing for engineering evaluation and volume production.

The UC2872NG4 is a fluorescent lamp controller and driver IC from Texas Instruments using current-mode PWM control. It operates over an input voltage range of 4.5 V to 24 V and supports resonant control techniques in a 14-pin PDIP package. Available from stock worldwide with fast shipping.

The UC2871NG4 is a current-mode resonant fluorescent lamp controller and driver IC from Texas Instruments with a 4.5 V to 20 V input range and multi-voltage support at 5 V, 9 V, 12 V, 15 V, and 18 V. It integrates resonant control for efficient lamp regulation in compact CCFL ballast designs. Available in an 18-pin PDIP package, RoHS-compliant and lead-free.

The UC2866NG4 is a voltage-mode resonant PWM controller from Texas Instruments supporting dual full and half-bridge topologies with 500mA drive and 550kHz operation. It accepts 11.5V to 20V input and is housed in a 16-pin PDIP package. Available from stock with worldwide shipping.

The UC2848DWG4 is a current-mode PWM switching controller from Texas Instruments with up to 1000 kHz switching frequency and 2 A gate drive capability. It operates from an 11 V to 20 V input supply and is housed in a 16-pin SOIC package for compact power supply designs. Available with worldwide shipping.

UC2861Q, PWM Voltage Mode Controller, Dual Full/Half-Bridge, Resonant, 500mA 550kHz, 20-Pin PLCC

Texas Instruments UC2854ANG4, Power Factor Pre-Regulator Circuit, 115 kHz, 20 V 16-Pin, PDIP

TPS3610T50PWG4, Processor Supervisor 1.8, 5V Active Low, Reset 14-Pin TSSOP

UC2714NG4, Dual MOSFET Power Driver 2A, 7 to 20V, 8-Pin PDIP

The UC2527ANG4 is a Dual PWM Voltage-Mode Controller IC from Texas Instruments, offering up to 400mA output drive, 400kHz switching frequency, and 8V to 35V input range in a 16-pin PDIP package for versatile power supply design. From $2.50 in stock with worldwide shipping.

The UC2709NG4 is a dual MOSFET power gate driver capable of sourcing and sinking up to 1.5 A peak output current per channel for fast switching. It supports a wide 5 V to 40 V supply range with totem-pole outputs and inverting logic. Available in an 8-pin PDIP package, ideal for high-frequency power conversion designs.

The TVP7001 is a 10-bit serial ADC from Texas Instruments with differential input capability in a 100-pin HTQFP package. It delivers high-speed analog-to-digital conversion with differential input pairs for excellent noise rejection. Ideal for video and imaging data acquisition systems requiring precision 10-bit resolution at fast sample rates.

LCC-20

Texas Instruments TSB41BA3BPFPG4, Cable Transceiver, 6-TRX 400MBps Differential, 80-Pin HTQFP

The TPS79516DCQG4 is a fixed 1.6 V, 500 mA low-dropout linear voltage regulator from Texas Instruments with a 2.7 V to 5.5 V input range and ±2% accuracy in a 6-pin SOT-223 package. It features ultra-low dropout voltage of 1 V maximum, ensuring stable regulation even with small input-output voltage differentials. Available from stock worldwide at competitive prices for portable and battery-powered applications.

The TS12A4515DG4 is a single-channel SPST analog switch from Texas Instruments designed for 3V, 5V, 9V, and 12V systems. It features a normally-closed (NC) configuration with typical on-resistance under 0.5 Ohm and operates with input voltages from -4.5V to +5.5V. Packaged in an 8-pin SOIC for signal routing in audio, industrial, and instrumentation applications.

Texas Instruments TPS77925DGKG4, LDO Voltage Regulator, 250mA, 2.5 V, ±2% 8-Pin, MSOP

TPS77718DG4 is a fixed 1.8 V low-dropout linear voltage regulator from Texas Instruments, delivering 750 mA output current with a 427 mV maximum dropout voltage and ±2% output accuracy. It accepts an input voltage from 2.7 V to 10 V and provides excellent line regulation of 0.001314% for sensitive analog and digital loads. Packaged in an 8-pin SOIC, it is used in portable electronics, DSP cores, and microcontroller power rails.

TPS77825DG4, Low Dropout Voltage Regulator, 0.75A, 2.5V ±2%, 2.7 to 10Vin, 0.904W, 8-Pin SOIC

TPS79228DBVTG4, Low Dropout Voltage Regulator, 0.1A, 2.8V ±2%, 2.7 to 5.5Vin, 0.561W, 5-Pin SOT-23

Texas Instruments TPS77515PWPG4 is a fixed 1.5 V, 500 mA low-dropout linear voltage regulator with 285 mV typical dropout voltage, accepting 2.7 V to 10 V input. It offers ±2% output accuracy, thermal shutdown, and current limiting in a 20-pin HTSSOP with exposed pad for efficient thermal dissipation.

TPS77628PWPG4 is a fixed 2.8 V low-dropout linear voltage regulator capable of delivering 500 mA output current with a maximum dropout voltage of 410 mV and input range of 2.7 V to 10 V. Housed in a 20-pin HTSSOP package, it provides ±2% output accuracy for powering RF modules, DSPs, and portable electronics requiring a stable 2.8 V rail.

Texas Instruments TPS77615PWPG4 is a fixed 1.5V LDO voltage regulator delivering up to 500mA output current with a low dropout voltage of 1V. It features tight ±2% output accuracy, 2.7V to 10V input range, and comes in a compact 20-Pin HTSSOP package. Available from stock worldwide with fast shipping.

The TPS77315DGKG4 is a fixed 1.5V low dropout linear voltage regulator from Texas Instruments, delivering 250mA output current with a maximum dropout of 1.2V from a 2.7V–10V input in an 8-pin MSOP/VSSOP package. It provides excellent line and load regulation for noise-sensitive applications. Available from stock with worldwide shipping.

TPS77625PWPG4 is a 500 mA fixed-output 2.5 V low-dropout linear regulator from Texas Instruments with a 0.2 V nominal dropout voltage, ±2% output accuracy, and an input range of 2.7 V to 10 V. The 20-pin HTSSOP package suits DSP, FPGA, and communication board power rails.

The TPS77525PWPG4 is a fixed 2.5V, 500mA low-dropout linear voltage regulator from Texas Instruments with a 0.2V typical dropout, accepting inputs from 2.7V to 10V with excellent line regulation of 0.00183% maximum in a 20-pin HTSSOP exposed-pad package. Offers precision ±2% output accuracy and very low quiescent current. Available from stock worldwide at competitive pricing.

Texas Instruments TPS76725QDG4, LDO Voltage Regulator, 1A, 2.5 V, ±2% 8-Pin, SOIC

Texas Instruments TPS77128DGKG4 is a fixed-output 2.8V LDO linear voltage regulator delivering 150mA output current with a tight 2% accuracy and only 265mV minimum dropout voltage. It accepts input voltages from 3.121V up to 10V for versatile power rail applications. Available in an 8-pin MSOP package with worldwide shipping.