Integrated Circuit
Integrated Circuit components are essential building blocks in modern electronic systems. FindMyChip sources Integrated Circuit ICs from authorized China distributors with competitive pricing and reliable stock.
77,666 components
How to Choose Integrated Circuit Components
- 1Verify electrical specifications (voltage, current, frequency) match your design requirements.
- 2Check package footprint and thermal characteristics against your PCB layout constraints.
- 3Confirm lifecycle status and long-term availability for production designs.
Popular Applications
Consumer Electronics
Smartphones, tablets, and smart home devices
Industrial Systems
Factory automation, control systems, and monitoring
Automotive
In-vehicle electronics and advanced driver assistance
Telecommunications
Base stations, routers, and network equipment
Integrated Circuit Guides & Articles
STM32H725IGT3 High-Performance MCU Design Guide
Design STM32H725IGT3 systems for reliable 550 MHz operation with practical power, clock, cache, DMA, PCB, ADC, and recovery guidance.
Jul 31, 2026
150141VS73100 Violet SMD LED Selection Guide: Color, Drive, and Sourcing
Select the 150141VS73100 by wavelength, brightness, drive current, 3528 fit, reliability, and traceable sourcing requirements.
Jul 31, 2026
STEF05SGR 5 V eFuse Protection Design Guide
Design a reliable 5 V STEF05SGR eFuse stage with current-limit math, capacitor sizing, thermal analysis, fault recovery, and PCB layout guidance.
Jul 30, 2026
S1J-E3/61T Rectifier Thermal Design, Surge, and Derating Guide
Practical S1J-E3/61T design guidance for thermal limits, inrush surge, PCB layout, voltage margin, and current derating.
Jul 30, 2026
All Integrated Circuit Components
Showing 47,451–47,500 of 77,666
35V, 2.5A BIPOLAR STEPPER MOTOR
Isolation Amplifiers +/-1-V input, precision reinforced isolated amplifier with integrated DC/DC converter and high CMTI 16-SOIC -40 to 125
TPS25750SRSMR
Texas Instruments TPS650242RHBTG4, Battery Charge Controller 32-Pin, QFN
Use the download button to access the DRV5057Z3QDBZR schematic symbol, PCB footprint, and 3D model.
3-V TO 65-V, AUTOMOTIVE IDEAL DI
Use the download button to access the SNJ54LS365AJ schematic symbol, PCB footprint, and 3D model.
Texas Instruments TPS71256DRCTG4, Dual LDO Voltage Regulator, 250mA, 2.8 V, ±1.5% 10-Pin, SON
USB, Type-C Controller PMIC 38-WQFN (4x6)
LDO Voltage Regulators 500 MA LDO REG
Board Mount Hall Effect/Magnetic Sensors Linear hall effect sensor with digital PWM output 3-SOT-23 -40 to 125
35V, 2.5A BIPOLAR STEPPER OR DUA
CAN Interface IC Automotive fault-protected high-speed CAN transceiver with standby and 1.8-V I/O support
AEC-Q100, -4-V to 110-V, 1.3-MHz current sense amplifier
Board Mount Hall Effect/Magnetic Sensors Linear hall effect sensor with digital PWM output 3-SOT-23 -40 to 125
TEXAS INSTRUMENTS - TL431CDBZR . - Voltage Reference, Precision, Shunt - Adjustable, TL431 Series, 2.495V to 36V, SOT-23-3
Precision Amplifiers Precision Chopper-Stabilized
MCU 32-bit ARM Cortex M4F 1MB Flash Automotive 212-Pin NFBGA T/R
Gate Drivers 5-A/5-A, 3-k/5-kVRMS automotive single-channel isolated gate driver with Miller clamp 8-SOIC -40 to 125
Audio Amplifiers High-fidelity, high-voltage (36-V), low-noise (3.7-nV/rtHz) Burr-Brown audio fully-differential amp 8-VSSOP -40 to 125
4-Channel Single ADC Pipelined 6Msps 12-bit Parallel 32-Pin TSSOP T/R
Switching Voltage Regulators 2.2V-4.0V 14A Otp Buck PWM Switch
MCU 32-bit ARM Cortex M4F 512KB Flash 3.3V Automotive 128-Pin TQFP Tray
TPS3837L30DBVTG4, Processor Supervisor 1.6 to 6V Active High, Push-Pull, Reset 5-Pin SOT-23
UCC39422PWG4 is a configurable peak current-mode PWM controller supporting voltage-mode control with programmable PFM technique, operating from 1.8 V to 8 V input. It features a 20-pin TSSOP package, internal soft-start, and programmable oscillator frequency up to several hundred kHz for compact DC-DC converter designs. Available from stock worldwide with fast international shipping.
LDO Voltage Regulators 300-mA low-voltage low-dropout (LDO) linear regulator
Texas Instruments UCC28085DG4, PWM Current Mode Controller, Dual-Channel 1 A, 1, 8-Pin SOIC
Logic Gates Automotive Schmitt-trigger inputs quadruple 2-input Exclusive-NOR gates with open-drain outputs 14-SOIC -40 to 125
Audio Amplifiers 4.5-V to 26.4-V, 7.5-A stereo, 15-A mono, digital input, Piezo driver with smart I/V protection 32-VQFN -25 to 85
The VCA820IDG4 is a wideband voltage-controlled amplifier (VCA) from Texas Instruments in a 14-pin SOIC package, offering 65 dB CMRR, 17 mV maximum input offset voltage, and dual ±5 V supply operation. It delivers linear gain control over a wide dynamic range, making it ideal for ultrasound front-ends, automatic gain control loops, and communications signal conditioning.
TPS56302PWPG4 is a dual-channel voltage-mode buck controller supporting 4.5 V to 5.5 V input, driving two independent step-down converters with adjustable output voltages. Key specs include voltage-mode control, 28-pin HTSSOP-EP package, and support for synchronous rectification with programmable soft-start. Available from stock with worldwide shipping.
Current Sense Amplifiers 26V, dual channel, bi-directional, 350kHz current sense amplifier
Use the download button to access the SN74HCS174QPWRQ1 schematic symbol, PCB footprint, and 3D model.
Use the download button to access the AWR6843ABGABLQ1 schematic symbol, PCB footprint, and 3D model.
INDUSTRYS LOWEST OFFSET DRIFT (1
Buffers & Line Drivers 16B Buffers/Drivers
32-bit Microcontrollers - MCU C2000 32-bit MCU with 100 MHz, 128 KB Flash, 12 PWM
UCC3972PW, Fluorescent Lamp Controller Driver, 5 V, 9 V, 12 V, 15 V, 18 V, 24 V, 8-Pin TSSOP
The UCC3921DG4 is a single-channel negative voltage hot swap controller by Texas Instruments in an 8-pin SOIC package. Key specs: adjustable threshold, negative voltage operation, and single-channel control. Available from stock with worldwide shipping.
Texas Instruments UCC3808AD-1G4, PWM Current Mode Controller, Dual-Channel 1 A, 1, 8-Pin SOIC
Texas Instruments TPS61080 is a fixed 1.2 MHz boost converter delivering up to 400 mA from a 2.7 V to 5.5 V input with adjustable output voltage up to 14 V. It features a 0.3 Ω integrated switch and Burst Mode operation for high efficiency at light loads. Available from stock with worldwide shipping.
Bus Switch 4-Element CMOS 16-IN 48-Pin SSOP Tube
VSP1900 is a Texas Instruments integrated circuit for industrial electronics. It offers 2 pins, supporting reliable assembly in compact electronic equipment. From quote-based pricing, request stock for worldwide shipping.
VCA822IDGSTG4 is a Texas Instruments integrated circuit for industrial electronics. It offers 2 pins, supporting reliable assembly in compact electronic equipment. From quote-based pricing, request stock for worldwide shipping.
UCC3974PWG4 is a 16 pins integrated circuit by Texas Instruments. Key specs: 16 pins, Small Outline Packages package, UCC3974PWG4, Fluorescent Lamp Controller Driver, 5, 9, 12, 15, 18V, 16-Pin TSSOP. From quote-based sourcing, in stock checks support worldwide shipping.
The UCC39411PWG4 is a current-mode step-up boost converter IC from Texas Instruments in an 8-pin TSSOP package. It operates from 1.1V to 3.2V input, switching at 500 kHz with adjustable output voltage and 60 mA output capability. Available from authorized distributors with worldwide shipping.
Texas Instruments TPS2813DG4 is a dual MOSFET gate driver IC capable of delivering 2A peak output current per channel. It features Schmitt trigger inputs with NAND gate logic, operates from an 8V to 40V supply rail, and comes in an 8-pin SOIC package. Ideal for driving N-channel power MOSFETs in motor control and DC-DC converter applications.
UCC3973PWG4 is a fluorescent lamp driver IC from Texas Instruments in an 8-pin TSSOP package, supporting multiple supply voltages from 5 V to 24 V for CCFL backlighting and general fluorescent lamp control in display and lighting applications.
UCC39412PWG4 is a current-mode boost converter in an 8-pin TSSOP package, accepting input voltages from 1.1 V to 3.2 V and delivering a regulated 3.3 V output at up to 60 mA with a 500 kHz switching frequency. It targets low-voltage battery-powered applications requiring a compact step-up solution. Ideal for single-cell Li-ion, alkaline, or coin-cell powered portable devices needing 3.3 V rail generation.
The UCC39422NG4 is a voltage-mode PWM controller with configurable peak current mode and programmable PFM technique, supporting input voltages from 1.8V to 8V. It features a 20-pin PDIP package and is designed for low-voltage DC-DC converter applications. Available from distributors worldwide with worldwide shipping.
Need Integrated Circuit Components?
Get competitive quotes from authorized China distributors
Request a Quote