Integrated Circuit
Integrated Circuit components are essential building blocks in modern electronic systems. FindMyChip sources Integrated Circuit ICs from authorized China distributors with competitive pricing and reliable stock.
77,666 components
How to Choose Integrated Circuit Components
- 1Verify electrical specifications (voltage, current, frequency) match your design requirements.
- 2Check package footprint and thermal characteristics against your PCB layout constraints.
- 3Confirm lifecycle status and long-term availability for production designs.
Popular Applications
Consumer Electronics
Smartphones, tablets, and smart home devices
Industrial Systems
Factory automation, control systems, and monitoring
Automotive
In-vehicle electronics and advanced driver assistance
Telecommunications
Base stations, routers, and network equipment
Integrated Circuit Guides & Articles
STM32H725IGT3 High-Performance MCU Design Guide
Design STM32H725IGT3 systems for reliable 550 MHz operation with practical power, clock, cache, DMA, PCB, ADC, and recovery guidance.
Jul 31, 2026
150141VS73100 Violet SMD LED Selection Guide: Color, Drive, and Sourcing
Select the 150141VS73100 by wavelength, brightness, drive current, 3528 fit, reliability, and traceable sourcing requirements.
Jul 31, 2026
STEF05SGR 5 V eFuse Protection Design Guide
Design a reliable 5 V STEF05SGR eFuse stage with current-limit math, capacitor sizing, thermal analysis, fault recovery, and PCB layout guidance.
Jul 30, 2026
S1J-E3/61T Rectifier Thermal Design, Surge, and Derating Guide
Practical S1J-E3/61T design guidance for thermal limits, inrush surge, PCB layout, voltage margin, and current derating.
Jul 30, 2026
All Integrated Circuit Components
Showing 46,751–46,800 of 77,666
The SN74LS378D is a hex D-type flip-flop with clock enable and hold mode from Texas Instruments, offering 6 latches operating at up to 30MHz in a 16-pin SOIC package. It features LS-family TTL logic with 8mA output sink current and 15pF load capacitance for robust data storage. Available in stock worldwide with competitive pricing.
16-bit Microcontrollers - MCU 20 MHz MCU with 256KB Flash, 18KB SRAM, 12-bit ADC, 12-bit DAC, Comparator, DMA, UART/SPI/I2C 113-NFBGA -40 to 85
UC1846J883B is a current-mode PWM controller operating from 8 V to 40 V with up to 500 kHz switching frequency and 500 mA output drive. It uses a 16-pin ceramic DIP package rated for military-grade applications. Available from Texas Instruments with worldwide distribution.
The UC1854J883B is a Power Factor Correction Preregulator IC operating at 118kHz with 15V to 30V input voltage range in a 16-Pin CDIP package. It features current-mode control with pulse width modulation for high-efficiency AC-DC power conversion. Available from authorized distributors worldwide with competitive pricing and reliable stock.
Counter Single 7-Bit Binary UP 14-Pin CDIP Tube
Use the download button to access the TMUX7212PWR schematic symbol, PCB footprint, and 3D model.
SN74LS124N1 is a dual voltage-controlled oscillator IC with a nominal operating frequency of 12 MHz, supply voltage range of 4.5 V to 5.5 V, and control voltage up to 5 V. Housed in a 16-pin DIP through-hole package, it is used in clock generation and frequency synthesis circuits.
Analog to Digital Converters - ADC 24-bit, 32-kSPS, 3-channel, simultaneous-sampling, delta-sigma ADC 20-WQFN -40 to 125
Battery Management Voltage and temperature protection for 3-s to 16-s cell Li-ion batteries with internal delay timer 24-TSSOP -40 to 85
The LM3880QMF-1AC/NOPB is a 3-channel automotive-grade processor supervisor IC from Texas Instruments with open-drain outputs. It monitors multiple power rails with a compact 6-pin SOT-23 package and meets AEC-Q100 automotive standards. Available lead-free in stock with worldwide shipping.
16-bit Microcontrollers - MCU 25 MHz MCU with 128KB Flash, 10KB SRAM, 12-bit ADC, Comparator, DMA, UART/SPI/I2C, HW Multiplier 80-NFBGA -40 to 85
DRV8323 is a 65 V 3-phase smart gate driver with integrated current shunt amplifiers by Texas Instruments in a QFN package. Key specs: 65 V maximum bus voltage, configurable 1 A to 2.5 A gate drive current, 3 integrated current sense amplifiers with programmable gain. From $3.50, in stock with worldwide shipping.
Use the download button to access the INA238AIDGSR schematic symbol, PCB footprint, and 3D model.
Use the download button to access the ADS131M08IRSNT schematic symbol, PCB footprint, and 3D model.
Operational Amplifiers - Op Amps High precision (40- V, 0.1 V/C), high-voltage (36-V), low-noise (3.7-nV/ Hz), fully-differential amp 8-SOIC -40 to 125
Texas Instruments TMS470MF06607BPZQ is a 32-bit RISC Flash microcontroller running at up to 20 MHz with 49 I/O lines, integrated ADC, and 3 V to 3.6 V operation in a 100-pin PQFP package. Designed for automotive and industrial control applications requiring high reliability. From $18.50 in stock worldwide shipping.
Switching Voltage Regulators 3.5-60Vin,0.5A Step- Down Converter
16-bit Microcontrollers - MCU 25 MHz MCU with 256KB FLASH, 16KB SRAM, 12-bit ADC, Commercially Liscensed Bluetooth v2.1 Statck 113-NFBGA -40 to 85
Analog to Digital Converters - ADC 24-bit, 32-kSPS, 6-channel, simultaneous-sampling, delta-sigma ADC 32-QFN -40 to 125
High Speed Operational Amplifiers Lo-Distortion Hi-Spd R-to-R Otpt Oper Amp
MCU 16-bit MSP430 RISC 16KB Flash 2.5V/3.3V 48-Pin SSOP T/R
LIN Transceivers Automotive local interconnect network (LIN) transceiver for K-line applications 8-SOIC -40 to 125
Precision Amplifiers Micro-power, high-precision, wide bandwidth RRIO op amp with e-Trim
J-K FLIP-FLOP, HC/UH SERIES, 2-F
Precision Amplifiers Micro-power, high-precision, wide bandwidth RRIO op amp with e-Trim 5-SC70 -40 to 125
Logic Gates 3-channel, 3-input OR gates with schmitt-trigger inputs
Power Management Modules -55 C junction, 60-V input, 1-V to 16-V output, 1.5-A power module in enhanced HotRod QFN package 15-B3QFN -55 to 125
Precision Amplifiers Low noise (0.2-uVPP, 9-nV/
Use the download button to access the TPS2116DRLR schematic symbol, PCB footprint, and 3D model.
60-V input, 1-V to 16-V output, 1.5-A power module in enhanced HotRod™ QFN package
Power Management Modules 60-V input, 1-V to 16-V output, 1.5-A power module in enhanced HotRod QFN package 15-B3QFN -40 to 125
The DRV8833CRTE is a dual H-bridge brushed DC motor driver supporting 2.7-V to 10.8-V supply voltage in a compact 16-pin QFN package with an exposed heat-sink pad. It drives two DC motors or one stepper motor with up to 1.5-A peak current per bridge. Available in stock worldwide for robotics and automation applications.
4-channel, simultaneously-sampling, 24-bit, delta-sigma ADC
Use the download button to access the INA239AIDGSR schematic symbol, PCB footprint, and 3D model.
Texas Instruments OPA340MDREP is an enhanced-product single-supply voltage-feedback op amp with 1600 µV maximum input offset voltage, 64 dB minimum CMRR, and 0.5 nA maximum input bias current. Housed in a 5-pin SOT-23 package for compact layouts. Available in stock with worldwide shipping.
Use the download button to access the TLV9304IPWR schematic symbol, PCB footprint, and 3D model.
Board Mount Hall Effect/Magnetic Sensors Ratiometric linear hall effect sensor with analog output 3-SOT-23 -40 to 125
Board Mount Hall Effect/Magnetic Sensors Ratiometric linear hall effect sensor with analog output 3-SOT-23 -40 to 125
Use the download button to access the INA239AIDGST schematic symbol, PCB footprint, and 3D model.
The DAC53701DSGR is a 10-bit serial-input digital-to-analog converter from Texas Instruments supporting up to 5.5V analog output in an 8-pin WSON no-lead package. It uses a binary-coded serial interface and delivers 0.097656% max linearity error for precise voltage generation in compact embedded designs. Available from stock worldwide with competitive pricing.
Encoders, Decoders, Multiplexers & Demultiplexers Automotive 3-line to 8-line decoders/demultiplexer 16-SOIC -40 to 125
Processor Supervisor 1.71V 1 Active High/Push-Pull 5-Pin SOT-23 T/R
IC OPAMP GP 4 CIRCUIT 14TSSOP
ARM Microcontrollers - MCU C2000 32-bit MCU with connectivity manager, 2x C28x+CLA CPU, 1.5-MB flash, FPU64, Ethernet 176-HLQFP -40 to 125
Texas Instruments LMG3522R030-Q1 is an automotive-qualified 650 V, 30 mΩ GaN FET integrating a driver, protection circuits, and temperature reporting in a single package. It enables high-frequency power conversion designs with simplified gate-drive requirements and AEC-Q101 compliance.
Texas Instruments TMS470R1A384PZ-T is a 32-bit ARM7TDMI RISC microcontroller with 384 KB Flash, 20 MHz max clock, and 1.8 V core plus 3.3 V I/O supply. Packaged in a 100-pin LQFP with ADC and boundary scan for automotive and industrial control applications.
Use the download button to access the SN74HCS251DR schematic symbol, PCB footprint, and 3D model.
LM3146M is a complex NPN transistor array in a 14-pin SOIC package, rated for 30 V collector-emitter and 50 mA collector current. Designed for very high frequency band operation with low-noise characteristics. From $0.85 in stock with worldwide shipping.
Analog Comparators Quad Micropower LinCMOS Comparator
Operational Amplifiers - Op Amps Ultra-high precision, zero-drift, low-input-bias-current op amp 8-VSSOP -40 to 125
Need Integrated Circuit Components?
Get competitive quotes from authorized China distributors
Request a Quote