Integrated Circuit
Integrated Circuit components are essential building blocks in modern electronic systems. FindMyChip sources Integrated Circuit ICs from authorized China distributors with competitive pricing and reliable stock.
77,666 components
How to Choose Integrated Circuit Components
- 1Verify electrical specifications (voltage, current, frequency) match your design requirements.
- 2Check package footprint and thermal characteristics against your PCB layout constraints.
- 3Confirm lifecycle status and long-term availability for production designs.
Popular Applications
Consumer Electronics
Smartphones, tablets, and smart home devices
Industrial Systems
Factory automation, control systems, and monitoring
Automotive
In-vehicle electronics and advanced driver assistance
Telecommunications
Base stations, routers, and network equipment
Integrated Circuit Guides & Articles
STM32H725IGT3 High-Performance MCU Design Guide
Design STM32H725IGT3 systems for reliable 550 MHz operation with practical power, clock, cache, DMA, PCB, ADC, and recovery guidance.
Jul 31, 2026
150141VS73100 Violet SMD LED Selection Guide: Color, Drive, and Sourcing
Select the 150141VS73100 by wavelength, brightness, drive current, 3528 fit, reliability, and traceable sourcing requirements.
Jul 31, 2026
STEF05SGR 5 V eFuse Protection Design Guide
Design a reliable 5 V STEF05SGR eFuse stage with current-limit math, capacitor sizing, thermal analysis, fault recovery, and PCB layout guidance.
Jul 30, 2026
S1J-E3/61T Rectifier Thermal Design, Surge, and Derating Guide
Practical S1J-E3/61T design guidance for thermal limits, inrush surge, PCB layout, voltage margin, and current derating.
Jul 30, 2026
All Integrated Circuit Components
Showing 46,651–46,700 of 77,666
LDO Voltage Regulators Automotive 500-mA, low-IQ, high-PSRR, low-dropout (LDO) voltage regulator with power good</p 8-SON -40 to 125
LDO Voltage Regulators Automotive 1-A, low-IQ, high-PSRR, low-dropout (LDO) voltage regulator with power good 8-SON -40 to 125
Use the download button to access the TPS74530PQWDRBRQ1 schematic symbol, PCB footprint, and 3D model.
Opa2206 40 V, Input Over Voltage Protected, 25 V, 0.3 V Degree C, Low Power
LDO Voltage Regulators Automotive 500-mA, low-IQ, high-PSRR, low-dropout (LDO) voltage regulator with power good</p 8-SON -40 to 125
Analog Comparators Automotive small-size comparator with integrated reference 5-SC70 -40 to 125
Operational Amplifiers - Op Amps Low Cost FET-Input Oper Amplifier
TMCS1101A3UQDR is a precision isolated current sensor from Texas Instruments with an internal voltage reference in an 8-SOIC package. It provides high-accuracy analog voltage output for current measurement across a wide -40°C to 125°C temperature range. Available in surface-mount form factor with RoHS-compliant construction for industrial and automotive applications.
The V62/13623-02XE (SN65LBC173A-EP) is a quadruple RS-422/RS-485 differential line receiver from Texas Instruments with 4 independent channels, Schmitt-trigger inputs, and a -55°C to 125°C operating range, housed in a 16-pin SOIC package. It is enhanced-product qualified for long-life military and harsh-environment applications.
Analog to Digital Converters - ADC 24-bit, 32-kSPS, 6-channel, simultaneous-sampling, delta-sigma ADC 32-QFN -40 to 125
Voltage References Automotive, low-drift, low-power, small-footprint series voltage reference 8-VSSOP -40 to 125
Use the download button to access the SN74LXCH8T245PWR schematic symbol, PCB footprint, and 3D model.
Use the download button to access the TCAN1146DMTRQ1 schematic symbol, PCB footprint, and 3D model.
CAN Interface IC Automotive enhanced CAN FD and high speed CAN transceiver with Watchdog, LIMP, and bus diagnostics 14-VSON -40 to 150
Use the download button to access the TLV7042DSGR schematic symbol, PCB footprint, and 3D model.
HCPL4502 OPTOCOUPLERS/OPTOISOLATORS
Operational Amplifiers - Op Amps 15
Radiation hardened, 3.5 V to 32 V, 6 A step down voltage converter in space enhanced plastic 30 WQFN 55 to 125
Operational Amplifiers - Op Amps 16-V, quad 4.5-MHz, rail-to-rail input/output, low-offset-voltage, low-noise op amp 14-QFN -40 to 125
Voltage References 1.235-V, 40 C to +85 C, micropower voltage reference diode 3-TO-92 -40 to 85
Encoders, Decoders, Multiplexers & Demultiplexers Dual 1-of-4 Data Slct/Mltpx W/3St Otp
The SN74F04DRQ4 is a hex inverter logic IC from Texas Instruments featuring six independent NOT gates in the fast F-series TTL logic family. It provides high-speed signal inversion with low propagation delay and is housed in a small outline (SOIC) package for surface-mount applications. Available in stock with worldwide shipping.
Texas Instruments TPS7A0333PYCHR is a 200mA nanopower LDO voltage regulator with only 200nA quiescent current in a tiny 4-pin DSBGA package. Fixed 3.3V output with 205mV typical dropout voltage, enable pin, and -40°C to +125°C temperature range. Available from stock worldwide with competitive pricing and fast shipping.
Use the download button to access the TMUX6208PWR schematic symbol, PCB footprint, and 3D model.
SP Amp Current Sense Amp Single 20V 5-Pin SOT-23 T/R
RS-232 Interface IC 3V-5.5V Multichannel RS-232 Line Drvr/Rec
Op Amp Dual Low Power Amplifier R-R I/O ±3V/6V Automotive 8-Pin SOIC T/R
Switching Controllers Dual-channel D-CAP+™, PMBus (N+M ≤ 12 phases) step-down, multiphase PWM controller 48-VQFN -40 to 125
Supervisory Circuits High-accuracy window supervisor with reset time delay 6-WSON -40 to 125
Current Sense Amplifiers Automotive AEC-Q100, -4-V to 110-V, 1.3-MHz current sense amplifier 5-SOT-23 -40 to 125
SP Amp Current Sense Amp Single 20V 5-Pin SOT-23 T/R
Texas Instruments TPS7A4533DCQR is a low-dropout (LDO) voltage regulator in a 5-pin SOT-223 package. It delivers a fixed 3.3V output with high accuracy and low noise, suitable for precision analog and RF applications. Available from authorized distributors with worldwide shipping.
The TPS7A4518DCQR is an LDO voltage regulator from Texas Instruments in a 5-pin SOT-223 package. Offers stable low-dropout regulation for powering sensitive analog and digital circuits with minimal noise. Available from stock with worldwide shipping.
Board Mount Hall Effect/Magnetic Sensors 2-dimensional, dual-channel, high-sensitivity, Hall-effect latch 5-SOT-23 -40 to 125
The INA281A5QDBVRQ1 is a Texas Instruments AEC-Q100 qualified current sense amplifier with a -4V to 110V common-mode input range, 1.3MHz bandwidth, and 120dB minimum CMRR, packaged in a 5-pin SOT-23 for automotive current monitoring. Rated for -40°C to 125°C operation. Available from stock with worldwide shipping.
Use the download button to access the INA281B1IDBVR schematic symbol, PCB footprint, and 3D model.
SP Amp Current Sense Amp Single 20V 5-Pin SOT-23 T/R
Encoders, Decoders, Multiplexers & Demultiplexers Dual 4-to-1 multiplexer with Schmitt-trigger inputs 16-SOIC -40 to 125
The UC1845J883B is a current-mode PWM controller IC with 200 mA output, 500 kHz switching frequency, and 8.2V to 30V input range in an 8-Pin CDIP ceramic package. Designed for military-grade switching power supply designs meeting MIL-STD-883 specifications. Available from stock with worldwide shipping.
SP Amp Current Sense Amp Single 20V 5-Pin SOT-23 T/R
Analog Comparators 800-ps high-speed rail-rail input comparator with LVDS outputs 6-SC70 -40 to 125
SN74LVC1G00DCKRE4 is a single 2-input NAND gate from Texas Instruments in the LVC logic family, supporting 1.65V to 5.5V operation with low power consumption and high-speed performance. The 5-pin SOT23 package provides an ultra-compact footprint ideal for space-constrained designs. Available from authorized distributors with worldwide shipping.
Supervisory Circuits Nanopower high-input voltage supervisor with manual reset and programmable-reset time delay 5-SOT-23 -40 to 125
TEXAS INSTRUMENTS - TLC272AIDR - Operational Amplifier, 2 Amplifier, 320 kHz, 3.6 V/µs, 3V to 16V, SOIC, 8 Pins
Logic-Buffers, Drivers, Receivers, Transceivers TSSOP-48 RoHS
Operational Amplifiers - Op Amps Automotive qualified, 2-channel 8-MHz, low-noise, low offset, RRIO general purpose CMOS op amp 8-SOIC -40 to 125
LDO Voltage Regulators Automotive 500-mA, low-IQ, high-PSRR, low-dropout (LDO) voltage regulator with power good</p 8-SON -40 to 125
Use the download button to access the INA229AIDGST schematic symbol, PCB footprint, and 3D model.
Operational Amplifiers - Op Amps 1.2-V ultra-low voltage, 350-kHz power saving single-channel op amp for battery powered systems 6-SOT-23 -40 to 125
The UC1842AJ883B is a military-grade current-mode PWM controller from Texas Instruments operating at up to 500 kHz with a 5 V reference, 1 A gate drive output, and 11–25 V input voltage range in a ceramic 8-pin DIP package meeting MIL-STD-883 screening. It integrates an oscillator, precision 5 V reference, cycle-by-cycle current limit, and undervoltage lockout for dependable off-line and DC-DC power conversion. Available from stock with worldwide shipping.
Need Integrated Circuit Components?
Get competitive quotes from authorized China distributors
Request a Quote