Integrated Circuit

Texas Instruments 5962R1222403VXC is a radiation-hardened adjustable positive LDO voltage regulator delivering up to 0.75 A with an input range of 2.3 V to 20 V and a 0.27 V typical dropout voltage in a 10-pin ceramic flatpack package. It provides precise 1.21 V to 20 V adjustable output for space-grade power rails. Available from stock worldwide.

SN74LS01DR is a quad 2-input NAND gate with open-collector outputs in a 14-pin SOIC package, operating from 0°C to 70°C commercial temperature range. It features four independent NAND gates with 8 mA open-collector sink current and 15 pF load capacitance rating, enabling wired-AND bus sharing and level shifting in 5 V digital logic systems.

Switching Voltage Regulators Low input voltage, 3-V output voltage, synchronous boost converter with integrated load switch 6-WSON -40 to 85

Use the download button to access the TMUX6209PWR schematic symbol, PCB footprint, and 3D model.

Supervisory Circuits Low-power voltage supervisor (reset IC) with active-low open-drain output 3-SOT-23 -40 to 125

Digital Signal Processors & Controllers - DSP, DSC Digital Signal Processor 144-NFBGA -40 to 100

LDO Voltage Regulators 300-mA, ultra-low-noise, low-IQ, low-dropout (LDO) linear regulator with high PSRR

Digital Signal Processors & Controllers - DSP, DSC Dig Media System- on-Chip

DAC 4-CH Resistor-String 12-bit 16-Pin TSSOP T/R

RS-422/RS-485 Interface IC 3.3-V to 5-V RS-485 transceiver with +/-8-kV IEC ESD protection

TXU0304PWR is a 4-channel unidirectional voltage-level translator from Texas Instruments supporting logic translation between 1.2 V and 5.5 V supply domains in a 14-pin TSSOP package. It features auto-direction sensing with no direction control pin and propagation delays under 4 ns. Available in stock worldwide with fast shipping.

Digital Signal Processors & Controllers - DSP, DSC Fixed-Point Digital Signal Processors 240-NFBGA 0 to 85

TPS2086DR is a integrated circuit for board-level control by Texas Instruments. Key specs: SOIC package, 16 pins, 85°C maximum. From inquiry pricing, in stock with worldwide shipping.

USB Interface IC Two-Port USB 2.0 Hub 48-HTQFP -40 to 85

Switching Controllers High density active clamp flyback controller, EMI dithering, x-cap discharge, bias power management

Texas Instruments LM1572MTC-3.3 is a current-mode step-down switching voltage regulator with fixed 3.3 V output. It accepts input voltages from 8.5 V to 16 V and provides a regulated 3.3 V rail. Housed in a 16-pin SOIC package for efficient DC-DC conversion in space-constrained designs.

Bus XCVR Single 8-CH 3-ST 20-Pin CDIP Tube

Mixed‑Signal Microcontroller, QFP64

Gate Drivers Automotive 1.5-A source, 2-A sink, 5.7-kVRMS opto-compatible single-channel isolated gate driver 6-SOIC -40 to 125

Digital to Analog Converters - DAC

CD54HC373F3A is an 8-channel transparent D-type latch with 3-state outputs from Texas Instruments, housed in a 20-pin ceramic DIP package. It operates across the HC/UH family supply range of 2 V to 6 V, handles up to 50 pF load capacitance, and provides 7.8 mA output sink current. Available from stock with worldwide shipping.

Board Mount Current Sensors 100-V Hall-effect current sensor with internal reference 8-SOIC -40 to 85

The V62/21610-01XE-T is a 4-channel digital isolator from Texas Instruments designed for high-reliability and space-rated applications. It provides galvanic isolation across 4 independent signal channels, operates over industrial temperature ranges, and is housed in a 16-pin SSOP package for compact PCB integration.

1-A Low Dropout Regulator

Voltage References Automotive, low-drift, low-power, small-footprint series voltage reference 8-VSSOP -40 to 125

LM4990ITLX/NOPB is an operational amplifier by Texas Instruments. Key specs include Bandwidth-Nom: 20 kHz; Gain: 23.8 dB. From RFQ price checks to worldwide shipping, FindMyChip supports sourcing.

I²C controlled, 1- to 4-cell, 3-A buck battery charger with dual-input selector and integrated ADC

V62/21610-01XE is a 4-channel digital isolator providing galvanic isolation up to 2500 Vrms for logic signals up to 150 Mbps data rate. It operates from 2.7 V to 5.5 V in a 16-pin SSOP package, suitable for industrial and mil-spec interface isolation applications.

Digital to Analog Converters - DAC Single-channel output voltage, 10-bit, smart DAC with GPIO trigger and function generator 8-WSON -40 to 125

LMV324SIPW is a quad low-voltage rail-to-rail operational amplifier in a 14-pin TSSOP package by Texas Instruments. It operates from 2.7 V to 5 V supply with 1 MHz gain-bandwidth and low input offset. Available from stock worldwide at competitive pricing.

The LM2936QMMX-3.3/NOPB is an automotive-qualified 3.3V fixed positive LDO linear voltage regulator from Texas Instruments with 50mA output current and ultra-low dropout voltage of 0.2V nominal. It accepts input voltages from 6V to 60V maximum in a compact 8-pin VSSOP package. Available from authorized distributors with worldwide shipping.

Motor/Motion/Ignition Controllers & Drivers 35V, 2A bipolar stepper or dual brushed motor driver with integrated current sensing

LM2941GW/883 is a military-grade adjustable LDO linear voltage regulator from Texas Instruments in a 16-pin SOIC package. It accepts inputs from 6 V to 26 V with a typical dropout of 0.5 V and provides an adjustable output for precision voltage rails. Sourced globally for high-reliability aerospace and defense power supply designs.

The LM10010SDX/NOPB is a 6-bit VID voltage programmer IC from Texas Instruments for point-of-load switching regulators. It operates from 3 V to 5.5 V supply with voltage-mode control and is housed in a 10-pin SOIC No-Lead package. RoHS-compliant with lead-free finish, available in volume for power system design.

1080p oLDI Dual FPD-Link III Serializer with HDCP

LM34925SDX/NOPB is a voltage-mode constant on-time switching regulator controller from Texas Instruments in an 8-pin SON package. It operates across a wide 9 V to 100 V input range with a 48 V nominal target for industrial and telecom power supplies. Available Pb-free in stock worldwide for demanding high-voltage step-down converter designs.

LM20123QMHE/NOPB is an automotive-grade 3A synchronous step-down DC/DC converter by Texas Instruments in a small outline package. Key specs: 3A output current, high-efficiency synchronous conversion, AEC-Q100 automotive qualification, and lead-free NOPB construction. Available in stock with worldwide shipping.

Use the download button to access the LM2904BAIPWR schematic symbol, PCB footprint, and 3D model.

480Mbps Deserializer 1 Input 6 Output 196-NFBGA (15x15)

The LM3880QMFX-1AD/NOPB is a 3-channel power supply sequencer IC from Texas Instruments in an automotive-grade qualification, featuring a maximum package height of 1.45mm in a 6-pin SOT-23 plastic package for controlling the power-up and power-down sequence of multiple supply rails. It provides reliable supply sequencing for multi-rail systems without requiring external discrete timing components. Available from stock worldwide with fast shipping.

The LM3S3749-IQC50-A0 is a 32-bit ARM Cortex-M3 microcontroller from Texas Instruments, clocked up to 50MHz with integrated ADC, DMA channels, and JTAG boundary scan in a quad flat package. It features fixed-point processing, on-chip peripherals, and a lead-free package for embedded control applications. Available from authorized distributors with worldwide shipping.

ARM® Cortex®-M3 series Microcontroller IC 32-Bit 50MHz 128KB (128K x 8) FLASH 64-LQFP (10x10)

Adjustable, precision micropower shunt voltage reference with 1% accuracy

The LM4050QCIM3-2.0/NOPB is a precision micropower shunt voltage reference from Texas Instruments with a 2.048V nominal output. It features tight output accuracy between 2.0308V and 2.0652V and is housed in a miniature 3-Pin SOT-23 package. Available from stock worldwide with fast shipping for high-accuracy analog measurement and ADC reference applications.

The Texas Instruments LM358DGKR-JF is a dual general-purpose operational amplifier optimized for single-supply operation from 3V to 32V (or ±1.5V to ±16V dual supply) in a small outline package. It provides two independent op-amp channels with wide bandwidth and low input offset voltage suitable for signal conditioning and filtering. Available from stock with worldwide shipping.

Industry-Standard Dual Operational Amplifiers

Analog Comparators Quad Differential

ARM® Cortex®-M3 series Microcontroller IC 32-Bit 50MHz 256KB (256K x 8) FLASH 100-LQFP (14x14)

Operational Amplifiers - Op Amps Quad General

The LM317MQDCYRBO is a three-terminal adjustable positive linear voltage regulator delivering 500 mA output current over a 1.25V to 37V adjustable range. It offers excellent line and load regulation with built-in thermal overload and short-circuit protection in a SOT-223 package. AEC-Q100 qualified for automotive use, available with worldwide shipping.