Integrated Circuit
Integrated Circuit components are essential building blocks in modern electronic systems. FindMyChip sources Integrated Circuit ICs from authorized China distributors with competitive pricing and reliable stock.
77,666 components
How to Choose Integrated Circuit Components
- 1Verify electrical specifications (voltage, current, frequency) match your design requirements.
- 2Check package footprint and thermal characteristics against your PCB layout constraints.
- 3Confirm lifecycle status and long-term availability for production designs.
Popular Applications
Consumer Electronics
Smartphones, tablets, and smart home devices
Industrial Systems
Factory automation, control systems, and monitoring
Automotive
In-vehicle electronics and advanced driver assistance
Telecommunications
Base stations, routers, and network equipment
Integrated Circuit Guides & Articles
STM32H725IGT3 High-Performance MCU Design Guide
Design STM32H725IGT3 systems for reliable 550 MHz operation with practical power, clock, cache, DMA, PCB, ADC, and recovery guidance.
Jul 31, 2026
150141VS73100 Violet SMD LED Selection Guide: Color, Drive, and Sourcing
Select the 150141VS73100 by wavelength, brightness, drive current, 3528 fit, reliability, and traceable sourcing requirements.
Jul 31, 2026
STEF05SGR 5 V eFuse Protection Design Guide
Design a reliable 5 V STEF05SGR eFuse stage with current-limit math, capacitor sizing, thermal analysis, fault recovery, and PCB layout guidance.
Jul 30, 2026
S1J-E3/61T Rectifier Thermal Design, Surge, and Derating Guide
Practical S1J-E3/61T design guidance for thermal limits, inrush surge, PCB layout, voltage margin, and current derating.
Jul 30, 2026
All Integrated Circuit Components
Showing 45,551–45,600 of 77,666
Texas Instruments LM358LVIDGKT is a dual general-purpose operational amplifier with 2 independent op-amp circuits in a single package. It operates from a wide supply voltage range and is housed in an 8-pin SOIC for compact PCB designs. Suited for signal conditioning, comparator, and filtering applications in industrial and consumer electronics.
DRV8434E/P Dual H-Bridge Motor Driver With Integrated Current Sense and Smart Tune Technology
The LM2902KAVQDRDL is a quad general-purpose operational amplifier from Texas Instruments with AEC-Q100 automotive qualification and 0.8 mA typical supply current. It operates from a wide single-supply voltage range in a 14-pin SOIC package for automotive and industrial signal conditioning. Available worldwide in tape-and-reel packaging for high-volume production.
Texas Instruments LM3492HCMHX/NOPB is a 2-channel LED display driver with 6-segment control capability in a 20-pin SOIC package. It delivers accurate constant current output for driving LED strings in industrial and consumer display applications. Available lead-free and widely stocked for worldwide shipping.
Operational Amplifiers - Op Amps Industry-standard dual operational amplifier 8-SOIC -40 to 85
LM339N-P2 is a quad differential voltage comparator by Texas Instruments in a 14-pin DIP package. Key specs: 2 V to 36 V single or ±1 V to ±18 V dual supply, open-collector outputs, four independent channels. From competitive pricing, in stock with worldwide shipping.
Texas Instruments LM34925MRX/NOPB is a voltage-mode constant-on-time switching regulator controller with 9 V to 100 V input range and nominal 48 V operation. It provides robust power conversion for industrial and telecom applications in an 8-pin SOIC package. Available from stock worldwide with Pb-free, RoHS-compliant construction.
LED Lighting Drivers
Operational Amplifiers - Op Amps 1.2-MHz industry standard dual-channel amplifier with -40 C to 125 C operation 8-VSSOP -40 to 125
Use the download button to access the LM339LVQPWRQ1 schematic symbol, PCB footprint, and 3D model.
Analog Comparators Low-voltage commodity comparator 14-TSSOP -40 to 125
The LM2904PWR-JF is a dual general-purpose operational amplifier from Texas Instruments with voltage-feedback architecture and 65 dB minimum CMRR. It features 7 mV maximum input offset voltage and 0.5 µA maximum bias current in an 8-pin TSSOP package. Available worldwide for signal conditioning, comparator, and active filter applications.
Maximum rating: up to 38 V – ESD rating (HBM): 2k V – Low input offset: 0.37 mV – Low input bias current: 3.5 nA – Low supply-current: 200 µA per
Use the download button to access the LM2904BTQDGKRQ1 schematic symbol, PCB footprint, and 3D model.
LM20145QMHX/NOPB is an automotive-grade synchronous step-down DC/DC switching regulator by Texas Instruments in a 16-pin SO package. Key specs: 2.95 V to 5.5 V input, adjustable output down to 0.8 V, current-mode PWM control. Available from stock with worldwide shipping.
Switching Regulator IC Output
Dual general-purpose operational amplifier with single-supply operation from 3V to 32V and low quiescent current of 0.5mA per amplifier. Features input common-mode voltage range that includes ground for single-supply signal conditioning in the compact 8-pin VSSOP package. Available in tape and reel with worldwide shipping.
Use the download button to access the LM2904BAIDGKR schematic symbol, PCB footprint, and 3D model.
LED Driver IC 4 Output DC DC Regulator Switched Capacitor (Charge Pump) PWM Dimming 30mA 14-WSON (4x3)
The LM111J-8RLQMLV is a QML-qualified precision voltage comparator with 3 mV maximum input offset voltage and 0.1 µA bias current at 25°C, operating up to ±18V supply in a hermetic 8-pin ceramic DIP package for high-reliability applications. Available from stock with worldwide shipping.
Use the download button to access the LM2903BQDDFRQ1 schematic symbol, PCB footprint, and 3D model.
Analog Comparators Automotive qualified dual differential commodity comparator 8-VSSOP -40 to 125
LM22670MRX-ADJ/J7002408
The LM2901DRSV is a quad differential comparator by Texas Instruments featuring 4 independent voltage comparators with open-collector outputs in a small outline package. It operates from 2 V to 36 V single supply or plus or minus 1 V to plus or minus 18 V dual supply. Available from stock worldwide with competitive pricing.
Operational Amplifiers - Op Amps Automotive-grade, quad, 5.5-V, 1-MHz, 3-mV offset voltage op amp
Switching Voltage Regulators Dual 2.0A Hi Freq Sync SD DC-DC Reg
PLASTIC QUAD FLATPACK - NO LEAD
Switching Voltage Regulators SIMPLE SWITCHER® 4.5V to 40V, 3A Low Component Count Step-Down Regulator 5-TO-220
Texas Instruments LM2677SD-3.3/NOPB is a fixed 3.3 V, 5 A PWM buck switching regulator operating from 8 V to 40 V input in a 14-pin VDFN exposed-pad package. Voltage-mode PWM control provides stable regulation across varying load conditions at a nominal 12 V bus. Available from stock worldwide with Pb-free, RoHS-compliant construction.
JL147BCA is a precision voltage-feedback operational amplifier from Texas Instruments with 80dB minimum CMRR and 0.02µA input offset current. It features internal frequency compensation and ultra-low bias current of 0.05µA in a ceramic DIP package. Available in stock with worldwide shipping.
LM2594, LM2594HV SIMPLE SWITCHER® Power Converter 150-kHz 0.5-A Step-Down Voltage Regulator
LM22672MRX-5.0S1 is a 5.0V fixed-output step-down (buck) switching regulator from Texas Instruments with up to 1A output current and wide input voltage range. Features internal MOSFET, current-mode control, and SO-8 package for compact power supply designs. Available in stock worldwide with fast global shipping at competitive prices.
The 5962-9673802VCA is a military-grade quad differential comparator from Texas Instruments in a 14-pin ceramic DIP package. It features 4 independent comparators with open-collector outputs, 2000 µV maximum input offset voltage, and 0.3 µA maximum bias current for precision signal comparison. Available worldwide with fast shipping for aerospace and defense applications.
The LM20125QMHX/NOPB is an automotive-grade 2.5A synchronous step-down DC-DC regulator with adjustable output voltage in a small outline package. Features 2.95V to 5.5V input range with high-efficiency switching for automotive power management. Available from stock with worldwide shipping.
LM20154QMHE/NOPB is an automotive-qualified 4-A synchronous step-down DC-DC converter by Texas Instruments designed for automotive infotainment and ADAS power rails. Key specs: 3 V to 36 V input range, adjustable output, 500 kHz switching frequency, in a small MLP package. Available from stock with worldwide shipping.
The LM22670QTJE-5.0/NOPB is a 3 A step-down (buck) switching voltage regulator with a fixed 5.0 V output in a compact 7-pin PSSO package. It operates from 4.5 V to 42 V input with voltage-mode PWM control for automotive and industrial power applications. Available from Texas Instruments with worldwide shipping.
Texas Instruments LM20134QMHX/NOPB is an automotive-qualified quad-output LDO linear regulator designed for multi-rail power distribution in vehicle systems. Offers four independent low-dropout outputs in a compact small outline package. AEC-Q100 qualified, in stock worldwide shipping.
2-Apr-2021 — 7.6 Parameter Drift: 0.5–A IOUT Devices (LM117H, LM117GW) ... •Military - QML certified for Military and Defense Applicati
Comparator Single ±15V/30V 14-Pin CDIP Tube
LM124AJ/883/MABI is a military-grade quad operational amplifier with four independent op-amps operating from a single 3 V to 32 V supply or dual ±1.5 V to ±16 V rails, featuring 1 MHz gain-bandwidth, 3 mV maximum input offset voltage, and a -55°C to 125°C military temperature range. Packaged in a hermetically sealed ceramic DIP for MIL-STD-883 environments. Available from stock with worldwide shipping.
Bipolar Motor Driver NMOS PWM, Step/Direction 28-HTSSOP
Military-grade dual operational amplifier with 32V supply voltage, 700kHz gain-bandwidth product, and ceramic dual-in-line package. Designed for precision signal conditioning in harsh environments. Available from authorized distributors with worldwide shipping.
JL148SCA is a operational amplifier IC by Texas Instruments. Key specs: Ceramic DIP package, 14 pins, -55°C to 125°C. From inquiry pricing, in stock with worldwide shipping.
The LM111J-8/883 is a high-precision single voltage comparator in an 8-pin ceramic DIP package, rated for military-grade operation with supply voltages up to ±18V. It features a maximum input offset voltage of 3000 µV and maximum bias current of 150 nA. Available from authorized distributors with worldwide shipping.
Texas Instruments JL101ABCA is a military-grade single operational amplifier with 40V supply and 1 MHz bandwidth in a ceramic DIP package. Key specs: 80 dB minimum CMRR, 0.075 µA maximum bias current at 25°C, voltage-feedback architecture. Available from authorized distributors with worldwide shipping for defense and aerospace applications.
The LM111WGRLQMLV is a high-precision voltage comparator IC from Texas Instruments, featuring a maximum input offset voltage of 3000µV and a maximum bias current of 0.15µA for accurate signal comparison. It operates with dual supply voltages up to ±18V nominal and is housed in a 10-pin GDSO small outline surface-mount package. Available from authorized distributors with worldwide shipping.
The PDRV5055Z3QDBZR is an automotive-qualified ratiometric linear Hall effect sensor from Texas Instruments, delivering an analog output voltage proportional to magnetic field strength in a compact 3-pin SOT-23 package. It is AEC-Q100 qualified for reliable operation in harsh automotive environments across wide temperature ranges. Available in stock with worldwide shipping at competitive pricing.
LM10500SQ-1.0/NOPB is a Texas Instruments integrated circuit for electronic designs. Key specs include 29 pins, HVQCCN, and datasheet-backed parameters. From inquiry quote with in stock worldwide shipping support.
Automotive, general-purpose, quad-channel, 4/0 digital isolator
Current Sense Amplifiers Quad-channel, 110-V, high-voltage, high-bandwidth, unidirectional current sense amplifier 16-VQFN -40 to 125
Need Integrated Circuit Components?
Get competitive quotes from authorized China distributors
Request a Quote