Integrated Circuit
Integrated Circuit components are essential building blocks in modern electronic systems. FindMyChip sources Integrated Circuit ICs from authorized China distributors with competitive pricing and reliable stock.
77,666 components
How to Choose Integrated Circuit Components
- 1Verify electrical specifications (voltage, current, frequency) match your design requirements.
- 2Check package footprint and thermal characteristics against your PCB layout constraints.
- 3Confirm lifecycle status and long-term availability for production designs.
Popular Applications
Consumer Electronics
Smartphones, tablets, and smart home devices
Industrial Systems
Factory automation, control systems, and monitoring
Automotive
In-vehicle electronics and advanced driver assistance
Telecommunications
Base stations, routers, and network equipment
Integrated Circuit Guides & Articles
STM32H725IGT3 High-Performance MCU Design Guide
Design STM32H725IGT3 systems for reliable 550 MHz operation with practical power, clock, cache, DMA, PCB, ADC, and recovery guidance.
Jul 31, 2026
150141VS73100 Violet SMD LED Selection Guide: Color, Drive, and Sourcing
Select the 150141VS73100 by wavelength, brightness, drive current, 3528 fit, reliability, and traceable sourcing requirements.
Jul 31, 2026
STEF05SGR 5 V eFuse Protection Design Guide
Design a reliable 5 V STEF05SGR eFuse stage with current-limit math, capacitor sizing, thermal analysis, fault recovery, and PCB layout guidance.
Jul 30, 2026
S1J-E3/61T Rectifier Thermal Design, Surge, and Derating Guide
Practical S1J-E3/61T design guidance for thermal limits, inrush surge, PCB layout, voltage margin, and current derating.
Jul 30, 2026
All Integrated Circuit Components
Showing 43,751–43,800 of 77,666
11 Bit Analog to Digital Converter 2 Input 2 Pipelined 64-VQFN (9x9)
HVQCCN-40
HVQCCN-64
ADS62P24IRGCR is a dual-channel 12-bit pipelined ADC from Texas Instruments with ±2 V analog input range and 0.0488% maximum linearity error. It features two simultaneous sampling channels with proprietary conversion architecture optimized for high dynamic range. Available in 64-pin VQFN 9x9 mm package, in stock worldwide with fast shipping.
Analog to Digital Converters - ADC 24-bit, 32-kSPS, 3-channel, simultaneous-sampling, delta-sigma ADC 20-TSSOP -40 to 125
Digital Signal Processors & Controllers - DSP, DSC Dig Media System-on- Chip
Buffers & Line Drivers Sngl FET Bus Switch w/Level Shifting
HVQCCN-64
Texas Instruments ADS4142IRGZR is a 14-bit, single-channel pipelined analog-to-digital converter supporting a ±2 V peak-to-peak input voltage range. It features low DNL/INL linearity error and is housed in a compact 48-pin VQFN (7×7 mm) package for space-constrained designs. Available in global stock with worldwide shipping for rapid prototyping and production.
Supervisory Circuits Automotive high-accuracy window supervisor with reset time delay
HVQCCN-48
72QFN
Voltage References 100-ppm/ C precision micropower shunt voltage reference 3-SOT-23
HVQCCN-64
HVQCCN-48
Buffers & Line Drivers Octal Buffer Driver
Digital Signal Processors & Controllers - DSP, DSC Digital Media SOC
Use the download button to access the ADC3223IRGZR schematic symbol, PCB footprint, and 3D model.
Single-channel, 18-bit, 65-MSPS, low-noise, ultra-low-power ADC
FBGA-144
10-Bit, 500kSPS, 1-Ch SAR ADC with SPI
Texas Instruments DM368ZCEZ is a DaVinci digital media processor combining DSP and ARM cores for video encoding and processing, operating from 1.28 V to 1.42 V core supply in a 338-pin LFBGA package. It supports 0°C to 85°C commercial temperature range and 260°C peak reflow, making it suitable for embedded video and surveillance systems. Available RoHS-compliant from authorized distributors with worldwide shipping.
ADC12DJ4000RFAAVT is a dual-channel 12-bit analog-to-digital converter from Texas Instruments sampling at up to 4 GSPS per channel in a 144-pin FBGA package. Supports ±0.8 V differential analog input range with proprietary high-speed conversion architecture. Available from stock globally with fast worldwide shipping.
Analog to Digital Converters - ADC Automotive quad-channel, 9-bit, 1.3-GSPS analog-to-digital converter (ADC) with JESD204C interface 144-FCBGA -40 to 125
74ACT16244DGGR-NG is a 16-channel bus buffer by Texas Instruments with TTL-compatible CMOS inputs and 3-state outputs operating from 4.5 V to 5.5 V. Key specs: 16 outputs, 3-state control, 4.5 V–5.5 V supply, SSOP package. Available from stock with worldwide shipping.
ADC08DJ5200RFAAV is a high-speed RF-sampling 8-bit ADC from Texas Instruments, offering dual-channel 5.2 GSPS or single-channel 10.4 GSPS operation in a 144-pin BGA package. It enables direct RF sampling up to 10 GHz with low noise and JESD204C output interface. Available from stock worldwide with fast shipping.
FBGA-144
CDC5801DBQG4 is a Texas Instruments low-jitter PLL-based clock multiplier and divider IC in a 24-pin SSOP package. It provides 1 true output and 1 inverted output for clock distribution, with standard input conditioning suitable for synchronous digital systems. Ideal for telecommunications, networking equipment, and high-speed digital systems requiring precise clock synthesis and low-jitter distribution.
Precision Amplifiers Single micro-power, high-precision, wide bandwidth RRIO op amp with e-Trim
Operational Amplifiers - Op Amps 2.2-nV/vHz, low-power, 36-V operational amplifier
Operational Amplifiers - Op Amps Single-channel high-speed standard op amp
The VCBU68WMCE30 is a Texas Instruments DaVinci Digital Media Processor in a 338-NFBGA package, supporting video and multimedia processing at 1.28 V to 1.42 V supply, with 20 integrated specs for embedded system designs. Available in stock worldwide.
Texas Instruments VS3674UNION is a DaVinci Digital Media Processor in a 338-pin NFBGA package, featuring a supply voltage range of 1.28 V to 1.42 V for advanced DSP and multimedia applications. Available from stock with worldwide shipping.
TPS3813K33-EP is an enhanced-product supervisory circuit with a fixed 3.3 V undervoltage threshold, integrated watchdog timer, and manual RESET input in a 6-pin SOT-23 package. It monitors processor supply rails and asserts a reset signal during power-up or fault conditions, with a programmable watchdog timeout. Designed for DSP and microprocessor initialization in industrial and extended-temperature embedded systems.
Digital Signal Processors & Controllers - DSP, DSC Dig Media SOC
DS90UB913QSQ/NOPB is a 10/12-bit FPD-Link III serializer for automotive camera interfaces by Texas Instruments. Key specs: up to 800 MHz pixel clock, 100 Mbps to 2.5 Gbps serial link, 32-pin QFN package. From $4.20, in stock with worldwide shipping.
Use the download button to access the TPS54972PWPR schematic symbol, PCB footprint, and 3D model.
Switching Voltage Regulators 3-Amp Flyback Reg
TEXAS INSTRUMENTS - OPA2172ID . - Operational Amplifier, Dual, 2 Amplifier, 10 MHz, 10 V/µs, 4.5V to 36V, ± 2.25V to ± 18V, SOIC
JFET Ultra-low noise, low gate current, audio, N-channel JFET
Use the download button to access the DLPC900AZPC schematic symbol, PCB footprint, and 3D model.
Use the download button to access the TAS5760MTDAPQ1 schematic symbol, PCB footprint, and 3D model.
UCC2570D is a low-power pulse width modulation controller IC supporting voltage-mode and current-mode control with 10 V to 13 V input range in a 14-pin SOIC package. Available from stock worldwide at competitive pricing.
Voltage References Automotive, low-drift, low-power, small-footprint series voltage reference 8-VSSOP -40 to 125
Texas Instruments TLV3601-Q1 is an AEC-Q100 qualified single-channel high-speed comparator with a propagation delay of 4.5 ns, operating from 2.7 V to 5.5 V supply. Packaged in a tiny 5-pin SC70 package for space-constrained automotive and industrial designs.
OPA2604APG4 is a dual FET-input precision operational amplifier from Texas Instruments with 100 dB typical common-mode rejection ratio and 0.0001 µA maximum bias current in an 8-pin DIP package. It delivers wide bandwidth and low noise for high-fidelity audio and precision instrumentation circuits. Available from stock with worldwide shipping.
Switching Voltage Regulators
Use the download button to access the TUSB501TDRFRQ1 schematic symbol, PCB footprint, and 3D model.
Super Speed Single Channel Redriver USB 3.0 3.3V T/R 8-Pin WSON EP
IC TXRX INVERT 5.5V 20SOIC
Need Integrated Circuit Components?
Get competitive quotes from authorized China distributors
Request a Quote